Professional Documents
Culture Documents
Tialoc Group
Tialoc Singapore Pte Ltd Tialoc Malaysia Environmental Sdn Bhd Tialoc (Shanghai) Environmental Ltd
108 Pasir Panjang Road, Suite 2.09, KHTP Business Centre, No. 159 Tianzhou Road,
#01-01 Golden Agri Plaza Kulim High Tech Park, Block 12, 4 Floor
Singapore 118535 09000, Kulim, Kedah, Malaysia Shanghai 200233 P.R.China
T: +65 6341 5018 T: +604 403 9188 T: +86 21 6093 2448
F: +65 6396 6018 F: +604 403 1388 F: +86 21 5094 6669
Email: info@tialocgroup.com
Website: www.tialocgroup.com
BUSINESS SECTIONS
Tialoc group has developed four core business units / lines, they are
Comprising manufacturing locations in China and Malaysia, this division houses its own
specialised detailed design group and senior professionals with many years of hands on
COMPOSITE experience in the field of FRP, thermoplastics and advanced composite material design
and manufacturing. Tialoc Composites follows European design and manufacturing
standards with experienced German engineers and supervisors in all manufacturing
locations. All manufacturing locations are third party certified by TUV to German DVS
standards.
This new established business section allows the company to actively pursue
comprehensive solutions of waste management for clients. They are consolidating
industrial plant environmental management system, providing waste and wastewater
ENVIRONMENTAL treatment plant build and operation (such as BOO/BOOT), developing waste recycling
MANAGEMENT and energy recovery technology (such as waste salt recycling, wasted activated carbon
re-generation, soil remediation, sludge deep de-watering, industry microwaving
catalysis and pyrolysis, ‘zero landfill' solution), and its engineering realization. Especially
for hazardous waste management, treatment and plant operation service.
LOCATIONS WHERE WE ARE
Tialoc Environmental Group
originated in Germany and now
supports operations across five
continents. The Asia headquarters,
located in Singapore was founded in
2000, with Tialoc China and Tialoc
Malaysia– our two largest
operations- founded very shortly
after. Tialoc Singapore has currently
around 100 permanent staff.
Tialoc China and Tialoc Malaysia are Other Asia locations include Thailand, Vietnam, Indonesia, Taiwan, and
currently the Group’s two largest Middle East. Vietnam market has developed extremely rapidly in recent
operations, each with about 200 and years. With strong co-operation with other subsidiary corporations,
350 permanent staff, and still Vietnam tops the Tialoc group in business growth and profitability.
counting. Tialoc China has several
subsidiary corporations: the main
business centre is based in Shanghai Asia, especially China and Southeast Asia, are still the focus of the Group’s
while the fabrication arm Tialoc expansion. Our team in each business area are becoming more and more
Composite workshop is located in localized. With the experience and transparent achievement accumulated
Zhejiang Huzhou. Our Malaysia office in the past 18 years, Tialoc has established its reputation in this field as a
and Tialoc Composite workshop are reliable partner and enjoys good relation with client and local government.
located in Kulim near Penang in the
North- East of the Country, providing
Environmental Technologies,
Bag Filter
Scrubber Unit
WATER & WASTE WATER TECHNOLOGIES
Advantages:
o In-house selection of materials, piping design calculations
o Excellent resistance to a wide variety of fluids
and a full suite of drafting capabilities including 3D and
o Really high surpasses cast iron, steel, stainless
isometric drawings.
steel, concrete
o Better fatigue endurance limits than metals o Pipes designed to international standards such as AD-
o Pipe weight is only 10% of comparable Merblatt N1, DIN EN 13121-4, DIBt40-B1/B2, BS4994.
concrete pipe Only 26% of comparable steel o Design temperatures up to 160 degrees and 16 bar
pipe pressure.
o Non conducive electrical properties,
o Options to be fabricated from pure plastic, pure FRP or
Conducive properties can be tailored into
dual-laminate (plastic lined FRP).
design
o Maintains critical dimensional tolerance well o Antistatic, wear resistant and fire retardent additives
o Does not undergo corrosive attack over time available.
Easier to clean and maintain smooth wall o Materials of construction from premium suppliers such
conditions Minimal environmental protection
as Roechling, Symalit, Agru, Ashland, DSM and Saint
required
Gobain.
o Wide selection of plastic in liners, such as PE, PVC, PP,
PVDF, ECTFE, PFA, FEP or pure FRP.
Plastic Lining
o Current fabrication capabilities to produce pipes up to
Intermediate 12m long, and 6.5m diameter. Larger pieces can be
Fabric/Bonding Layer
fabricated upon request.
FRP Reinforcement o Complete, modular construction of piping systems.
o On-site installation and project management capabilities
in many regions globally.