You are on page 1of 2

Cemfair Smooth

Cemen ous skim coat and smooth pu y plaster for internal applica ons

Description
Technical Properties:
Cemfair Smooth is a polymer modified cemen ous skim
Colour: White
coat, smooth finishing and wall pu y specially designed
to be over painted by decora ve paints in internal Fresh wet density: 1.7 ± 0.1 g/cm3
applica ons.
Working me: 90 - 150 min
Cemfair Smooth composed of unique composi on of Applica on thickness: Up to 2 mm
cement, limestone, dry powders, selected polymers and
special addi ves which when mixed with water produces Compressive
a creamy paste suitable for smoothing and filling small strength:* ≥ 6.5 MPa @ 28 days
cracks and pinholes on ver cal and overhead surfaces in ASTM C109/C109M
dry or humid condi ons. Flexural strength:*
≥ 3 MPa @ 28 days
ASTM C348
Applications
Bond stregnth:
≥ 0.8 MPa @ 28 days
 Skim coat and smooth pu y over fairfaced concrete EN 1542
and cement based plaster to provide a smooth surface Abrasion resistance:
ready to be painted. (500 g, 500 cycles)
 Filling small cracks, scratches and pinholes. ASTM D4060, weight
0.8 g @ 28 days
loss CS17 wheel
Advantages
*Note: dry cure for compressive and flexural strengths.
 Shrinkage controlled cemen ous plaster.
 Easy to apply, provides a smooth surface that can be Mixing
easily hand sanded
 One component, requires only addi on of water. To ensure proper mixing, a mechanically powered mixer
 Thixotropic proper es, suitable for ver cal or drill fi ed with a suitable paddle should be used.
applica ons.
 Easily applied by scraper or pu y knife. 7.4 - 7.8 litres of clean water for each 20 kg bag should
 Easily sanded to a smooth surface. be added to a clean container. The powder should then
be added slowly while mixing con nuously at 400 - 600
Method of Use rpm, mixing me should be con nued un l uniform
consistency is obtained. Leave the mix for 5 minutes and
Substrate Preparation s r again.

Substrate must be clean and free from oil, grease, dust Placing and Finishing
and laitance.
The suitable thickness of applica on is up to 2 mm per
Priming coat using stainless steel scraper or pu y knife. If higher
thickness is required another layer should be applied
Normally, no primer is required for the applica on of a er the first layer has ini ally set using wet on wet
Cemfair Smooth. However, areas to be plastered should technique. At higher applied thicknesses, small hair
be soaked with clean water before applying the plaster, cracks may appear.
except for gypsum and plaster boards.
A er drying, the surface can be smoothed using fine sand
paper
Cemfair Smooth
More from Don Construction Products
Cleaning
A wide range of construc on chemical products are
All tools should be cleaned immediately using clean manufactured by DCP which include:
water, hardened material should be cleaned using proper
mechanical means.  Concrete admixtures.
 Surface treatments
Packaging  Grouts and anchors.
 Concrete repair.
Cemfair Smooth is available in 20 kg bags.  Flooring systems.
 Protec ve coa ngs.
Yield  Sealants.
 Waterproofing.
Approximately 16.5 litre per 20 kg bag, which is enough  Adhesives.
to cover 16.5 m2 per 20 kg bag @ 1 mm thickness.  Tile adhesives and grouts.
 Building products.
Storage  Structural strengthening.

Cemfair Smooth has a shelf life of 12 months from date of


manufacture if stored at temperatures between 5°C and
35°C in original unopened bags.

If these condi ons are exceeded, contact DCP Technical


Department for advice.

Cautions

Health and Safety

Cemfair Smooth may cause irrita on to skin or eyes. In


case of accidental contact with eyes, immediately flush
with plenty of water for at least 10 minutes and seek
medical advice if necessary.

For further informa on, refer to the Material Safety Data


Sheet.

Fire

Cemfair Smooth is nonflammable.

Note:
11-0076-A-2021

tĞĞŶĚĞĂǀŽƵƌƚŽĞŶƐƵƌĞƚŚĂƚĂŶLJŝŶĨŽƌŵĂƟŽŶ͕ĂĚǀŝĐĞŽƌƌĞĐŽŵŵĞŶĚĂƟŽŶǁĞŵĂLJŐŝǀĞŝŶ
ƉƌŽĚƵĐƚ ůŝƚĞƌĂƚƵƌĞ ŝƐ ĂĐĐƵƌĂƚĞ ĂŶĚ ĐŽƌƌĞĐƚ͘ ,ŽǁĞǀĞƌ͕ ďĞĐĂƵƐĞ ǁĞ ŚĂǀĞ ŶŽ ĐŽŶƚƌŽů ŽǀĞƌ
ǁŚĞƌĞĂŶĚŚŽǁƉƌŽĚƵĐƚƐĂƌĞĂƉƉůŝĞĚ͕ǁĞĐĂŶŶŽƚĂĐĐĞƉƚĂŶLJůŝĂďŝůŝƚLJĂƌŝƐŝŶŐĨƌŽŵƚŚĞƵƐĞŽĨ
ƚŚĞƉƌŽĚƵĐƚƐ͘

You might also like