Professional Documents
Culture Documents
Training: Anti-Jamming Valve
Training: Anti-Jamming Valve
B T
A P
PX PX
B
A
T
Anti–jamming
valve (34)
The setting of the anti–jamming valve (34) determines the reacting point of the automatics. The
valve monitors the pressure in the rotation pressure line.
1. Start the diesel engine and set it to max. speed.
2. Start drilling.
3. Adjust the feed pressure according to rock type and drill bit size.
4. Open the anti–jamming valve adjusting screw until the anti–jamming automatics reacts.
5. Close the adjusting screw 2–3 turns. Correct setting depends on the rock type and the
drilling conditions, varying between 70 and 110 bar (factory setting is 70–80 bar).