Professional Documents
Culture Documents
December 2020 Monthly Operations & Maintenance Report
December 2020 Monthly Operations & Maintenance Report
GENERAL MANAGER
Dear Sir:
The maintenance team is pleased to present the attached Monthly report. Included is a detailed
report of operation and maintenance of Mill B and motor vehicle for the month of December.
The maintenance team welcomes any comments or questions on this report.
Sincerely,
Maintenance team
Executive Summary
The month of December ran well and it was very productive. During last month, we
experienced minor break downs in mill B mainly stitching machines. Majorly, we carried out
prevent maintenance in mill B including general greasing. On motor vehicle side, we have
carried out both preventive and breakdown maintenance on few trucks majority of which had
brake systems faults, air bags and self starters’ failures, though repair of some vehicles is still
pending due to lack of spare parts.
Preventive maintenance done at Mill B
We carried out daily, weekly and monthly prevent maintenance on mill B during the last month
(December), as follows;
New V-arm
Compressor
serviced parts
dumper
UAE 896H Three MS-plates were added
on the leaf springs and one
new center bolt
Drag link
UAW 758D One oil seal, U-bolt and
dumper were installed
Dumper
U-bolt
The maintenance team includes one motor vehicle & one maintenance mechanic, one welder,
two technical helpers and turn men for motor vehicles. The one technical helper also works in
production shift changeovers as well. The team work hand in hand to deliver precise results.
The team also works hand in hand with productions team to ensure proper mill maintenance