Professional Documents
Culture Documents
TOP ACCESS
FLOOR TRAP SYSTEM
S3
LOOKS
BETTER
& FLOWS
FASTER
LUXURIOUS
GRATINGS & COLLARS
Quality without Compromise
Elegant Gratings with Trap System
Top Access
Floor trap System
Dimensions of
S3 model Top Access Floor Trap System
4” Pipe Sleeve
150mm
100mm
uPVC SWV Pipe
40mm 20mm
uPVC uPVC 79mm
115mm
SWV Pressure
pipe Pipe
51.3mm
Water Seal
85mm
4” x 3” - 82mm
Ø40
Ø20 / 40 Ø20 / 40
Ø20 / 40
S3-TIL (Locking) S3-TBIN S3-LOL4X3
www.sansico.com.my 02
*2 nos Cross Head SS Screws Included *4 nos Cross Head SS Screws Included
6” Stainless Steel Tile Tray & Collar 6” Stainless Steel Tile Tray 6” Plastic Tile Tray & Collar White
with Plastic Collar
Stainless Steel Tile Tray Stainless Steel Tile Tray Plastic Tile Tray
TSS-TT6 TSS-TT6 TP-TT6-W
Standard Plastic Collar Standard Plastic Collar Standard Plastic Collar
with SS Lining S3/SF-CP-TT-G (Grey) S3/SF-CP-TT-W
S3/SF-CPSSL-TT-G (Grey) S3/SF-CP-TT-W (White) 360˚ Aligning Collar
S3/SF-CPSSL-TT-W (White) 360˚ Aligning Collar S3/SF-ACP-TT-W
360˚ Aligning Collar S3/SF-ACP-TT-G (Grey)
S3/SF-ACPSSL-TT-G (Grey) S3/SF-ACP-TT-W (White)
S3/SF-ACPSSL-TT-W (White)
6” Plastic Tile Tray & Collar Grey 4” Stainless Steel Tile Tray & Collar 4” Plastic Tile Tray & Collar White
Plastic Tile Tray Stainless Steel Tile Tray Plastic Tile Tray
TP-TT6-G TSS-TT4 TP-TT4-W
Standard Plastic Collar Standard Plastic Collar with SS Lining Standard Plastic Collar
S3/SF-CP-TT-G S3/SF-CPSSL-TT4-G (Grey) S3/SF-CP-TT4-W
360˚ Aligning Collar S3/SF-CPSSL-TT4-W (White)
S3/SF-ACP-TT-G
4” Daisy-1 Anti-Theft
6” Venus Round-2
c/w Washing Machine Hose Opening + SS Plug
S3 Recommended slab
thickness 125mm and above.
Installation Method
It is highly recommended to use the black cap cover during installation and concreting.
Step 1: Nail the trap body to form work, connect the Step 2: Remove form work, fix outlet
drain pipes or air-cond discharge pipes if any. (with solvent cement).
Black Cap
Black Cap
Trap Body
4” x 3” Outlet
Step 3: Join bend or tee (with solvent cement) Step 4: Remove black cap (cover), join 4” uPVC pipe to
and fix uPVC pipe top of the trap body. Water proof and screed.
4” x 3” Outlet
uPVC Pipe
uPVC Elbow
Step 5: Place collar and Step 6: Place trap insert. Step 7: Place grating.
flush with tile work. Installation completed.
Schematic Layout
1.
Connection of basin & air-cond pipe
into trap body
Caution:
Discharge of air-cond pipe into floor
trap may cause condensation on the
floor trap base. Insulation is
recommended to prevent the
problem.
2.
Connection of basin below trap.
3.
Ideal solution for ground floor
applications, to allow servicing
from top.
Discharge to
inspection chamber
15 Sansico Top Access Floor Trap S3 Model
EPDM Rubber
FLOOR
Hot air resistance very good
Low temperature flexibility fair to good
Technical Data
The flow rating or capacity of a floor drain is determined by several factors:
Size of Waste-line
A horizontal branch waste-line with normal pitch or slope, with a deep seal trap at drain outlet is capable of
conveying as follows:
Summary of S3 system
S3
Model S3
Another Innovative
product from us.
With the many obvious benefits, advantages and
increasing popularity of in-slab floor traps, there is an
increasing need to have easy and uninterrupted
access to the inside of these traps for maintenance
purposes.
Installation Method
1 2 3
Install collar frame. Adjust position by using adjustable collar insert. Push the collar insert into collar frame.
www.sansico.com.my
Sansico Industries Sdn Bhd (448766-D)
No. 20, Jalan Uranus AK U5/AK,
Taman Subang Impian, Seksyen U5,
40150 Shah Alam, Selangor.