Professional Documents
Culture Documents
Learn
14 Selection circuit 1 of 3
Status LED
Circuit diagram
Switch
Button
Functional description
The learning card shows the selection circuit 1 of 3 as a circuit diagram.
Output P1 carries an H-Signal if only one switch is switched-on. If more then one switch
is switched-on, output A0.0 (P1) will carry an L-Signal.
Note:
All switches on the board of the PLC-Trainer / PLC-Rack are normally open. To realized a
contact which is normally closed, the switch has to be operated. In this way the switch
can be used as a contact which is normally closed.
Correlation list
Symbol absolute Comment
S1 I1 Switch
S2 I2 Switch
S3 I3 Switch
P1 Q1 Status LED
Exercise 1
A suggested solution (function block diagram) is shown in the solution field 1.
Exercise 2
❏ Transfer the solution “function block diagram” as a ladder diagram into solution
field 2.