Professional Documents
Culture Documents
1-Work Study Consists of
1-Work Study Consists of
(Ans: d)
a. method
b. duration of work
(Ans: c)
a. Time study
b. Motion study
(Ans: c)
(Ans: a)
5-The following factor(s) must be considered while selecting the work
for method study
a. Economic considerations
b. Technical considerations
c. Human reactions
(Ans: d)
a. Circle
b. Square
c. Arrow
d. Triangle
(Ans: d)
a. Circle
b. Square
c. Arrow
d. Triangle
(Ans: b)
(Ans: c)
9-A milk powder tin is being weighed as it is filled is an example of
(Ans: b)
(Ans: b)
(Ans: a)
i. Man type
a. only i
b. i & ii
c. ii & iii
(Ans: d)
a. repetitive operations
b. short operations
(Ans: c)
(Ans: b)
a. String diagram
(Ans: a)
a. black
b. grey
c. red
d. green
(Ans: a)
a. Search
b. Find
c. Position
d. Select
(Ans: d)
a. D
b. DE
c. DA
d. DS
(Ans: c)
a. SIMO chart
c. String diagram
(Ans: a)
20-In SIMO chart, the movements are recorded against time measured
in _____.
a. Minutes
b. Seconds
c. Micro seconds
d. Winks
(Ans: d)
b. both the hand should not remain idle except during rest period
(Ans: d)
22-The height of chair should be such that the top of work table is
________ the elbow level of the operator.
a. at same level of
b. about 30 mm below
c. about 30 mm above
d. about 50 mm above
(Ans: d)
(A) Planning
(B) Policy
(C) Procurement
(D) Processing
2-Elements of TQM includes
(C) Leadership
4-Equipment failure is
(D) OEE
(A) 50,000
(B) –45,000
(C) 90,000
(D) –90,000
6-If an activity on the critical path takes longer than anticipated, then:
(B) Documentation
(C) Drafting
(A) Use
(B) Hold
(C) Dispatch
(D) Inspection
(D) Function/Cost
19-Micromotion study is
Answers:
1-(A), 2-(D), 3-(D), 4-(A), 5-(B), 6-(C), 7-(B), 8-(A), 9-(B), 10-(C), 11-(C), 12-(C), 13-
(D), 14-(C), 15-(A), 16-(D), 17-(A), 18-(D), 19-(D), 20-(A), 21-(D), 22-(D), 23-(A)
1-In the Deming’s quality cycle, ‘P’ stands for
(A) Product
(B) Productivity
(C) Process
(D) Plan
(A) a symbol
(B) an activity
(A) Inventory
(B) Sales
(B) Sales
ANSWERS:
1-(D), 2-(A), 3-(A), 4-(C), 5-(A), 6-(A), 7-(C), 8-(A), 9-(A), 10-(C), 11-(D), 12-(C), 13-
(C), 14-(C)