Professional Documents
Culture Documents
A REPORT ON
“INPLANT TRAINING”
Insert
Colg
LOGO
HERE
AFFILIATED TO MSBTE
Submitted By
Certificate of Completion
Of Industrial Training
This is to certify that Mr. WRITE STUDENT NAME HERE with enrolment
No. 1800560116 has successfully completed Industrial Training (22049) in
COMPANY NAME HERE from 02/08/2021 to 10/09/2021 for partial fulfilment
towards completion of Diploma in Computer Engineeringfrom JSPM Rajarshi
Shahu College of Engineering(Polytechnic),Thathawade,Pune
Seal of institute
ABSTRACT
ACKNOWLEDGEMENT
At last but not the least I would like to thank everyone who has made
my training experience a pleasant and enjoyable one and helping me to
overcome the challenges I faced during training.
Students Detail :-
Group Project Name: PROJECT NAME HERE
CONTENTS
2 Introduction to Industry 8
7 Bibliography/ References 25
Their experience has taught them to provide any solution; they need creativity and lots of
inspired thinking their experienced professionals along with the ‘let-us-do-it’ attitude of the
fresh talent is constantly pushing the horizons. WRITE COMPANY NAME HERE registered
office is spread over an area of 930 Sq. Ft. and Corporate office area 390 Sq. Ft. at Model
Colony, Nasik. The industry’s year wise turnover is around 22 lac + for all software projects
they undertake, backed by comprehensive management planning and supervision.
MISSION: To design and construct the most magnificent software development and web
development services.
OBJECTIVES:
To use the industry insights and domain experience to our advantage and provide
innovative, high quality, superior cost effective solutions.
After getting registered as private limited, COMPANY NAME became premier information
technology and consultancy organization in Nasik region. COMPANY NAME creates IT and
software solutions that anticipate and effectively respond to a rapidly changing global
business environment. Focused on building long-term relationships, WRITE COMPANY
NAME HERE enables customers to capture market opportunities and consolidate their
leadership position
COMPANY NAME is a young company in Nasik which is India’s bustling metropolis city.
WRITE COMPANY NAME HERE is known as young because the company is backed by young,
energetic, curious and committed minds who are excited about solving complex business
problems, ethically. Conceived with a vision to leave behind a legacy of transformed peoples
as an organization, they place a high emphasis on working in partnership with customers.
They change to match their client’s needs as they say they very well understand the
consequences of this and they actually do this to satisfy their client’s requirements. The
professionals at WRITE COMPANY NAME HERE take the time to understand the client’s
business needs, suggest re-engineering processes and develop appropriate, cost-effective
solutions.
Their experience has taught them to provide solutions to any problem statement whether
complex or not. They need creativity and lots of inspired thinking. The professionals at the
company along with ‘let-us-do-it’ attitude of the fresh talent is constantly pushing the
horizons.
Below are some of the services provided by WRITE COMPANY NAME HERE:
Software Development
Web Development
Multimedia Solutions
SEO
Web Hosting
Domain Registration
eConnect-K12:
eConnect-K12 is an integrated and comprehensive platform for educational
institutions to manage their complete IT solutions and communication between
stakeholders. It is a software designed especially for institutions from Nasik to enable
systematic, efficient and smooth day-to-day functioning. It consists of all modules
like pre-admission, admission. CRM, attendance, fee accounting, financial
management, transport, payroll, examination, etc.
eConnect-pro:
eConnect-pro comes as a saviour for such institutes. With COMPANY NAME
eConnect-pro, many educational institutes can manage all processes like admissions,
attendance, fee management, exam management, payroll schedules, transport
WRITE COMPANY NAME HERE year wise turnover is Rs. 22 lakh + for all the software project
the company undertakes, backed by comprehensive management planning and supervision.
According to official data, the company has under its fold with skilled and experienced 8
professionals from system analysts, system designers, programmers, system integrators,
engineers, MBA’s and MCA’s to Marketing professionals, with domain expertise in their own
fields of specialization. COMPANY NAME employs the best talent in the industry. With the
objective to provide innovative software development and web development services.
3.1 HUB:
An Ethernet hub, active hub, network hub, repeater hub, multiport repeater, or
simply hub is a network hardware device for connecting multiple Ethernet devices together
and making them act as a single network segment. It has multiple input/output(I/O) ports, in
which a signal introduced at the input of any port appears at the output of every port except
the original incoming. A hub works at the physical layer (layer 1) of the OSI model. A
repeater hub also participates in collision detection, forwarding a jam signal to all ports if it
detects a collision. In addition to standard 8P8C ("RJ45") ports, some hubs may also come
with a BNC or an Attachment Unit Interface (AUI) connector to allow connection to
legacy 10BASE2 or 10BASE5 network segments.
3.2 SWITCH:
Network switch (also called switching hub, bridging hub, officially MAC bridge is a computer
networking device that connects devices on a computer network by using packet
switching to receive, process, and forward data to the destination device.
Switches for Ethernet are the most common form of network switch. The first Ethernet
switch was introduced by Kalpana in 1990. Switches also exist for other types of networks
including Fibre Channel, Asynchronous Transfer Mode, and InfiniBand.
Unlike less advanced repeater hubs, which broadcast the same data out of each of its ports
and let the devices decide what data they need, a network switch forwards data only to the
devices that need to receive it.
3.3 MODEM:
A Modem (portmanteau of modulator-demodulator) is a hardware device that converts
data into a format suitable for a transmission medium so that it can be transmitted from
computer to computer (historically over telephone wires). A modem modulates one or
more carrier wave signals to encode digital information for transmission
and demodulates signals to decode the transmitted information. The goal is to produce
a signal that can be transmitted easily and decoded to reproduce the original digital data.
Modems can be used with almost any means of transmitting analog signals from light-
emitting diodes to radio. A common type of modem is one that turns the digital data of
a computer into modulated electrical signal for transmission over telephone lines and
demodulated by another modem at the receiver side to recover the digital data.
3.4 SMPS:
A Switched-mode power supply (switching-mode power supply, switch-mode power
supply, switched power supply, SMPS, or switcher) is an electronic power supply that
incorporates a switching regulator to convert electrical power efficiently. Like other power
supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads,
such as a personal computer, while converting voltage and current characteristics. Unlike
a linear power supply, the pass transistor of a switching-mode supply continually switches
between low-dissipation, full-on and full-off states, and spends very little time in the high
dissipation transitions, which minimizes wasted energy. A hypothetical ideal switched-mode
power supply dissipates no power. Voltage regulation is achieved by varying the ratio of on-
to-off time. In contrast, a linear power supply regulates the output voltage by continually
dissipating power in the pass transistor. This higher power conversion efficiency is an
important advantage of a switched-mode power supply. Switched-mode power supplies
may also be substantially smaller and lighter than a linear supply due to the smaller
transformer size and weight.
3.5 UPS:
An uninterruptible power supply or uninterruptible power source (UPS) is an electrical
apparatus that provides emergency power to a load when the input power source or mains
power fails. A UPS differs from an auxiliary or emergency power system or standby
generator in that it will provide near-instantaneous protection from input power
interruptions, by supplying energy stored in batteries, super capacitors, or flywheels. The
on-battery run-time of most uninterruptible power sources is relatively short (only a few
minutes) but sufficient to start a standby power source or properly shut down the protected
equipment. It is a type of continual power system.
power disruption could cause injuries, fatalities, serious business disruption or data loss .
Design and Graphics:Adobe (entire Suite), Figma, Corel Draw, Flash, Prezi,StarUML
2)The AC Input to the servers, Personnel computers and the DC input to networking
equipment and grounding for the equipment will be tested for compliance with the
standards (As per the values mentioned in the P.M Report against each equipment).
3)Proper airflow to the equipment and the temperature at the node (ideal temperature
mentioned in the P.M report) will be tested and recorded. The Fan unit in the racks will be
checked for functionality and will be replaced if the same is not functional.
4) The logs of routers and access servers will be check to ensure that the e1 and e3 links are
error free. Any notification found on the log will be intimated to the Nodes in-charge and
DNW and corrective actions will also be recommended. In addition to recommendation on
corrective actions, any implementation required as a part of maintenance support will be
provided. The CPU utilization and memory utilization of routers and Access server will
tested and the same will be recorded. Show environment command will be used to record
the environment details as shown by the router, ras. RAS/ROUTERS will be checked for any
misconfigurations. Check for flapping of links will be done through log/SYSLOG and its effect
on the performance of router will be observed.
5)The health of RSP, VIP Cards, Port Adapters, and modem cards etc. will be checked. The
version of the IOS loaded in the Master flash and slave flash will be checked to ensure that
the same is in sync with the recommendation given by the data network. Removing the RSP
in slot2 of 7500 Router, the functionality of RSP in slot3 will be checked and the RSP will be
swapped after verifying the same. Upgradation if necessary will be done in consultation with
Data Networks. Note: This Process will be done only once in 2 years, not to be followed for
every P.M.
This specification defines the 5th major version, second minor revision of the core language
of the World Wide Web: the Hypertext Markup Language (HTML). In this version, new
features continue to be introduced to help Web application authors, new elements continue
to be introduced based on research into prevailing authoring practices, and special attention
continues to be given to defining clear conformance criteria for user agents in an effort to
improve interoperability.
Scope:
The scope of this specification is not to describe an entire operating system. In particular,
hardware configuration software, image manipulation tools, and applications that users
would be expected to use with high-end workstations on a daily basis are out of scope. In
terms of applications, this specification is targeted specifically at applications that would be
expected to be used by users on an occasional basis, or regularly but from disparate
locations, with low CPU requirements. Examples of such applications include online
purchasing systems, searching systems, games (especially multiplayer online games), public
telephone books or address books, communications software (e-mail clients, instant
messaging clients, discussion software), document editing software, etc.
HTML was NEVER intended to contain tags for formatting a web page!
<h1>This is a heading</h1>
<p>This is a paragraph</p>
When tags like <font>, and color attributes were added to the HTML 3.2 specification, it
started a nightmare for web developers. Development of large websites, where fonts and
color information were added to every single page, became a long and expensive process.
To solve this problem, the World Wide Web Consortium (W3C) created CSS.
3. jQuery
The purpose of jQuery is to make it much easier to use JavaScript on your website.
4. JavaScript:
JavaScript is the programming language of HTML and the Web.
COMPANY NAME, provides quality education in various fields of IT. In an age of cutthroat
competition, college education is not enough. To have an edge over your counterparts, you
need to have something extras. We have highly qualified, capable & experienced team of
faculty comprising of professionals & technical experts. Individual attention is provided to
students and equal emphasis is given to boththeory and practical.COMPANY NAME also
provide training to Diploma, Engineering, MCA’s, BTech and MTech students. COMPANY
NAME corporate training programs we emphasis ona course schedule that achieves
followingobjective for the corporate:
• Training should align with the business plan andaddress the core competencies of your
business.
• It is necessary that training outcomes strengthen thejob environment and organizational
practicesbut vice-versa is obligatory as well.
• Knowledge management and self-directed learning should be integral part of the
training/learningprocesses.
• We ensure that Training process is effective, efficientand is properly staffed, organized,
andmanaged.
• We have feedback systems to monitor business plans,performance problems and training
results.
With a corporate philosophy that considers Human Resource as the most prized assets of
the organization, it's natural for COMPANY NAME to continually hone employee skills,
enhance their knowledge and their expertise and their aspirations to fruition. Even as
COMPANY NAME goes about conducting its business activities, it lays emphasis on constant
enhancement of knowledge and skills through regular training programmes.
We were unknown of quality assurance and testing cycles held in the industry, therefore we
asked our co-ordinator to clarify our doubt.
a) High Reliability: We use the latest in software/hardware technology and have well
organized logistics structure that makes it possible to effectively harness the skills of our
developers.
b) High Support and Service: We provide service and support, we will able to offer our
customers virtually 24 hours customer support.
c) Moderate Prices: We offer effective solutions at very competitive prices. We keep our
development costs in-check, and pass over the savings to our customers.
d) Speedy project implementation: Due to our strong creative resource we can form a large
workgroup, customize and implement your project in extremely short time interval.
COMPANY NAME has a mature understanding and extensive experience designing across all
media. Our design & web development services include
1. Development Languages: C++, C#, Java, Visual Basic,
SQL and .NET Technologies.
2. Platforms: All Microsoft Windows Operating
Systems.
CHAPTER 7: REFERENCES
ADDRESSS