Professional Documents
Culture Documents
Plaxis 2D V20
Dynamic Analysis of Circular Footing
• Load : 8 kN/m2
• Project Properties :
Model : Axisymmetric
Element : 15 Node
Contour : Xmin = 0 ; Xmax = 20 ; Ymin = 0 ; Ymax = 20
I. PLAXIS INPUT
1. Soil
a. Create Borehole
b. Klik di koordinat posisi borehole (Contoh di 0,0)
c. Modify soil Layer:
• Add lapisan tanah
• Input data Material Tanah
• Drag Soil ke Modify Layer
• Tentukan muka air tanah ( MAT 0.0)
2. Structures
a. Create Plate
o Klik di koordinat 0,0 dan 1,0
o Input Material Plate (Footing)
o Set Material
3. Mesh
a. Generate Mesh
4. Flow Condition
Create Water Level : Sudah dilakukan pada saat setting soil
5. Staged Construction
o Initial Phase
o Phase 1
- Aktivate : Load & Plate
- Calculation Type : Plastic
o Phase 2
- Pada Model Explorer klik Line Load
- Pada Selection Explorer Aktifkan DynLineLoad
- qy, start, ref = -1 kN/m/m
- Multipliery = Add +
Signal : Harmonic
Amplitudo : 10
Frekuency : 10 hz
Phase : 0
- Model Condition : Dynamic
Boundary : Xmax = Viscous & Ymin = Viscous
- Calculation Type : Dynamic
- Dynamic Time Interval : 0,5s
o Phase 3
- Stop Vibration : Deactivate Dynamic Load
- Static Load still activate
- Calculation Type : Dynamic
- Dynamic Time Interval : 0,5s
o CALCULATE
Velocities
Total Stress
o Curves Manager
Tentukan Ux : 1 m
DynLineDisplacement → Multiplier x : Add
Signal : Table
Data Type : Accelerations
Tentukan Ux : 1 m
DynLineDisplacement → Multiplier x : Add
Signal : Table
Data Type : Accelerations