Professional Documents
Culture Documents
Competence, innovation, as well as market and customer orientation have formed the
successful development of the ESSER product brand for more than a quarter of a century.
We are the market leaders in fire detection technology and our qualified employees develop
and produce products and solutions for the all-encompassing safety of people and goods.
Albertina
Vienna
Fire detection systems
ponsibility
Melk Monastery
in Lower Austria
Castle Hotel
in Münchhausen
Subway
in Prague
Safety in system. There is an overall vision in our extensive And thus our IQ8Control C, IQ8Control M and 8008 fire alarm
product range: full system integration. A customized overall control panels as well as all detector series are tested and
concept of fire prevention can be planned and realized from licensed according to European Standard EN 54 regulations.
separate, individually integrable system performances for every
requirement with products optimally aligned with each other: This makes ESSER a vendor with national and international
with system solutions which enable more flexibility, economic licenses for the entire product range in fire detection techno
efficiency, and operational safety. logy. With our innovative and adaptable products and system
solutions, technically demanding and large-scale projects are
Quality: the word gets around. Performance is in international successfully implemented. At the same time we always offer
demand. International certifications and demanding reference our partners the best possible technical support and work
objects show that we have earned ourselves a world-renowned together to create the optimal system solution for every
reputation with quality products and powerful system solutions. application.
0 05
An optimally configured system makes full use of its entire potential. The use of every single
component aims not only at simply extending one’s own possibilities but also that of the
other system components. So the IQ8 fire alarm system increases its value as time goes on.
IQ8MCP
IQ8Control
IQ8Alarm
IQ8Quad
n the economical bus systems: n the IQ8Control fire alarm control panel n the IQ8MCP
esserbus-PLus or esserbus n the universal detector base for using n the innovative IQ8Wireless
n the multi-functional speech-enabled various fire detectors components
IQ8Quad detectors with alarm signal (TD, TM, O, OT, OTblue, O2T, OTG)
ing device
Thanks to this constellation, the new generation of IQ8 devices construction and its easy detector replacement additionally
is more flexible than any other fire prevention system. Its enable an uncomplicated adjustment of the fire detection unit to
detectors pick up on all known criteria and moreover possess changing environmental conditions, usage changes and object
alarm functions—also including speech alarm. The base specifications at any time.
Fire detection systems
Being perfectly aligned with each other, the 8008 and costs, whether in stand-alone operation or as a complex system
IQ8Control fire alarm control panels coordinate all system in the technologically advanced essernet. Innovative software
component activities. As practice-oriented systems, they offer documents events to the second and enables exact analysis
the highest degree of flexibility and operational safety via loop of all incoming reports. This diversified system selection opens
bus technology, modular design for future upgrades, free all possibilities of realizing a customized and reliable overall fire
configurability, multilateral functionality, and connection possi- alarm system for every object.
bilities of the latest detector technology. At the same time, they
are extremely economical due to low operational and follow-up
Modular design n n n
Fire alarm control panels for every
Free configurability n n n
purpose: advanced system solutions
esserbus-compatible with spurs n n n
in which all components are optimally
Networking of up to 31 control units n n n
aligned with each other. For effective
Conformity to standards and regulations,
national and international
n n n fire prevention with the highest degree
Display in plain text n n n of flexibility and future security.
Error diagnosis via PC, also long-distance n n n
* For large expansions, we recommend the
Easy installation and start-up n n n support of our technical sales consultants.
Fire department peripherals n n n
** One can connect up to seven ring loops and
Direct extinguishing system control via 889 detectors or esserbus terminals with the
n n n IQ8Control M. Due to German planning and
bus-driven electric control systems
installation guidelines (VdS and DIN VDE), there
Number of loops 40* 7** 2 is a limit of four ring loops and 512 detectors.
0 07
External devices
Max. 1 km Max. 1 km
IQ8Control C
essernet
IQ8Control M IQ8Control M
Max. 31 panels
Max. 1 km Max. 1 km
WINMAGplus
The essernet connects multiple control units and network Because of the modular design, all changes can be quickly and
components to one non-hierarchical network for economic and uncomplicatedly programmed from one point. Synergy and
convenient monitoring of extensively arranged building com- symbiosis – multiple fire alarm control panels communicate via
plexes. Depending on the object conditions, the essernet can be essernet and visualize their reports on one joint display and
operated using all types of cable. Up to 31 panels can communi- operating panel for integrated alarm systems.
cate in the network.
Right: As a standard
cable, the I-Y(ST)Y
communication cable is
a low-cost alternative.
essernet ranges
Distances of up to 700 m between two terminals can be bridged repeaters, the distance between the terminals can be tripled.
via a communication cable and with a data rate of 62.5 kbaud. Even distances of up to 20 km between two panels can be
With twisted-pair data cables, up to 1,000 m can be bridged: realized by using fiber-optics and corresponding converters.
and with a data rate of 500 kbaud. Through the usage of two
Fire detection systems
The esserbus-PLus is currently the most secure and economic bus. The ring bus also feeds the alarm devices directly from the
form of alarm system. It follows a simple principle: all system double-wire analog ring loop; this feed can tolerate short circuits
components are not located on various spurs as is the usual and interruptions. Additional components are not necessary. Up
case, they are exclusively and fully addressable on the ring to 48 alarm devices can be operated on one loop.
Wireless MCP
IQ8Control M
Speech
Wireless gateway
esserbus-PLus
Flash
Input
Sound
tools 8000
Cost per detector call point throughout the entire life cycle
48%
20% 20%
8% The maintenance
4% costs form the
largest cost factor of
a fire alarm system.
Planning · Consult- Manufacturing · Distri- Planning/Documen Maintenance/ Operating Costs/ Here the employment
ing · Project Plan- bution/Marketing · tation · Montage/ Service · Expansion · Damages · Operating of tools 8000 effec-
ning · Submission Service/Develop- Installation · Start-up · Change Failure/Inspection · tively saves costs
ment · Other Costs Acceptance Administration and effort.
Fire detection systems
nance
WINMAGplus
The more complex an alarm system becomes over the course of insertions in addition to dynamic graphics, tables, and visualiza-
time, the more important it is to gather all required information tions, and also on more than one operator station. Because of its
into one place. All control units events are bundled by the hazard modular design, WINMAGplus delivers on both cost-effective
management system software WINMAGplus – in a clear, concise, ness and flexibility. Necessary modules can simply be added
and user-friendly fashion. Moreover, WINMAGplus offers the user depending on the user’s application. Via its open system
the possibility to immediately initiate the proper measures with architecture and free programmability, WINMAGplus optimally
active control possibilities. In this way, the software specifically adapts to the respective local environment. Thus the system can
prevents further dangers. Furthermore WINMAGplus offers video always be both customized and economical.
FACP 3007
Repeater
Max. 1 km Max. 1 km
IQ8Control C Gateway
essernet TTY
Max. 31 devices gateway
FACP 3010
esserbus
TTY
FACP 4908
esserbus transponder
Downwards compatibility
This economical solution encompasses the connection of are used for the controlling and monitoring of external devices
older control unit series as well as WINMAGplus, the flexible or for the connection of standard, diagnostic, or special detec-
management system which is the gateway to integrating older tors with their freely programmable input and output ports.
control units, as well as the essernet repeater for the bridging Thus, ESSER fire detection systems offer decades of planning
of large distances. reliability, yet are still always state-of-the-art.
Practical example 1
It takes more than just plain reporting for systematic fire protec- damage is reliably prevented. Timer-controlled alarm signaling
tion. Therefore various control possibilities are included in the helps in emergency cases to orderly evacuate streams of people
overall IQ8 fire detection system. In case of fire, these begin with and to avoid panic. This is especially true for large building
the controlling of elevators and continues with automatic closing complexes, for example large hotels, airports, train stations,
of fire protection doors further to the active on-site application shopping centers, and sporting venues, as well as exhibition/
of an extinguishing agent. There is a wide range of controlling event halls. All of these buildings have one thing in common: the
options. All ESSER fire alarm control panels are equipped with average visitor usually possesses little or no knowledge of the
digital controlling ports. Technical alarm components, designed local layout, and is thus reliant on directed guidance for his/her
for the acquisition, forwarding, and controlling of various techni- escape during emergencies.
cal alarm reports, form an important link for many applications to
other maintenance groups in building services engineering. With esserbus-PLus, addressable alarm devices and their
various programmable audible alarms and voice messages
All-round protection in the case of emergency. Advanced active (IQ8Alarm), even complex evacuation plans can be put into
fire protection can be provided with multilateral control possibil action in a simple way.
ities. The spreading of the fire is thus prevented and greater
Fire detection systems
Practical example 2
The 8010 fire alarm and extinguishing panel is ring-bus-compat extinguishing. In this application, each extinguishing area is
ible and sets the standards for economical and flexible usage. controlled via one 8010 fire alarm and extinguishing panel. Both
With this integrated solution, simple and complex fire prevention extinguishing areas are equipped with automatic and manual
tasks are dealt with via electronic control systems for extinguish detectors in connection with an acoustic alarm device, but
ing systems at low costs. A perfect safety system: the IQ8Control together use only one extinguishing agent container.
fire alarm control panel with the esserbus (which includes the
8010 fire alarm and extinguishing panel) for direct on-site
Extinguishing area 2
Group 1
Extinguishing agent
container
esserbus
Load
cell
Max. 8 extinguishing
transponders
Group 1
Extinguishing area 1
© NEWTON21
Your specialist: