Professional Documents
Culture Documents
System Design
and Scientific Research Year: Four\ Air-conditioning &
University of Kufa Refrigeration Branch
Faculty of Engineering Time: Two Hours
Mechanical Engineering Department Examiner:Lec. Sahib Sh. Ahmed
Examination pipe design
(2020–2021)
Note: Attempt all questions
Q1- Draw the complete system with all components such as valves, fittings,
equipment and all other necessary accessories to design a piping system to supply
the chilled water for the six fan coil units as shown in figure (1). By using the attached
information in table below, two pipe system, reverse return pipe, water temperature
rise in the coil is 6.5 0C specific heat (4.19 KJ/kg.k), efficiency of the water pump
(80 %), and water pressure losses in the chiller (50 kpa) and in the cooling coil (15
kpa) also find the following:
1- The diameter of the pipe, water velocity and water pressure losses for each section
in the system.
2- Head pressure in H2O and power of pump.
4m
Second floor
4m
Shaft
First floor
4m
Ground floor
Mechanical Room
Condenser
4m
Evaporator
Pump
Chiller
Figure (1)