Professional Documents
Culture Documents
Elevated Intz Tank 279 884
Elevated Intz Tank 279 884
Modeling:
Snap Node/Beam
Select all beams and choose Create Infill Plate to Infill plate tool and fill with
PLATE ELEMENTS. (Plate member)
Circular Repeat
Select Beam Cursor and select beams and click fill plates to view the plates.
General menu- property- 200 mm for plate and provide Fixed Support to the
bottom 2 nodes as shown.
Select Hydrostatic and enter ,W1 = -40 Kn/m2 and W2 = -20 Kn/m2
Select Plate Cursor and select the plates . Use Circular Repeat as shown.
Command-
Analysis/Print .. Print Option .No Print
Add.. Plate Loads | Pressure on Full Plate …Add … Close …Assign To View
Plate | Contour
Modeling :
Snap Node/Beam
Snap Node/Beam …. (X=2, Y=20) … (X=0, Y=0)
Property … Define… Rectangle : YD = 1.0 m, ZD = 0.5 m, Material = Concrete
Insert Node
Circular Repeat
3D Rendering
View From +Z