Professional Documents
Culture Documents
SITUATION. NOV 2009 BOARD EXAM SITUATION. A rectangular reinforced concrete beam
has a width of 300 mm. The beam is reinforced with
From the given cross section of a rectangular beam
6 – 32 mm Φ bars at the bottom.
in figure.
The relevant provisions of the NSCP:
Diameter of stirrups = 10 mm
If the effective depth of the beam exceeds
Diameter of bars = 28 mm Φ
900 mm, longitudinal skin reinforcement shall be
Effective depth of beam = 710 mm uniformly distributed along both side faces of the
member for a distance d/2 nearest the flexural
Width of beam = 400 mm tension reinforcement. The area of skin
Steel reinforcement = 6 – 28 mm Φ reinforcement Ask per meter of height on each face
shall be at least equal to 1.0(d – 750). The maximum
Bars in two rows with a clearance of 24 mm spacing of the skin reinforcement shall not exceed
fy = 350 MPa, f’c = 28 MPa the lesser of d/6 and 300 mm. The total area of
longitudinal skin reinforcement in both faces need
not exceed one half of the required flexural tensile
reinforcement.
4. Compute the required effective depth (mm)
of the beam if the steel ratio is limited to
0.014.
a. 1178 b. 1245 c. 945 d. 1150
5. Compute the required area (mm2) of skin
reinforcement per meter height on each face
along both side faces of the member to
prevent flexural cracks.
a. 400 b. 230 c. 800 d. 460
6. Compute the spacing (mm) of 10 mm Φ skin
reinforcement along each face.
a. 191 b. 143 c. 207 d. 115