Professional Documents
Culture Documents
industrial lubricants
Application selector guide
Selector guide
2
High-performance industrial lubricants
Maintenance
Temperature
Application Substrates Other considerations MOLYKOTE® brand solution
range (°C)
Assembly of
Metal to
threaded -30 to +650 General purpose MOLYKOTE® 1000 Paste
metal
connections
MOLYKOTE® P-1900 FM Anti-Seize
-30 to +300 White/food grade
Paste
Consistent assembly
MOLYKOTE® 1000 Paste
torque
No corroding/extreme
Aluminum or
-40 to +1400 temperature/sulfur and MOLYKOTE® P-37 Anti-Seize Paste
stainless steel
metal-free
Metal to Very low coefficient of
Press fitting -35 to +450 MOLYKOTE® G-Rapid Plus Paste
metal friction
Medium coefficient of
-25 to +450 MOLYKOTE® G-n Plus Paste
friction
-25 to +250 White product MOLYKOTE® D Paste
MOLYKOTE® P-1900 FM Anti-Seize
-30 to +300 White/food grade
Paste
Metal to MOLYKOTE® Multigliss, MOLYKOTE®
Disassembly -50 to +50 Loosen rusted parts
metal Supergliss
Corrosion Metal to
-30 to +300 Corrosive environment MOLYKOTE® Cu-7439
Plus Paste
protection metal
Storage: Corrosion Metal to
Long stocking intervals MOLYKOTE® Metal Protector Plus
protection metal
MOLYKOTE® A Solid Lubricant
Oiled machine Metal to Depends on oil to
High loads Dispersion, MOLYKOTE® M-55
components metal which it is added
Dispersion
Sticking of Metal to
MOLYKOTE® Separator Silicone
rubber, metal and plastic to -40 to +200 Silicone release agent
Spray
plastic parts rubber
3
High-performance industrial lubricants
Chain drives
Temperature
Application Substrates Other considerations MOLYKOTE® brand solution
range (°C)
Water washout resistant/ MOLYKOTE® 1122 Chain and Open
Greased chains Metal to metal +10 to +160 high speeds Gear Grease
High speeds/good MOLYKOTE® MKL-N Chain Grease
-25 to +150 penetration Spray
Tacky paste/wide
-40 to +230 temperature range/ MOLYKOTE® P-40 Paste
water-resistant
MOLYKOTE® D-321 R Anti-Friction
-180 to +450 Long-term lubrication Coating
High-temperature chains/ MOLYKOTE® M-30 Solid Lubricant
Oiled chains Metal to metal MoS2 content Dispersion
Extreme loads/high MoS2
content MOLYKOTE® M-55 Plus Dispersion
Threaded connections
Temperature
Application Substrates Other considerations MOLYKOTE® brand solution
range (°C)
High temperature/no
Pre-assembly Metal to metal -30 to +650 scattering of assembly MOLYKOTE® 1000 Paste
torque
High temperature/general
-30 to +1100 purposes/contains no lead MOLYKOTE® HSC Plus Paste
or nickel
-25 to +250 White product MOLYKOTE® D Paste
MOLYKOTE® P-1900 FM Anti-Seize
-30 to +300 White/food grade Paste
Very high temperature/
compatible with a wide
-40 to +1500 MOLYKOTE® P-74 Paste
range of high temperature
steels
No corroding/extreme
Aluminum or -40 to +1400 temperature/sulfur and MOLYKOTE® P-37 Anti-Seize Paste
stainless steel metal-free
Disassembly Metal to metal Loosen rusted parts MOLYKOTE® Multigliss
Metal Corrosion protection/
Storage protection MOLYKOTE® Metal Protector Plus
components dry film
4
High-performance industrial lubricants
Control cables
Temperature
Application Substrates Other considerations MOLYKOTE® brand solution
range (°C)
General purpose
Operation -40 to +130 MOLYKOTE® PG-75 Plastislip Grease
semi-synthetic
MOLYKOTE® 33 Light Extreme Low
Wide temperature
-73 to +180 Temperature Grease, MOLYKOTE® 33
range/low friction
Medium Extreme Low Temperature Grease
Metal wire/
Dusty environments/
cable to metal -180 to +450 MOLYKOTE® D-321 R Anti-Friction Coating
low friction
liner
Multipurpose synthetic/ MOLYKOTE® G-4500 FM Multi-Purpose
-40 to +150
food grade Synthetic Grease
Storage Metal Corrosion protection/
MOLYKOTE® Metal Protector Plus
protection components dry film
5
High-performance industrial lubricants
6
High-performance industrial lubricants
Gears
Temperature
Application Substrates Other considerations MOLYKOTE® brand solution
range (°C)
Pretreatment Metal to metal -25 to +450 Run-in lubricant MOLYKOTE® G-Rapid Plus Paste
7
High-performance industrial lubricants
8
High-performance industrial lubricants
Pastes
MOLYKOTE® brand solution
Greaselike materials containing MOLYKOTE® 1000 Paste MOLYKOTE® G-Rapid Plus Paste MOLYKOTE® P-74 Paste
a very high percentage of solid MOLYKOTE® Cu-7439 Plus Paste MOLYKOTE HSC Plus Paste
®
MOLYKOTE® P-1600 Paste
lubricants. Used for assembly MOLYKOTE D Paste
®
MOLYKOTE HTP Paste
®
MOLYKOTE® P-1900 FM
and lubrication of highly loaded, Anti-Seize Paste
MOLYKOTE® DX Paste MOLYKOTE® M-77 Grease
slow-moving parts for threaded MOLYKOTE® TP-42 Paste
MOLYKOTE E Paste
® MOLYKOTE® P-37 Grease
fasteners. MOLYKOTE® U-n Paste
MOLYKOTE® G-n Plus Paste MOLYKOTE® P-40 Grease
MOLYKOTE® X Grease Paste
Greases
MOLYKOTE® brand solution
Solid to semisolid materials MOLYKOTE® 41 Grease MOLYKOTE® EM-30L Grease MOLYKOTE® G-4500 FM Multi-
consisting of a lubricating Purpose Synthetic Grease
MOLYKOTE® 33 Light Extreme MOLYKOTE® EM-50L Grease
fluid, thickening agent and Low Temperature Grease MOLYKOTE® G-4501 FM Multi-
additives. Used on rolling MOLYKOTE® EM-60L Grease Purpose Synthetic Grease
MOLYKOTE® 33 Medium
element bearings and other Extreme Low Temperature MOLYKOTE® FB 180 Grease MOLYKOTE® G-4700 Extreme
moving parts. Grease Pressure Synthetic Grease
MOLYKOTE G-67 Grease
®
9
High-performance industrial lubricants
Compounds
MOLYKOTE® brand solution
Greaselike materials composed MOLYKOTE® 111 Compound
of silicone fluids and silica fillers. MOLYKOTE® 4 Electrical Insulating Compound
Used for their sealing, dielectric,
non-metal-to-metal lubricating
and release properties.
Coatings
MOLYKOTE® brand solution
“Lubricating paints”; when MOLYKOTE® 106 MOLYKOTE® 7409 MOLYKOTE® D-96
applied, these materials cure to Anti-Friction Coating Anti-Friction Coating Anti-Friction Coating
form dry, solid lubricant MOLYKOTE® 3400A MOLYKOTE® D-10 MOLYKOTE® L-0500
Anti-Friction Coating LF Anti-Friction Coating Coating Spray
coatings that are bonded to
the surface. MOLYKOTE® 3402C MOLYKOTE® D-321 R MOLYKOTE® Metal
Anti-Friction Coating LF Anti-Friction Coating Protector Plus
MOLYKOTE® 7400 MOLYKOTE® D-3484 MOLYKOTE® PTFE-N
Anti-Friction Coating Anti-Friction Coating UV Spray
MOLYKOTE® D-7405 MOLYKOTE® D-708 MOLYKOTE® S-1010
Anti-Friction Coating Anti-Friction Coating Anti-Spatter Spray
Dispersions
MOLYKOTE® brand solution
Finely divided solid lubricants MOLYKOTE® A Dispersion MOLYKOTE® MKL-N Grease
suspended in lubricating fluids; MOLYKOTE HTF Solid Lubricant Dipersion
®
MOLYKOTE® Multigliss Spray
preferred when it is necessary MOLYKOTE® M-30 Dispersion MOLYKOTE® Omnigliss Spray
to apply solid lubricants in
MOLYKOTE M-55 Plus Dispersion
®
liquid form.
* For more information on the product and service offering in your area, please contact your sales representative or one of our offices.
10
11
How to contact us
For more than 70 years, OEM designers, maintenance and materials engineers around the world have
trusted the MOLYKOTE® brand for performance and expertise to solve or prevent lubrication problems.
MOLYKOTE® solutions are available through a distributor network of more than 3,000 channel partners
around the globe. To learn more about our extensive product and service offering, visit molykote.com.
DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with ™, SM or ® are trademarks, service marks or registered trademarks of affiliates
of DuPont de Nemours, Inc.
© 2019 DuPont de Nemours, Inc. All rights reserved.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal range of
properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish specification limits nor
used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy themselves that their particular
conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our control, we make no warranties, express or
implied, and assume no liability in connection with any use of this information. As with any product, evaluation under end use conditions prior to specification is
essential. Nothing herein is to be taken as a license to operate or a recommendation to infringe on patents. (5/19) AGP16034