Professional Documents
Culture Documents
Spreadsheets To EC2: Post-Tensioned Analysis & Design To Bs en 1992-1:2004 - Genera
Spreadsheets To EC2: Post-Tensioned Analysis & Design To Bs en 1992-1:2004 - Genera
OPTIONS Exposure class is X0, XC1 stress system is bonded d stressed from left end
Slab Wmax, mm = 0.2
Jacking force /fpk = 0.8 bonded rebar in spans? Yes (Helps to reduce deflections - recommended)
Slab type R (S)olid, (R)ibbed or (W)affle, supported by beam
Damping, z (1% to 4½%) 1.5%
NOTES on MATERIALS
BRITISH LOW RELAXATION STRAND
Type Dia Area fpk Weight RELAXATION at 0.7fpk
Standard 15.2 139 1670 1.090 Ambient ºC 20 40 60 80 100
12.5 93 1770 0.730 Relaxation 1.8 3.5 5.1 7.5 10.7
Super 15.7 150 1770 1.180
12.9 100 1860 0.785
Compact 15.2 165 1820 1.295
12.7 112 1860 0.890
Project Spreadsheets to EC2 The Concrete Centre
Client Advisory Group Made by Date Page
Location Level 2 - Beam on Grid 7 rmw 15-Nov-2021 260
POST-TENSIONED ANALYSIS & DESIGN to BS EN 1992-1:2004 Checked Revision Job No
Originated from TCC42.xls v4.0 on CD © 2005-21 T chg - FB625
Dimensions and Loads
NORMAL DIRECTION
SPANS Lm H mm bw mm hf mm Section beff mm No Bays Bay width m
Span 1 16.000 800 350 150 T 1200 10 7.200
Span 2 14.400 800 350 150 T 1200 10 7.200
Span 3 13.800 800 350 150 T 1200 10 7.200
CONFIGURATION SLAB supporting Ribbed Slab, Exposure class X0, XC1, Wk = 0.2 mm, fck = 40,
Stressed from Both Ends
TENDON PROFILE (heights to strand centre: see heights specified under TENDONS below)
826
501 501
41 80
80
60 5 2 kN/m
52 kN/m 52 kN/m
38 kN/m
40 31 kN/m
23 kN/m
20
0 -11 kN/m -13 kN/m -7 kN/m
-20
-40
Project Spreadsheets to EC2 The Concrete Centre
Client Advisory Group Made by Date Page
Location Level 2 - Beam on Grid 7 rmw 15-Nov-2021 261
POST-TENSIONED ANALYSIS & DESIGN to BS EN 1992-1:2004 Checked Revision Job No
Originated from TCC42.xls v4.0 on CD © 2005-21 T chg - FB625
Tendons & bonded reinforcement
(a) TENDONS Pj = 149 kN Pi/A = 1.52 MPa max
Supt 1 Span 1 Supt 2 Span 2 Supt 3 Span 3 Supt 4
Pi/Pj 71.7% 53.7% 43.0%
P30/Pj 70.6% 52.6% 42.1%
Pf/Pj 63.3% 46.0% 35.6%
No of strands
Recommended ≥5 ≥5 ≥5 ≥3 ≥3 ≥3 ≥3 ≥3 ≥3
Use 5 5 5 5 5 5 4 4 4
Recommend'd height 501 41 759 41 759 41 501
Height mm 501 41 826 826 41 826 826 41 501
Length Straight mm 0 0 0 0 0 0
x to max Sag mm 7056 7200 7714
Pi kN 618 618 534 515 454 400 320 282 256
Balance Load kN 80.6 108.5 99.1 99.1 57.4 42.7
Pf kN 550 553 471 453 396 342 274 238 212
Balance Load kN 61.4 82.7 74.6 74.6 43.1 32.0
1000
500
-500
-1000
-1500
Project Spreadsheets to EC2 The Concrete Centre
Client Advisory Group Made by Date Page
Location Level 2 - Beam on Grid 7 rmw 15-Nov-2021 263
POST-TENSIONED ANALYSIS & DESIGN to BS EN 1992-1:2004 Checked Revision Job No
Originated from TCC42.xls v4.0 on CD © 2005-21 T chg - FB625
Results (2)
(e) SHEAR Link Ø = 8
Span 1 Span 2 Span 3
Left Right Left Right Left Right
VEd - Vtd 170.3 217.7 160.1 168.9 194.2 159.1
cracked ? N Y Y Y Y N
(VEd - Vtd)/VRdc 0.856 1.138 0.845 0.945 1.129 0.959
No of legs 3 3 3 3 3 3
Link spacing 425 425 425 425 425 425
(g) DEFLECTION
TYPICAL CALCULATION
for Span 1 at 4.80 m from C/L of LH support EC2 Ref
Class X0, XC1 Tee section, h = 800 mm, bw = 350 mm hf = 150 mm, bf =1 Table 4.1
Ac = 407500mm², Z top = 81.9E6 mm³, and Z bottom = 48.7E6 mm³
Tendons are bonded, Ap = 100mm², fpk = 1,860 N/mm2 and 101.8 mm from soffite
There are 5 tendons, jacked to 1,488 N/mm² or 80% fpk
Prestress losses at this section are 126.1 kN at transfer and 192.2 kN longterm 5.10.5 & 6
SPAN 2
SPAN 3
123.97 172.95 61.42 -11.26 134.85 132.38 74.61 -12.95 149.05 107.04 43.11 -6.81
129.06 167.86 61.42 -11.26 90.08 86.43 74.61 -12.95 142.53 113.56 43.11 -6.81
81.41 114.71 61.42 -11.26 130.68 136.55 74.61 -12.95 100.84 68.31 43.11 -6.81
118.16 164.36 61.42 -11.26 127.98 126.28 74.61 -12.95 141.63 102.04 43.11 -6.81
122.70 159.82 61.42 -11.26 89.63 86.88 74.61 -12.95 135.81 107.86 43.11 -6.81
81.95 114.17 61.42 -11.26 124.27 130.00 74.61 -12.95 100.14 69.02 43.11 -6.81
194.57 266.33 61.42 -11.26 211.79 203.03 74.61 -12.95 229.69 167.84 43.11 -6.81
194.70 266.20 61.42 -11.26 118.10 102.32 74.61 -12.95 225.87 171.66 43.11 -6.81
91.58 153.32 61.42 -11.26 206.86 207.96 74.61 -12.95 135.88 75.35 43.11 -6.81
TypiCalc!
SPAN 1 0.8 Btm 0 0 0 0 0 0 0 20 0 20 0 20 0 20 0
X 0 0 0 0 0.8 1.6 1.6 2.4 3.2 4 4.80 5.6 6.4 7.2 8 8.8 9.6 10.4 11.2 12 12.8 13.6 14.4 14.4 15.2 16 16 0 16 7.200 7.200 6.400 6.400 6.400
profile X 0 0.8 1.6 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 8.8 9.6 10.4 11.2 12 12.8 13.6 14.4 14.4 15.2 16 16 7.200 7.200 6.400 6.400 6.400
PROFILE 501.0 501.0 501.0 501.0 474.9 396.7 396.7 300.0 218.7 152.6 101.8 66.3 46.1 41.2 51.7 77.4 118.4 174.7 246.2 333.1 435.3 552.8 685.6 685.6 790.9 826.0 826.0 41.2 41.2 46.1 46.1 46.1
BALANCE 0.00 0.00 0.00 38.39 38.39 38.39 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 -11.26 51.68 51.68 51.68 0.00
Beam 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 days 0 0 0 0 -49.486 -63.724 -63.724 -60.434 -57.335 -54.428 -51.7137 -49.191 -46.86 -44.72 -42.773 -41.017 -39.454 -38.082 -36.902 -35.913 -35.117 -34.512 -34.1 -34.1 -8.1698 68.9862 0.00 56.00
M-SLS 1 0 0 0 0 -37.679 -36.613 -36.613 -17.639 -1.5958 11.5163 21.6976 28.948 33.2675 34.6562 33.114 28.641 21.2371 10.9023 -2.3633 -18.56 -37.687 -59.745 -84.734 -84.734 -86.238 -37.841 34.6562 7.2 0.00 -37.84 34.6562
M-SLS 2 0 0 0 0 -94.029 -149.89 -149.89 -183.46 -210.63 -231.4 -245.769 -253.74 -255.31 -250.49 -239.26 -221.63 -197.6 -167.18 -130.35 -87.124 -37.498 18.5277 80.953 80.953 169.917 305.558 0.00 305.56 -250.49
M-SLS 3 0 0 0 0 -99.416 -160.66 -160.66 -199.62 -232.17 -258.33 -278.087 -291.44 -298.4 -298.96 -293.12 -280.88 -262.24 -237.2 -205.76 -167.92 -123.68 -73.038 -15.999 -15.999 67.5783 197.834 -298.96 7.2 0.00 197.83 -298.96
M-SLS 4 0 0 0 0 -47.606 -62.798 -62.798 -61.465 -59.492 -56.879 -53.6268 -49.735 -45.203 -40.031 -34.22 -27.769 -20.678 -12.947 -4.5771 4.43285 14.0825 24.3719 35.301 35.301 67.0087 139.634 0.00 139.63 -40.031
M-SLS 5 0 0 0 0 -80.951 -125.46 -125.46 -149.4 -168.68 -183.28 -193.217 -198.48 -199.07 -194.98 -186.23 -172.8 -154.71 -131.94 -104.49 -72.382 -35.597 5.85948 51.9876 51.9876 122.926 238.815 0.00 238.81 -199.07
M-SLS 6 0 0 0 0 -85.023 -133.6 -133.6 -161.62 -184.97 -203.65 -217.652 -226.98 -231.65 -231.64 -226.95 -217.6 -203.58 -184.88 -161.51 -133.47 -100.76 -63.373 -21.318 -21.318 45.5484 157.364 -231.65 6.4 0.00 157.36 -231.65
M-SLS 7 0 0 0 0 -48.919 -65.426 -65.426 -65.406 -64.747 -63.448 -61.5091 -58.931 -55.712 -51.854 -47.357 -42.219 -36.442 -30.026 -22.969 -15.273 -6.937 2.03866 11.654 11.654 42.0481 113.36 0.00 113.36 -55.712
M-SLS 8 0 0 0 0 -76.591 -117.31 -117.31 -138.05 -154.7 -167.25 -175.699 -180.06 -180.32 -176.48 -168.55 -156.53 -140.41 -120.19 -95.876 -67.468 -34.963 1.63675 42.3325 42.3325 107.263 216.567 0.00 216.57 -180.32
M-SLS 9 0 0 0 0 -80.226 -124.58 -124.58 -148.96 -169.24 -185.42 -197.507 -205.5 -209.39 -209.19 -204.9 -196.51 -184.02 -167.44 -146.76 -121.99 -93.117 -60.152 -23.091 -23.091 38.2051 143.874 -209.39 6.4 0.00 143.87 -209.39
M-SLS 10 0 0 0 0 -49.357 -66.302 -66.302 -66.72 -66.499 -65.637 -64.1365 -61.996 -59.216 -55.796 -51.736 -47.036 -41.697 -35.718 -29.1 -21.842 -13.943 -5.4057 3.77173 3.77173 33.7278 104.602 0.00 104.60 -59.216
M-ULS 1 0 0 0 0 -134.16 -225.31 -225.31 -289.35 -342.15 -383.72 -414.067 -433.18 -441.06 -437.71 -423.13 -397.31 -360.27 -311.99 -252.49 -181.75 -99.781 -6.5809 97.85 97.85 233.651 420.961 0.00 420.96 -441.06
M-ULS 2 0 0 0 0 -134.26 -225.52 -225.52 -289.66 -342.57 -384.25 -414.694 -433.91 -441.89 -438.65 -424.17 -398.46 -361.52 -313.35 -253.95 -183.32 -101.45 -8.3573 95.969 95.969 231.665 418.871 -441.89 6.4 0.00 418.87 -441.89
M-ULS 3 0 0 0 0 -56.086 -77.807 -77.807 -81.051 -81.704 -79.765 -75.236 -68.116 -58.404 -46.101 -31.207 -13.722 6.35382 29.021 54.2793 82.1288 112.569 145.601 181.224 181.224 239.576 340.798 0.00 340.80 -58.404
Pi 617.9 617.9 617.9 617.9 617.9 617.9 617.9 617.9 617.9 617.9 616.5 609.0 601.5 594.0 586.4 578.9 571.4 563.9 556.4 548.8 548.8 541.3 533.8 616.5 616.5 617.9 617.9 617.9
Pf 549.5 549.9 550.3 550.3 550.6 551.0 551.4 551.8 552.1 552.5 551.5 544.2 536.9 529.5 522.2 514.9 507.6 500.3 492.9 485.6 485.6 478.3 471.0 551.5 551.5 552.5 552.5 552.5
C top @ trans 0 1.516 1.516 1.516 1.976 1.963 1.963 1.732 1.536 1.376 1.251 1.163 1.110 1.090 1.090 1.126 1.198 1.306 1.450 1.629 1.844 2.095 2.382 2.382 2.382 1.772 1.090
C btm @ trans 0 1.516 1.516 1.516 0.742 0.764 0.764 1.154 1.483 1.753 1.962 2.111 2.200 2.225 2.175 2.064 1.894 1.663 1.372 1.021 0.610 0.138 0.000 0.000 0.000 0.533 2.225
T top @ trans 0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
T btm @ trans 0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.574 1.574 1.771 0.000 0.000
C top, final 0 1.349 1.349 1.349 2.329 2.872 2.872 3.170 3.419 3.618 3.766 3.865 3.913 3.908 3.838 3.717 3.547 3.326 3.056 2.735 2.365 1.944 1.474 1.474 0.762 0.000 1.353 1.356 3.913 1.356
C btm, final 0 1.349 1.349 1.349 0.336 0.000 0.000 0.000 0.000 0.005 0.037 0.082 0.140 0.207 0.273 0.351 0.443 0.548 0.666 0.797 0.941 1.243 2.061 2.061 3.377 5.604 1.353 1.356 0.140 1.356
T top, final 0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.310 7.044 0.000 0.000 0.000 0.000
T btm, final 0 0.000 0.000 0.000 1.587 5.575 5.575 7.873 9.788 11.318 12.465 13.228 13.608 13.617 13.304 12.608 11.527 10.063 8.215 5.983 3.367 0.368 0.000 0.000 0.000 0.000 0.000 13.608 0.000 0.000
C top, ULS 0 1.483 1.483 1.483 3.124 4.240 4.240 5.024 5.671 6.181 6.554 6.790 6.888 6.846 6.649 6.316 5.845 5.237 4.491 3.609 2.589 1.433 0.139 0.139 0.000 0.000 6.753
C btm, ULS 0 1.483 1.483 1.483 0.332 0.000 0.000 0.000 0.000 0.000 0.000 0.091 0.292 0.542 0.828 1.167 1.560 2.006 2.505 3.057 3.662 4.321 5.033 5.033 6.212 9.917 0.156
T top, ULS 0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.080 2.758 4.563 4.563 7.478 16.404 0.000
T btm, ULS 0 0.000 0.000 0.000 6.173 13.667 13.667 18.933 23.276 26.697 29.195 30.771 31.423 31.166 30.041 27.993 25.023 21.130 16.315 10.577 3.916 0.000 0.000 0.000 0.000 0.000 7.720
National Annex values - BS EN 1992-1
EC2 Ref Function Value National Annex values - BS EN 1990
2.4.2.2 (1) γp,fav 0.9 TABLE A1.1 ψ0 ψ1 ψ2
2.4.2.2 (2) γp,unfav 1.1 A 0.7 0.5 0.3
Table 2.1 γc 1.5 concrete B 0.7 0.5 0.3
Table 2.1 γs 1.15 steel C 0.7 0.7 0.6
3.1.6 (1)P αcc 0.85 strength factor (flexure) D 0.7 0.7 0.6
3.1.6 (1)P αcc 1.00 strength factor (shear) E 1 0.9 0.8 1
3.1.6 (2)P αct 1.00 -=- F 0.7 0.7 0.6
3.3.4 (5) K 1.1 fpk /fp0.1k G 0.7 0.5 0.3
5.1.2 (1)PPattern loading b alternate & all spans H 0.5 0.2 0
5.5(4) k1 0.4 redistribution factor J 0 0 0 1
-=- k2 a 1 a(b+c/εcu2)
-=- k2 b 0.6 -=- γG,sup 1.35 dead load factor
-=- k2 c 0.0014 -=- γG,inf 1 dead load factor
-=- k3 0.4 redistribution factor γQ 1.5 imposed load factor
-=- k4 a 1 a(b+c/εcu2) Allow 6.10a & b? Yes loading equations
-=- k4 b 0.6 -=- ξ 0.925Gk modification factor
-=- k4 c 0.0014 -=-
-=- k5 0.7 redistribution factor
-=- k6 0.8 redistribution factor
5.10.2.1 K1 0.8 σp,max
-=- K2 0.9 σp,max
5.10.8 (2) Δσp,ULS 100 prestress reduction at ULS
6.2.2 (1) CRd,c 0.18 basic shear stress 0.12
-=- vmin 0.035 x k3/2fck1/2
-=- k1 0.15 prestress factor
6.2.3(2) cotØmin/max 1 ←max/min strut angle→2.5
6.2.3(3) αcw 1 for VRdmax
7.2(5) k3 1 max steel stress
9.2.2(6) St,max 0.75 xd
12.6.3 (2) k 1.5 torsional factor
Span 1 2 3
Gk 196.1 176.5 169.2
Qk 144.0 129.6 124.2
6.10a 416.0 374.4 358.8 1149.095 Dead 1.24875 b
6.10b 460.9 414.8 397.5 1273.25 Imposed 1.5 a
Checks 0 0 0 0
BS EN 1990: (6.10b)
.
Disclaimer
All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the
significance and limitations of its contents and take responsibility for its use and application. No liability
(including that for negligence) for any loss resulting from such advice or information is accepted by
MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-
The Concrete Centre software and publications are subject to revision from time to time and they
should therefore ensure that they are in possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC
Spreadsheets: v4' available from The Concrete Centre www.concretecentre.com/rcdesign Tel +44
(0)1276 606800
Status of spreadsheet This spreadsheet is shareware but may not be used for commercial purposes until
the user has registered with The Concrete Centre using the licence validation form
Public release version available on The Concrete Centre website www.concretecentre.com/rcdesign