Professional Documents
Culture Documents
FUNCTIONAL COMPONENTS
The back pack consists of an anatomic plate made of self
extinguishing synthetic resin, light and robust thanks to the fibre
glass reinforcement. The carefully designed shape al- lows to fit all
the below listed cylinders which are firmly locked by a quick action
buckle. Two practical handles are present on both sides to allow
both for easy transportation and to shelter the medium and high
pressure hoses inside. The pressure reducer is locked as to make
easy and fast the connection of the cylinder. It is also designed to
download the weight of the cylinder along the strain lines without
im- posing unnecessary stress on the pneumatic components of
the pressure reducer. On the lower part of the back pack, a rubber
edge protects the complete apparatus and particularly the cylinder
valve. - The body harness is a composite structure made of self
extinguishing textile. The buckles are made both in metal and
synthetic resin for an optimal balance between robustness, flame
resistance and ease of adjustment. The padded shoulder webbings
host internally the high and medium pressure hoses thus
protecting them from heat flames and abrasion.
via di Cervara nº42, 00155 Roma telefax 06.22.90.351 - P. IVA 04476541000 - E-mail: dpi@dpisekur.com
SELF CONTAINED BREATHING APPARATUS (SCBA)
DIABLO ADVANCED TYPE2
The compensated C2000 pressure reducer (patented) uses an
active compensation principle exploiting the closing trust of the
main valve which has been tested on over hundred thousand
pieces produced.
Medium pressure hoses are hold in place by “U” shaped pins which
allow for easy maintenance and free pivoting of the hoses during
use. The pressure reducer is also equipped with an auxiliary
warning device placed on the medium pressure safety valve which
warns about malfunctions if any.
- The pressure gauge, placed on the left side of the user and
hooked to the shoulder webbing, is extremely thin, of innovative
design and extra light, though effectively protected by a rubber
shell.
Such shell is internally grooved in order to maintain the mechanic
protection without external complex shape which could give rise to
ignition or retain dirt and contamination.
via di Cervara nº42, 00155 Roma telefax 06.22.90.351 - P. IVA 04476541000 - E-mail: dpi@dpisekur.com
SELF CONTAINED BREATHING APPARATUS (SCBA)
DIABLO ADVANCED TYPE2
- The warning whistle is of the dual stage type, i.e. it is driver by
the high pressure but actuated by medium pressure. In addition it
is equipped with the patented auto test feature which allows the
automatic testing of correct setting and operation. Usually, the
check of the correct operation and setting of the warning device is
a long and complex operation.
DIABLO is sufficient just to open the cylinder valve and the test is
performed automatically: a few seconds delay imposed to the first
pressurization of the circuits and of the pressure gauge makes it
easy to follow on the dial the rise of the needle. The pressure
gauge will be efficient and correctly set if the whistle will be clear
and loud as long as the needle is within the red sector of the dial
and stops immediately after.
- E400 lung governed demand valve is of the first breath type
i.e. it automatically switches from the stand by mode (with- out
any waist of air). It is able to deliver in positive pressure up a
respiratory demand in excess of 10 times the average air
consumption needed during normal use and is characterized by
fast response and smooth action.
The energy required for breathing is given by the surface of the
breathing cycle, which in the case of DIABLO is extremely small:
the less this area is, the less the breathing strain results. The
diagrams of the breathing cycles of DIABLO also show, besides the
limited energy required, also the regularity of the shape by varying
the high pressure supply value. The optimal compensation of the
pressure reducer and the perfect match with the demand valve
allows this outstanding performance.
via di Cervara nº42, 00155 Roma telefax 06.22.90.351 - P. IVA 04476541000 - E-mail: dpi@dpisekur.com
SELF CONTAINED BREATHING APPARATUS (SCBA)
DIABLO ADVANCED TYPE2
- C607 SP/A or SFERA SP/A positive pressure full face masks
available in EPDM or SILICONE versions, with standard thread or
plug in connector.
MAIN COMPONENTS
- Synthetic rubber face piece with wide internal seal for tight fit and
adjustable fasteners for the attachment of the harness (patented).
- Panoramic and distortion free visor made of poly-metacrilate, with
fiberglass reinforced synthetic resin frame, easily replaceable.
- Inner mask with non return valves.
- Complies with European EN 136:1998 for positive pressure
version.
- Threaded connector conforming to European EN 148/1 standard,
positioned centrally below the speech diaphragm.
- SFERA SP/A also complies with European EN 148/3 for the SP/A
overpressure version, in addition to the above standards.
- Two exhalation valves with compensating pre-chambers.
- Five straps elastic harness made of rubber, with quick release
buckles, neck strap for suspending when not in use.
MAIN FEATURES
- Materials used are not likely to cause allergies or irritations to the
wearer's skin.
- Good adaptability to most faces.
- Leakage less than 0.05% corresponding to a protection factor of
over 2000.
- Wide field of vision, in excess of 72%, (85%) for SFERA of the
natural field of vision and beyond 93% of the overlapped field of
vision.
- Excellent demisting system.
- Breathing resistance (1.8 mbar during inhalation and 2.0 mbar
during exhalation at a flow rate of 160 l/min) well below standard
approval maximum limits.
- Reduced dead space (less than 50% of maximum allowed).
- Excellent voice transmission thanks to the frontal position of the
speech diaphragm, which allows utilization of a telephone, walky-
talky and public address device
- Good flame and radiant heat resistance: the mask is self
extinguishing and maintains full protective capacity even after very
severe test (approved according to DIN 58646/10).
- Standard visor made of high impact resistance polycarbonate
resistant to acids, even at high concentration;
- Quick and easy to don and doff. Neck harness allows comfortable
ready for use carrying of the mask.
- Long storage durability, high resistance to ozone. Main components
made from synthetic resin suitable for exposure to both low and
high temperatures and unaffected by humidity.
- Easy to maintain, clean and sanitize. All components can be
disassembled without special tools.
- Compatible with the use of safety helmets.
via di Cervara nº42, 00155 Roma telefax 06.22.90.351 - P. IVA 04476541000 - E-mail: dpi@dpisekur.com
SELF CONTAINED BREATHING APPARATUS (SCBA)
DIABLO ADVANCED TYPE2
Cascade Configurations
DIABLO ADVANCED is also available in three additional
configurations, which allow the connection to a second outlet
(OUT), or to an external air line system (IN), or both (IN & OUT).
Namely:
1. OUT configuration for the connection to a second outlet is
achieved by a “T” connection which derives the medium pressure
and ends with a quick coupling valve placed on the belt.
2. IN configuration for the connection to an external com- pressed
air source. In this case the “T” connector which derives the
medium pressure ends with a male connector, placed on the belt,
equipped with a check valve to prevent air loss when disconnected.
3. IN & OUT configuration consists of a medium pressure hose
ending with a “T” connector equipped with a male coupling, fitted
with a check valve, for the connection to an external compressed
air source or large size cylinder(s) in addition to a quick coupling
valve for the connection to a second outlet.
- The cylinder valve can be fitted with an auxiliary pressure
gauge, constantly pressurized which informs at all times about the
filling status of cylinder. A loose ring on the handle prevents the
risk of accidental shut off due to friction on walls or other surfaces.
- On demand, the cylinder valve is also available in the Push and
Turn version which makes impossible both opening and shutting in
use and during handling or transportation of the cylinder.
CYLINDERS
The cylinders comply with the regulations in force in the countries where they are marketed and are accompanied
by an inspection report stating that they have successfully passed the required testing.
All the cylinder identification data are printed on the cylinder cap according to law. The cylinders are equipped with
A.P. valve made of hot-pressed brass externally chromium-plated, with threading conforming to the national
regulations and a control wheel soft and specially designed in order to ensure a firm grip. The breathing apparatus
DIABLO is CE certified also to be used with a composite cylinder
via di Cervara nº42, 00155 Roma telefax 06.22.90.351 - P. IVA 04476541000 - E-mail: dpi@dpisekur.com