Professional Documents
Culture Documents
用
户
手
册
User Manual
广东瑞洲科技有限公司
GUANGDONG RUIZHOU TECHNOLOGY CO., LTD.
Front View of RZCAM Computer Cutter
RZCAM flatbed series computer cutter is an automated numerical control equipment specially designed for cutting
patterns of shoes/garment/case/handbag industry. It adopts a self-developed embedded numerical control system, as
well as CPU and precise electronic components imported from the U.S., with its stability and operability reaching a
leading technical level at home and abroad. The cutter adopts imported linear rail combined with imported
synchronous belt drive, offering a complete zero error cutting prevision for traveling from and to the zero point. The
cutting speed can reach up to 60-100cm/s. It is safe and stable, with clear double-line LCD, elegant numerical
control interface, standard I/O interface, and supports HP-GL and GP-GL format. The cutter can be connected with
any CAD software, and its operation is simple and easy-to-learn. Currently, it is widely applied to the pattern cutting
of such industries as shoe-making, garment, case, handbag etc.
After you have purchased any model of the RZCAM flatbed series computer cutter, please be sure to read this
Manual carefully so that you can use this product properly and safely and fully understand its performance.
Cutter Structure
RZCAM cutting plotter is composed of the following components:
Cutter bracket + Cutter platform + RZCAM numerical control system + Drive mechanism + Cutter head
(Automatic switch between blade and pen)
1. Overall design of this machine is accomplished by specialized mechanical designer, offering a streamline
appearance and a flexible platform bracket with free-moving wheels. When user wants to change its position,
he/she only needs to open the wheel lock and gently push the cutting plotter to the desired position, which is
convenient and practical.
2. Cutting platform of this machine is equipped with several groups of horizontal adjusting mechanism. During
horizontal adjustment of the cutting plane, the level can be adjusted at any time according to the requirements of
the cutting plane, which overcomes the shortcoming that the platform cannot be adjusted after leaving the
factory.
3. This machine adopts a self-developed embedded numerical control system, as well as CPU and precise
electronic components imported from the U.S. It has simple and easy-to-learn operating interface, with its
stability and operability reaching a leading technical level at home and abroad.
4. The steady and smooth running of the drive part directly determines the cutting output quality of the cutter.
This machine adopts imported linear rail as the moving structure in X and Y direction, which, combined with
1
the imported synchronous belt, enables greater cutting precision.
5. The cutting head of this machine adopts a new technology where an automatic switch device is provided for
the blade and pen, which means it can be automatically switched to half blade cutting after pen drawing is
finished, and automatically switched to full blade cutting after half blade cutting is finished. In addition, cutting
blade forces can be set for any eight types of materials, enabling you to finish all drawing and cutting work at
one time.
Checking Accessories
Open the outer package of the wooden crate first, and then check Ruizhou computer cutter and its accessories,
which should include all of the following:
Machine Installation
2
1. Stand Installation
3
Second step finished image
4
Third step finished image
5
2. Truckle Installation
6
Tighten all the screws on the
truckles then put the stand
upwards. Finished image
7
3. Cutting Table Connection
First put the stand upwards and then lift the cutting table with two persons.
Note: Make sure the keyboard panel is at the side of the electric cabinet. See the following
image:
Keyboard Panel
8
Align the screw positions
under the table with the ones
on the side parts.
The screws should be put from
the bottom up.
9
Fix the screws with the cap on the
top.
Follows the same instructions to fix
the screws on the four corners.
10
Connect the plugs to the electric
cabinet respectively.
11
Use a small screwdriver to fix
the plugs onto the electric
cabinet.
Trachea Connector
Gasket
Metal Net
12
Connect the other side of the pipe to the connector on the aluminium plate under the cutting
table. Also, the metal clamp shall be fixed on the pipe.
13
Put the net here.
This place can be used to store your materials.
14
Operation Instructions 1 for RZCAM Series Cutter
Power switch
6A Fuse
2A Fuse
For connection to
220V power supply
15
Cutting Blade Installation
1. Remove the blade casing and screw off the blade cover as shown in the figure below
2. Put the cutting blade into the blade casing and push it to the bottom
3. Screw in the blade cover and leave 1.5~2mm of the blade tip outside (should be 0.2mm thicker than the
material to be cut) and ensure free rotation of the blade tip inside the blade casing
4. Put the blade casing into the cutting head and ensure it is completely against the bottom
5. Tighten the copper screws beside the blade casing to clamp it tight
16
Auto Paper Feeding
Turn on the power switch. The cutting head moves to the bottom right corner and the LCD shows:
RZCAM -××××
(hereinafter referred to as main screen)
RuizhouCAD/CAM
Move paper
Press . Press left to inch forward and press right to inch backward
Press and hold on the main screen. Release it when there is no display on the LCD. Now it shows:
Turn on the power switch. The cutting head should move to the bottom right corner and the LCD shows the string:
RZCAM -××××
RuizhouCAD/CAM
17
1. Adjust current blade pressure (adjust according to the thicknesses of different materials)
CUT DOWN: #2
68
Press to test blade pressure (cut a small rectangle with the blade around the bottom right corner)
until it just cuts off the paper
Press to test the pen and the blade (Draw a small rectangle with the pen and then cut the small
rectangle with the blade)
PEN OFFSET: X
0
Modification of Current Pen Properties (Adjust when computer settings differ from machine settings)
SET PEN: #2
Pen
18
Press or to select a pen size as the current pen
Press to modify current pen properties to make them correspond to those of the software (“Pen”:
Pen drawing, “Cut”: Blade cutting, or “Cut*”: Rotation cutting)
SPEED SELECT:
MIDDLE
Press or to switch the current overall speed among LOW, MIDDLE, MIDDLE HIGH
and HIGH speed (MIDDLE speed by default)
Press and hold the main screen and then press to show:
Cut Speed:
4985
1. Cutting speed
19
2. Pen drawing speed
Pen Speed:
4980
3. Moving speed
Mov Speed:
4995
4. Lowest speed
Low Speed:
4600
Length Calibration of X and Y (Set when the actual cut value deviates from the set value)
Press and hold and then press to enter into the first item of advanced settings:
20
CALIBRATE: X
A 350.0 0
Press to test the rectangle at A (bottom left corner), B (top left corner), C (top right corner) or D
(bottom right corner)
Normal Settings
1. Modification of current pen properties (Adjust when computer settings differ from machine settings)
SET PEN: #2
Pen
Press to modify current pen settings to make them correspond to those of the software (“Pen”: Pen
drawing, “Cut”: Blade cutting, “Cut*”: Rotation cutting)
21
2. Offset
OFFSET:
72
CUT EXTENSION:
0.3
Press or to change to perform rotation cutting after the multiplied extended offset
OVERRETURNS:OFF
GO O POINT: ON
22
OVERRETURNS: ON Return to the bottom right corner after cutting is over. When set to OFF, the cutting
head will not return to the bottom right corner automatically. Use or to modify the setting
GO O POINT: ON When PU0, 0 is set, the cutting head is allowed to move to the bottom left corner. When
set to OFF, it is not allowed to move to the bottom left corner. Use or modify the setting
X:0mm Y:0mm
Step: 250mm
Press to change the distance the cutting head will move each time an arrow key is pressed
Press to set the current cutting head position as the zero point
23
Advanced Settings
Press and hold on the main screen and then press to enter into the first item of
CALIBRATE: X
A 350.0 0
Press to test the rectangle at A (bottom left corner), B (top left corner), C (top right corner) or D
(bottom right corner)
MACHINE TYPE:
RZ0906
24
3. Reception mode
BACK RECEIVE:
OFF
For serial port reception, ON state is recommended for acceleration of reception speed
During back reception, several pages of data can be stored: After data of the first page has been sent and the
red indicator of PROMPT on the control panel has gone out, the data of the second page can be sent, and the
LCD will show:
2P 250K 10%
3#CUT100,72,130
2P means there are two pages of data in the machine, totaling 250K, which occupies 10% of the total memory.
If this percentage is about to reach 100%, you are advised to wait after several pages are finished and such
percentage is reduced before sending data again.
2P 250K 10%
Delete The Page?
OFF state means: Front reception (Cut after all data are received)
REINDEX:
OFF
25
4. Settings of Serial Port Parameters
BAUDRATE:
9600,8,1,none,H
1)Change of baud rate
Press or to select a baud rate from 4800, 9600, 19200, 38400 and 57600
Data Bits:
9600,8,1,none,H
Stop Bits:
9600,8,1,none,H
Parity:
Press to show the menu on the right:
9600,8,1,none,H
26
4)Change of parity bit
Handshake:
Hard(RTS/CTS)
Even force:
0
27
6. Reception language format
Language Format:
HP-GL
7. Resolution
RAM TO SERIAL:
Press to send the data received through serial port to the machine for testing
Press to exit
28
CRC RECEIVE:
1
Press or to modify the value. The greater the value is, the more stable but slower the
▲Caution: User is recommended not to modify the parameters in the advanced settings
Pressing and holding and at the same time to turn on the machine will restore the default
Pressing and holding and at the same time to turn on the machine will restore the factory
settings (Caution: This will restore all parameters to the factory settings)
Press to recut
Precautions
(1) The packaged computer cutter should be protected against upside-down vibration and collision;
(2) Keep the surface of the cutting platform clean. Adhesive contaminant can be wiped off using benzine or
alcohol;
(3) Do not place foreign objects such as scissor etc. on the surface of the cutting platform to avoid contact
with the cutting head when starting the machine;
(4) Do not plug or unplug the power plug when the line is energized;
(6) If malfunction of the machine occurs, please restart the machine. If the problem persists, please contact
the supplier;
(7) If the machine makes abnormal sound or its movement is obstructed, be sure to cut off the power supply
29
immediately and stop using the machine. Contact the supplier immediately;
(8) Maintenance of the linear rail: This machine adopts imported rail materials and technology, which
features high precision and seamless technology etc. Attention should be paid to cleaning and
maintenance during usage. Normally, the rail should be lubricated once every half month. Details
regarding specific operation techniques will be taught by trainers during in-house training.
广东瑞洲科技有限公司
30