Professional Documents
Culture Documents
Training system:
Input power: 12VDC. 220VAC Two phase three wires
Power consumption: Wind simulator: approx. 0.75KW Simulated sunlamp approx. 200W Output power: 220VAC/1500W 12VDC/500W
Rated charging power: Fan: 50- 600W PV cell: 40-300W
Rated charging current: Wind energy + Solar energy≤35A Overcharge protection voltage: DC13.2±0.2V
Unloading control mode: PWM Pulse Width Modulation Measuring instrument: DC volt meter, Ammeter, Volt meter, Ammeter, Load
Safetvy protection: Leakage protector, inverter DC side fuse Protect: Battery ant i-reverse charge,
anti-reverse connect ion, over-charging, thunder protection, current limiting, automatic brake
Simulation unit:
Wind Turbines: approx. 12V/300W. 3 blades. Wind wheel diameter approx. 1,26m
Wind tunnel simulation platform (Axial fan): 220V/0.75KW.0~ 1440r/min. wind volume:10000cbm/h,
0~12M/s Speed drive controller: approx. 220V/5KW
Wind speed alarming device: approx. 220VAC/12VDC.
Wind speed:0~60m/S ; measuring accuracy:±1°
Solar cell module: 1* monocrystal silicon 17.5V.10Wp, 1* polycrystalline silicon 17.5VDC.30Wp Solar simulator unit: 220VAC/100-500W
Unit parameter:
Measuring instrument: Input power 220/9VAC. Accuracy ±5% Off-grid inverter power supply : Input 9~15VDC.Output 0~ 220VAC.
Power 300W. Pure sine wave: 50Hz Hybrid PV/Wind Power controller: Input 12VDC. Output 600W:
mode: light control+ time control+ cycle timing. Communication function AC load: 220VAC, 100W lamp
Battery:
Lead-acid battery 12VDC/100Ah
Monitor device:
All-in-one PC With software