Professional Documents
Culture Documents
Assignment No.1: Name:-Ayush Gade Roll No.: - 06 #Pinout of 8085 Microprocessor
Assignment No.1: Name:-Ayush Gade Roll No.: - 06 #Pinout of 8085 Microprocessor
1
Name:- Ayush gade
Roll No.:- 06
03.ALE Output -
Indicates which
(Address Latch machine cycle is
Enable) currently executed by
processor.
Used to differentiate
04. S0 , S1 Output - between memory
(Status Signals) Location and I/O
operations.
Used for read
operation either from
05. IO/M—
memory or from
(Input, Output/ Output - input device.
Memory)
Used for write
operation either into
memory or into
output device.
06.RD—
(Read) Output Active low MP uses this pin to
acknowledge the
receipt of HOLD
signal.
11. CLOCKOUT
Used to reset the
microprocessor.
16. SID
(Serial input
Data)
- -
17. SOD
(Serial Output
Data)
- -
18. VSS and VCC
- -
19. X1, X2
- -