Professional Documents
Culture Documents
V6
INDEX
Why it works page 3
Certified tests page 4
Fields of applications page 5
Advantages on traditional systems page 6
Positioning AKKAUJET page 8
Models available page 10
Components Section page 20
Options available page 33
Why it works
0,4
0,35
0,3
mg/m³
0,15
0,1
0,05
0
Prova 1
Prova 2
Prova 3
Prova 4
control agencies.
4° C.
vehicle
whole area.
POSITIONING AKKUAJET 1
WIND DIRECTION ►
POSITIONING AKKUAJET 2
◄ WIND DIRECTION
Models Available
A-JET35S floor anchored
1. Blower 35 made in steel complete with electric motor-vent group, flow straighteners, high efficiency
vent, electric protection IP55, power 3kW 50Hz/230/400V, n.2 crowns in stainless steel with 64
nozzles in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for the mounting of hydraulic power pack, water pump, water filter,
electric power panel, complete with forklift and lifting points
3. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination -15°+55°,
hydraulic reducer with hydraulic rotation motor 0°-360°
4. Radio command for the complete control of the machine up to 100 meters,
2 radio frequencies (control of 2 units), machine control unit
5. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic
pump, hydraulic valves, electric valves rise-rotation, hydraulic hoses
6. Stainless steel water filter and filter cartridge, water passage diameter
2”, filtration power 100 micron, filter discharge valve, 2 crown lines
discharge 3 way valves, n.2 pressure manometers scale 0-60 bar, n.2
electric 2 way valves for crown on-off, n.1 pressure reducer, max
pressure 25 bar
7. Electric fan control circuit, anti-freeze crown pre heating system,
light warning system “Machine ON”, 3~EEC Socket 400V, phase inverter
8. Machine support made in steel
9. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
10. Length 1600mm, width 800mm, hight 1605mm
A-JET35S jacks
1. Blower 35 made in steel complete with electric motor-vent group, flow straighteners, high efficiency
vent, electric protection IP55, power 3kW 50Hz/230/400V, n.2 crowns in stainless steel with 64 nozzles
in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for the mounting of hydraulic power pack, water pump, water filter,
electric power panel, complete with forklift and lifting points
3. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination -15°+55°,
hydraulic reducer with hydraulic rotation motor 0°-360°
4. Radio command for the complete control of the machine up to 100 meters, 2 radio frequencies (control
of 2 units), machine control unit
5. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic
pump, hydraulic valves, electric valves rise-rotation, hydraulic hoses
6. Stainless steel water filter and filter cartridge, water passage
diameter 2”, filtration power 100 micron, filter discharge valve,
2 crown lines discharge 3 way valves, n.2 pressure manometers
scale 0-60 bar, n.2 electric 2 way valves for crown on-off, n.1
pressure reducer, max pressure 25 bar
7. Electric fan control circuit, anti-freeze crown pre heating system,
light warning system “Machine ON”, 3~EEC Socket 400V, phase inverter
8. Rising blower boom made in steel, max hight 2,3 meter, controlled
by hydraulic cylinder and hydraulic safety valve
9. 3 manual levelling jacks
10. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
11. Length 2336mm, width 1356mm, hight 2540mm
A-JET35S trailer
1. Blower 35 made in steel complete with electric motor-vent group, flow straighteners, high
efficiency vent, electric protection IP55, power 3kW 50Hz/230/400V, n.2 crowns in stainless
steel with 64 nozzles in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for the mounting of hydraulic power pack, water pump, water
filter, electric power panel, complete with forklift and lifting points
3. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination
-15°+55°, hydraulic reducer with hydraulic rotation motor 0°-360°
4. Radio command for the complete control of the machine up to 100 meters, 2 radio
frequencies (control of 2 units), machine control unit
5. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic
pump, hydraulic valves, electric valves rise-rotation, hydraulic hoses
6. Stainless steel water filter and filter cartridge, water passage diameter 2”,
filtration power 100 micron, filter discharge valve, 2 crown lines discharge
3 way valves, n.2 pressure manometers scale 0-60 bar, n.2 electric 2 way
valves for crown on-off, n.1 pressure reducer, max pressure 25 bar
7. Electric fan control circuit, anti-freeze crown pre heating system, light
warning system “Machine ON”, 3~EEC Socket 400V, phase inverter
8. fixed blower support made in steel, max hight 0,4 meter
9. 3 wheel trailer with folding axles and tow-bar, for job site use only,
2 manual levelling jacks
10. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
11. Length 2235mm, width 1951mm, hight 3075mm
A-JET35S trailer - folding boom
1. Blower 35 made in steel complete with electric motor-vent group, flow straighteners, high
efficiency vent, electric protection IP55, power 3kW 50Hz/230/400V, n.2 crowns in stainless
steel with 64 nozzles in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for the mounting of hydraulic power pack, water pump, water
filter, electric power panel, complete with forklift and lifting points
3. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination -15°
+55°, hydraulic reducer with hydraulic rotation motor 0°-360°
4. Radio command for the complete control of the machine up to 100 meters, 2 radio frequencies
(control of 2 units), machine control unit
5. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic pump, hydraulic valves,
electric valves rise-rotation, hydraulic hoses
6. Stainless steel water filter and filter cartridge, water passage diameter 2”,
filtration power 100 micron, filter discharge valve, 2 crown lines
discharge 3 way valves, n.2 pressure manometers scale 0-60 bar,
n.2 electric 2 way valves for crown on-off, n.1 pressure reducer,
max pressure 25 bar
7. Electric fan control circuit, anti-freeze crown pre heating system,
light warning system “Machine ON”, 3~EEC Socket 400V, phase
inverter
8. Rising blower boom made in steel, max hight 2,3 meter, controlled
by hydraulic cylinder and hydraulic safety valve
9. 3 wheel trailer with folding axles and tow-bar, for job site use only,
2 manual levelling jacks
10. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
11. Length 2712mm, width 1951mm, hight 2932mm
A-JET35S trailer – boom - generator
1. Blower 35 made in steel with electric motor-vent, flow straighteners, electric protection IP55, power
3kW 50Hz/230/400V, n.2 crowns in stainless steel with 64 nozzles in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for mounting of hydraulic power pack, water pump, water filter, electric
power panel, complete with forklift and lifting points
3. Generator with 2 cyl. Air cooled Diesel engine, power 11kW at 1500rpm, silenced, noise level
93LWA(68dB(A) -7m) autonomy 13h, sincro generator, ammeter, voltmeter, CE 3 phase socket,
malfunctioning alarms and low fuel level
4. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination -15°+55°,
hydraulic reducer, hydraulic rotation motor 0°-360°
5. Radio command for control of the machine up to 100 meters, 2 radio frequencies (control of 2 units)
6. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic pump, hydraulic valves, electric
valves rise-rotation, hydraulic hoses
7. Stainless steel water filter and filter cartridge, water passage diameter 2”,
filtration power 100 micron, filter discharge valve, 2 crown lines
discharge 3 way valves, n.2 pressure manometers scale 0-60 bar,
n.2 electric 2 way valves for crown on-off, n.1 pressure reducer,
max pressure 25 bar
8. Electric fan control circuit, anti-freeze crown pre heating system,
light warning system “Machine ON”, 3~EEC Socket 400V, phase
inverter
9. Rising blower boom made in steel, max hight 2,3 meter, controlled
by hydraulic cylinder and hydraulic safety valve
10. 3 wheel trailer with folding axles and tow-bar, for job site use only, 2
manual levelling jacks
11. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
12. Length 3131mm, width 1951mm, hight 3112mm
A-JET35S crawler – boom - generator
1. Blower 35 made in steel with electric motor-vent, flow straighteners, electric protection IP55, power
3kW 50Hz/230/400V, n.2 crowns in stainless steel with 64 nozzles in stainless steel 5 e 10 gpm (32+32)
2. Steel frame with canopy, set for mounting of hydraulic power pack, water pump, water filter, electric
power panel, complete with forklift and lifting points
3. Generator with 2 cyl. Air cooled Diesel engine, power 11kW at 1500rpm, silenced, noise level
93LWA(68dB(A) -7m) autonomy 13h, sincro generator, ammeter, voltmeter, CE 3 phase socket,
malfunctioning alarms and low fuel level
4. Hydraulic blower Inclination-Rotation system composed by hydraulic cylinder inclination -15°+55°,
hydraulic reducer, hydraulic rotation motor 0°-360°
5. Radio command for control of the machine up to 100 meters, 2 radio frequencies (control of 2 units)
6. Electric-Hydraulic Control Unit for the rising-rotation system, hydraulic pump, hydraulic valves, electric
valves rise-rotation, hydraulic hoses
7. Stainless steel water filter and filter cartridge, water passage diameter 2”,
filtration power 100 micron, filter discharge valve, 2 crown lines
discharge 3 way valves, n.2 pressure manometers scale 0-60 bar,
n.2 electric 2 way valves for crown on-off, n.1 pressure reducer,
max pressure 25 bar
8. Electric fan control circuit, anti-freeze crown pre heating system,
light warning system “Machine ON”, 3~EEC Socket 400V, phase
inverter
9. Crawler tracks with separate hydraulic control system
10. 2 coats of anti-rust layer, n.1 coat of polyurethane paint (blu)
11. Length 3131mm, width 1951mm, hight 3112mm
Component Section
nr. 8 Rollers
Available on request;
- hydraulic charging lid (picture)
- steel fenders
- tyres for agricoltural use
- road circulation equipment, with agricultural
homologation (picture)
Concrete base – Electric cables
Performance:
dosing capacity varies 0,2 - 2% (1:600 -1:60)
maximum water delivery 1 - 20m3/h
maximum water pressure 0,12 – 10 bar
maximum concentrated product delivery 2-400 l/h
Operating parameters: