Professional Documents
Culture Documents
Typical Environment
3
Light Loads
2 Moderate Loads
Increased Loads
1
Heavy Loads
2.
Application of slip resistant coloured priming coat Epoxy BS2000 with 5% Clean concrete
ADD 250 polymer beads. without surface
3.
sealer
Application of coloured Seal coat Epoxy BS3000 Matt/SG with 5% ADD
250 polymer beads.
Prepared concrete
and screeds
System Properties:
□ Slip resistant □ Easy to clean
Well adhered
□ Even finish □ No sand required existing coating,
subject to trial.
□ Water based □ Tough and colourful
□ Damp tolerant □ VOC Free
Surfaces prepared
□ Overcoat most existing paints □ Good opacity by hand grinding
□ Economic □ Smooth surface
□ Matt or silk gloss □ For mineral surfaces Suitably prepared
walls.
Remmers UK Ltd . Crawley . West Sussex . RH10 9NN . Tel.: +44 (0)845 373 0103 .
Fax.: +44 (0)845 3730104 .
www.remmers.co.uk
Flooring Specification Sheet 314
2 2
Item Operation Material / m Price / m
Surface Preparation
The substrate shall be prepared by suitable means to remove all
1 contaminants and weakness to give a clean, sound load-bearing surface. If
over coating an existing finish a trial shall be conducted to assess bond.
Top Coat
The primed surfaces are coated with Epoxy BS3000 SG/Matt blended with 2
3 0.25-0.3kg/m
up to 5% ADD 250 Polymer Beads.
Total
Notes: Application rates and coverage are theoretical and do not allow for surface profile variation, wastage or
variation in application technique. In the case of high substrate roughness you should allow for additional
levelling material to be used.
Remmers UK Ltd . Crawley . West Sussex . RH10 9NN . Tel.: +44 (0)845 373 0103 .
Fax.: +44 (0)845 3730104 .
www.remmers.co.uk