Professional Documents
Culture Documents
H s 5m
T 14 s
d 6m
a) Consider the case of a single piling supporting a small observation deck. From corrosion
considerations, the thickness of the tubular piling is 0.03 m. Assuming that the drag moment
predominates, develop an equation for the stress in the outer fiber of the base of the piling as
a function of the diameter D .
b) What is the required diameter D if the maximum allowable is 140MN / m2 ?
c) For the diameter determined in part (b), calculate the maximum inertia moment component and
express as a percentage of the maximum drag moment component?
d) Allowing a freeboard for the lower deck elevation of 3 m, at what elevation would this be?
agk cosh(k ( z d ))
ux cos(k x t )
cosh(kd )
K. N. Toosi University of Technology
Faculty of Civil Engineering
Coastal, Ports and Offshore Structures Engineering
Course title: Basics of Design of (Ordinary) Marine structures
Teaching assistant: Dr. Soheil Radfar
HW04 | Deadline: December 10, 2021
If you think some information is missing, you can assume it based on clear justifications.
Good Luck!
Soheil Radfar