Professional Documents
Culture Documents
1 2 2 3
1 Left rotary knob for direct gain adjustments
4 5 6 7
Connecting probes Changing settings (first operating level)
Connect the probe cable with the sockets on the top side of – Select with the left and right rotary knob the function
the instrument. When connecting a dual element probe group and function.
please observe the correct assignment of the cables:
– Select the value with the selection key (2) and change the
Transmitter: black – Receiver: red
highlighted value with the right rotary knob (3).
– Confirm the new value and exit with the selection key (2).
Switching on/off
– Connect the power supply/charger, if necessary. Select language and softkey function
– Briefly press the power button (7) to start the instrument.
– Select the second operation level Home key (long key
– Press the power button for 3 seconds to switch off. press).
– Select LANGUAGE (function group CONFIG1) with the
Second operating level (settings) selection key (2).
– Select language with the right rotary knob (3) and confirm
with the selection key (2).
– Select F# KEY (function group CONFIG3) with the selec-
tion key (2).
– Select the desired function of the softkeys (5) with the right
rotary knob (3) and confirm with the selection key (2).
– Select the softkey FUNCTION 1 to FUNCTION 4 (func-
tion group CONFIG3), and select the desired function for
the F1, F2, F3, and F4 keys with the right rotary knob and
confirm with the selection key (2).
USM 36 © GE Sensing & Inspection Technologies GmbH | Technical content subject to change without notice. 2013