This test certificate summarizes the results of tests conducted on a batch of enamelled copper wire. The wire was tested according to Bangladesh standard BDS-1034 (Part-5) for its surface, diameters, mechanical properties including elongation and springness, flexibility and adherence via mandrel and jerk tests, resistance to abrasion, chemical properties using solvent and solder tests, electrical properties including resistance and breakdown voltage, continuity of covering, thermal properties such as heat shock and cut through, and special tests including a 12dc solvent test. The tan delta and bending point were also reported. The wire was found to meet or exceed all specified test values and requirements.
This test certificate summarizes the results of tests conducted on a batch of enamelled copper wire. The wire was tested according to Bangladesh standard BDS-1034 (Part-5) for its surface, diameters, mechanical properties including elongation and springness, flexibility and adherence via mandrel and jerk tests, resistance to abrasion, chemical properties using solvent and solder tests, electrical properties including resistance and breakdown voltage, continuity of covering, thermal properties such as heat shock and cut through, and special tests including a 12dc solvent test. The tan delta and bending point were also reported. The wire was found to meet or exceed all specified test values and requirements.
This test certificate summarizes the results of tests conducted on a batch of enamelled copper wire. The wire was tested according to Bangladesh standard BDS-1034 (Part-5) for its surface, diameters, mechanical properties including elongation and springness, flexibility and adherence via mandrel and jerk tests, resistance to abrasion, chemical properties using solvent and solder tests, electrical properties including resistance and breakdown voltage, continuity of covering, thermal properties such as heat shock and cut through, and special tests including a 12dc solvent test. The tan delta and bending point were also reported. The wire was found to meet or exceed all specified test values and requirements.
SE PARA, KANCH PUR, SONARGAON,NARAYANGANJ,. BANGLADESH
TEST CERTIFICATE OF ENAMELLED COPPER WIRE
Report No:- 773 Batch No:- 3oM/HClto/04/18 Customer:- TEST REPORT FOR WALTON Repor Date:- 17-05-18 SWG/MM:- swg- 30 Type:- POLYTSTERT MtDE(PEt) -HC Grade:- Medium Test Standard: - BDS - 1034 (Part-S) Packing Slip No N/A Purchase Ord No:- N/A Date:- N/A P/O Date:- N/A TEST RESULTS sR. NO, TEST TEST Spec. Value UNIT OBSERVED VALUE 1 SURFACE SMOOTH SMOOTH 2 DIAMETERS e) OVERALL DIAMETER Min 0.350 mm 0.354 Max 0.367 mm 0.350 c)CONDUCTER DIAMETER Min 0.311 mm 0.312 Max 0.319 mm 0.314 ,INCREASE IN DIAMETER Min 0.035 mm 0.040 I) OUT OF ROUNDNESS t 0.004 mm 0.002 3 MECHANICAL PROPERTIES r)ELONGATION Min 23% (Ave) 36 c)SPRINGNESS Max CE Degree(Avg) 32 ,FLEXTBtLtW & ADHERENCE :i)MANDREL TEST Lxd NO CRACKS :ii}JERK TEST OK PASSED :iii)PEEL TEST Min NA Revolution (Avg) N/A I)RESISTANCE TO ABRASION Min 4.6 Force Newton 5.0 - 6.5 Avg 5.45 5.8 4 CHEMICAL PROPERTIES ]) SOLVENTTEST Min H Hardness (Avg) PASSEC
])SOLDER TEST Tinned & No Hole 3900 Visual ,NI
5 ETECTRICAT PROPERTIES r)RESISTANCE AT 20'C Min 0.2269 ohms/mts 0.2144987251.s Max 0,2721 ])BREAK DOWN VOLTAGE Min 4.40KV KV 7.5 - LO.zA ,CONTIN UITY OF COVERING Min 1000VDC 5Fl30 Mts 0 6 IHERMAL PROPERT!ES i)HEAT SHOCK Min 0,250d/200oc No Cracks NO CRACKS r)CUT THROUGH Min 300oC/1 Min To Pass PASSED 7 SPEC!AL TEST No Leakage in insulation. PASSED a) 12dc solvent test 8 TAN DELTA Min t75 oc 189 Bending Point Max 195 Note 9 Polysterimide (PEl) H- class is highlyThermal Resistance(180oc)where as Polyester(PE) B-Class is 130oc only.Higher Thermal Classes are having better heat,chamical and abrasion resistance.
NT. NOT TESTED
NA-NOT APPLICABTE Note:- \ 1) Confidential please do not print quote or reproduce. 2) The test results relate only to the samples tested. 3) This is computer generated test certificate hence dose not require signature /Xlr*; ( n ufi6ii-zEiTit'n a t u re )