This document summarizes the results of a uniaxial compressive strength test on a peridotite rock sample with dimensions of 50mm diameter and 100.31mm height. The sample was loaded incrementally up to 5200kg of force. Measurements were taken of axial and lateral deformations at each load level. Based on the test data, the uniaxial compressive strength of the sample was determined to be 26.50MPa, with a Poisson's ratio of 0.16 and elastic modulus of 6.77Gpa. Charts are presented showing the stress-strain behavior and results are summarized in a concluding table.
This document summarizes the results of a uniaxial compressive strength test on a peridotite rock sample with dimensions of 50mm diameter and 100.31mm height. The sample was loaded incrementally up to 5200kg of force. Measurements were taken of axial and lateral deformations at each load level. Based on the test data, the uniaxial compressive strength of the sample was determined to be 26.50MPa, with a Poisson's ratio of 0.16 and elastic modulus of 6.77Gpa. Charts are presented showing the stress-strain behavior and results are summarized in a concluding table.
This document summarizes the results of a uniaxial compressive strength test on a peridotite rock sample with dimensions of 50mm diameter and 100.31mm height. The sample was loaded incrementally up to 5200kg of force. Measurements were taken of axial and lateral deformations at each load level. Based on the test data, the uniaxial compressive strength of the sample was determined to be 26.50MPa, with a Poisson's ratio of 0.16 and elastic modulus of 6.77Gpa. Charts are presented showing the stress-strain behavior and results are summarized in a concluding table.