Distempering with oil bound washable distemper of approved
brand and manufacture to give an even shade :
8.2 New work (two or more coats) over and including water thinnable sqm 810 priming coat with cement primer including the cost of materials, labour etc. all complete as per direction of Engineer-in-Charge. Supplying and applying wheather proof exterior emulsion paint of make Asian paint apex or equivalent in Nerolac, Berger as approved of required shade on New work Two coats including base coat of exterior wall primer of as approved mak after cleaning / scrubbing of the surfaces with wire brushes, soft 8.3 Sqm 810 brushes, sand papers, steel sheet scrappers and mechanical grinder etc. for removing all kind of burrs, imperfections, undulations and other such defects existing in the surface to achieve plain & even surface including the cost of materials, labour etc. all complete as per direction of Engineer-in-Charge. Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or 8.4 sqm 50 more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Total Amount (Finishing work) 9 Sanitary Works Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all 9.1 each 1 fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making 9.2 each 1 good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap complete as per the directions of Engineer Incharge. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with 9.3 Each 2 brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern Proving and fixing HPL board urinal partition in curved 9.4 /rectangular shape including fixing to wall and all accessories Each 1 complete as per the directions of Engineer Incharge. Providing and fixing C.P brass bib cock of approved quality 9.5 Each 2 conforming to IS:8931 with : 15mm dia nominal bore Providing and fixing Sand cast iron S&S pipe as per IS: 1729 for 9.6 soil, waste and vent of 75 mm diameter including jointing, etc metre 50 complete as per directions of Engineer Incharge Total Amount (Sanitary Installation Work)
एनपीसीआईएल/जीएचएवीपी/सीटीसी/2021/पीटी-159 Page 159 of 163