Professional Documents
Culture Documents
Burnishing tool
Contacts on relays manufactured by
GEC ALSTHOM Protection & Control
are made and maintained at high
pressure. This ensures an extremely
reliable, low resistance contact even
under adverse operating conditions.
When cleaning is considered Contact pressure gauge Weights and dimensions
necessary, a burnishing tool should be The life and reliability of the contacts Pouch dimensions 190 x 50 x 90mm
used. Never use emery paper or is largely dependent on the specified Weight complete 0.25 kg
similar abrasive materials as these pressures being maintained.
may deposit insulating particles on the This tool gives a simple but sufficiently
contact surface and cause arcing. accurate means of measuring contact
pressure. The pressures are measured
A flexible burnishing tool is attached by deflecting a leaf spring against an
to the contact pressure gauge. It is a engraved scale. Two leaf springs are
strip of metal with the surface provided, giving values of two and
roughened by etching to resemble a ten grammes per scale division
very fine file. Its flexibility makes it (10 and 50 grammes maximum).
useful for cleaning contacts in
normally inaccessible positions. By
using the tool between closed pairs of
contacts the contacting surfaces are
cleaned.
Our policy is one of continuous product development and the right is reserved to supply equipment which may vary from that described.