Professional Documents
Culture Documents
1. A voltage v(t) = 141.4 sin (314t +10°) is applied to a circuit and a steady current given by
i (t) =14.14 sin (314t -20°) is found to flow through it. Determine
(i)the p.f. of the circuit(ii)the power delivered to the circuit Ans. (i)0.866 (ii) 865.74W
5. A series R-L-C circuit consists of R = 10, L= 0.318 H, C = 63.6 F and emf source e(t) =
100 sin 314t. Calculate :-
i) Expression for i(t) i(t) = 1.97 sin (314t-78.64)
ii) Phase angle between voltage and current 78.64 degree
iii) Power factor 0.197
iv)Active power consumed 19.4W
7.Find the value of an inductance which should be connected in series with a capacitor of 5μF, a
resistance of 10Ω and an ac source of 50 Hz so that power factor of the circuit is unity.
Ans. 2.03 H
(a) Calculate the value of C that will produce a quality factor of 50. Ans. C=0.625 microfarad
(b) Find half power frequencies and bandwidth. Ans.7920,8080 rad/sec and 160 rad/sec
(c) Determine the average power dissipated at resonant frequency and half power frequency
points. Ans. 1.25 KW and 0.625 KW
10. A resistor and a capacitor are in series with a variable inductor. When the circuit is connected
to 200V, 50 Hz supply the maximum current obtained by varying the inductance is 0.314 A.
The voltage across capacitor, when the circuit current is maximum, is 800V. Find the values
of series circuit elements. Ans. R=636.95 ohm, L=8.1 H, C=1.25 microfarad.
11. A coil is connected in series with a variable capacitor C. The supply voltage is 10 V at
1000rad/sec. The current in the circuit is maximum when C=10 microfarad. The current is
0.707 times the maximum current when C=12.5 microfarad. Find
(i) Inductance and resistance of the coil. Ans. L=0.1 H, R=20 ohm
(ii) Q of the coil at 1000rad/sec. Q=5
(iii) maximum current in the circuit. 0.5 amp.