Professional Documents
Culture Documents
Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 12/31/2014
Front Door Moulding
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. NOTICE: To avoid damage to moulding, only use moderate force.
Using a nonmarring trim removal tool, disengage the 14 retainer clips.
om
.c
er
ov
ec
itr
.b
w
w
2. Remove the moulding.
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/2
7/31/2016 2015 Edge
om
.c
Installation
1. To install, reverse the removal procedure.
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/2
7/31/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 07/14/2015
Front Door Upper Moulding
Removal
NOTE: Removal steps in this procedure may contain installation details.
NOTE: LH side shown, RH side similar.
All vehicles
1. Lower front side door glass.
om
.c
er
ov
ec
itr
.b
w
w
w
2. Remove the exterior mirror.
Refer to: Exterior Mirror (50109 Rear View Mirrors, Removal and Installation).
3. Remove the screw from the front and rear of the door moulding and remove the moulding.
Torque: 13 lb.in (1.5 Nm)
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/4
7/31/2016 2015 Edge
om
.c
er
4. Pull Bpillar glass run leg out of the Uchannel of the upper moulding.
Refer to: Front Door Glass Top Run (50111 Glass, Frames and Mechanisms, Removal and Installation).
ov
ec
itr
.b
w
w
w
Vehicles With: Keyless Entry
5. Remove the LHF door trim panel.
Refer to: Front Door Trim Panel (50105 Interior Trim and Ornamentation, Removal and Installation).
6. Disconnect the electrical connector.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/4
7/31/2016 2015 Edge
om
.c
er
7. Remove the door latch on the affected side to gain clearance for removal of the connector.
Refer to: Front Door Latch (50114 Handles, Locks, Latches and Entry Systems, Removal and Installation).
ov
All vehicles
8. Remove the 3 screws and 1 pushpin.
ec
Torque: 17 lb.in (1.9 Nm)
itr
.b
w
w
w
9. Detach the rear edge of the moulding from the door frame and pull the moulding upward to remove.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/4
7/31/2016 2015 Edge
om
.c
Installation
er
ov
1. To install, reverse the removal procedure.
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 4/4
8/1/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 12/31/2014
Liftgate Moulding
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (50105 Interior Trim and Ornamentation, Removal and Installation).
2. Disconnect the electrical connector.
om
.c
er
ov
ec
itr
.b
w
w
w
3. Remove the 2 bolts.
Torque: 55 lb.in (6.2 Nm)
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/3
8/1/2016 2015 Edge
om
.c
4. Remove the liftgate moulding.
er
ov
ec
itr
.b
w
w
w
Installation
1. To install, reverse the removal procedure.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/3
8/1/2016 2015 Edge
om
.c
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/3
8/1/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 12/31/2014
Rear Door Moulding
Base Part Number: 25556
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. NOTICE: To avoid damage to the moulding, only use moderate force.
Using a nonmarring trim removal tool disengage the 11 retainers from the door.
om
.c
er
ov
ec
itr
.b
w
w
w
2. Remove the moulding.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/2
8/1/2016 2015 Edge
om
.c
Installation
1. To install, reverse the removal procedure.
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/2
8/1/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 10/21/2015
Rear Door Upper Moulding
Removal
NOTE: Removal steps in this procedure may contain installation details.
1. Lower rear side door glass.
om
.c
er
ov
ec
itr
.b
w
2. Remove the front screw from the upper belt moulding.
w
Torque: 12 lb.in (1.4 Nm)
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/6
8/1/2016 2015 Edge
om
.c
3. Remove the rear screw from the upper belt moulding.
Torque: 12 lb.in (1.4 Nm) er
ov
ec
itr
.b
w
w
w
4. Disengage the retainer tabs along the length of the moulding and remove the moulding.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/6
8/1/2016 2015 Edge
om
.c
5. Pull the rear door glass run leg out of Uchannel of door moulding.
er
ov
ec
itr
.b
w
w
w
6. Remove 1 pushpin and 3 screws.
Torque: 17 lb.in (1.9 Nm)
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/6
8/1/2016 2015 Edge
om
.c
er
7. Detach the front edge of the moulding from the door frame and pull the moulding upward to remove.
ov
ec
itr
.b
w
w
w
8. Pull the rear door glass run leg out of Uchannel of door moulding.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 4/6
8/1/2016 2015 Edge
om
.c
9. Remove 1 pushpin and 3 screws.
Torque: 17 lb.in (1.9 Nm) er
ov
ec
itr
.b
w
w
w
10. Detach the rear edge of the moulding from the door frame and pull the moulding upward to remove.
Torque: 17 lb.in (1.9 Nm)
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 5/6
8/1/2016 2015 Edge
om
.c
Installation
1. To install, reverse the removal procedure.
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 6/6
8/1/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 12/23/2015
Rear Spoiler
Removal
NOTE: Removal steps in this procedure may include installation details.
1. Remove the liftgate trim panel.
Refer to: Liftgate Trim Panel (50105 Interior Trim and Ornamentation, Removal and Installation).
2. Disconnect the electrical connector and washer hose.
om
.c
er
ov
ec
itr
.b
w
w
w
3. Remove the 4 nuts.
Torque: 55 lb.in (6.2 Nm)
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/5
8/1/2016 2015 Edge
om
.c
4. Remove the 2 nuts.
Torque: 55 lb.in (6.2 Nm) er
ov
ec
itr
.b
w
w
w
5. Using a nonmarring trim tool detach foam tape along lower edge of spoiler.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/5
8/1/2016 2015 Edge
om
.c
6. Remove the spoiler.
er
ov
ec
itr
.b
w
w
w
Installation
1. Clean the liftgate glass.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 3/5
8/1/2016 2015 Edge
om
.c
er
2. Apply twosided foam tape (obtain locally) if reusing existing spoiler.
ov
ec
itr
.b
w
w
w
3. To reinstall, reverse the removal procedure.
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 4/5
8/1/2016 2015 Edge
om
.c
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 5/5
8/1/2016 2015 Edge
50108 Exterior Trim and Ornamentation 2015 Edge
Removal and Installation Procedure revision date: 12/31/2014
Roof Rail
Removal
NOTE: Removal steps in this procedure may include installation details.
1. Lower the headliner assembly.
Refer to: Headliner Lowering (50105 Interior Trim and Ornamentation, Removal and Installation).
2. Remove 4 bolts on each side.
Torque: 72 lb.in (8.1 Nm)
om
.c
er
ov
ec
itr
.b
w
w
w
3. Remove the roof rail(s).
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 1/2
8/1/2016 2015 Edge
om
.c
Installation
1. To install, reverse the removal procedure.
er
ov
ec
itr
.b
w
w
w
http://www.fordtechservice.dealerconnection.com/vdirs/protech/global/default.asp?comefrom=Motocraft 2/2