You are on page 1of 6

DOCUMENT NO.

SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

Summary of Results for U-Trough Walls:

A. Module 7

U-Through Wall Overall Height (from its base) = 7800 mm


Internal width = 20200 mm
Wall thickness, tw = 1000 mm
Base thickness, tb = 1500 mm

Properties:
Concrete cube strength, fcu MPa = 36 MPa
Steel yield strength (Main), fy MPa = 500 MPa

Allowable Values:
Compressive stress, 0.60*fcu MPa = 21.6 MPa
Tensile stress, 0.60*fy MPa = 300 MPa

Section
Dimension Main
Location Description
on ASBD Reinforcement
(mm)
Wall 1050x1000 B32-150

B25-150 (Hog)
Base Slab Near Face of Wall 1050x1500
Module 7 B32-150 (Sag)

B25-150 (Hog)
Base Slab Mid 1050x1500
B25-150 (Sag)
DOCUMENT NO. SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

Service Limit State Check


SLS
Descriptio Actual Actual/Allowable Ratio
Moment
n Compression Tension Remarks
kN-m Sactual (mm) Compression Tension Smax
(MPa) (MPa)

WALL 654 3.34 29.00 150.00 0.15 0.10 1649.32 Ok

Base Slab
Near Face 839 1.87 19.81 150.00 0.09 0.07 2635.64 Ok
of Wall

392 0.89 9.75 150.00 0.04 0.03 5580.00 Ok


Base
Slab Mid
801 1.83 19.93 150 0.08 0.07 2636.43 Ok

Extreme Event Check


Main Applied Demand Capacity Demand/ Shear Links
Description Links
Reinforcement Shear Moment Moment Capacity Min./Req'd. Remarks
(kN-m) (kN-m) Ratio (mm2/m)
no links
WALL B32-150 (Sag) 461 1614 2266 0.71 1.05 OK
provided
no links
B25-150 (Hog) 4189.00
provided
Base Slab
Max
Near Face
My
246 1869 3442.05 0.54 1.05 OK
of Wall no links
B32-150 (Sag)
provided
Max Fz 216 1846 3442.08 0.54 1.05 OK

no links
B25-150 (Hog) 20 553 2143.98 0.26 1.05 OK
provided
Base Max
158 1784 2143.98 0.83 1.05 OK
Slab Mid My no links
B25-150 (Sag)
provided
Max Fz 213 1740 2143.98 0.81 1.05 OK
DOCUMENT NO. SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

B. Module 8

U-Through Wall Overall Height (from its base) = 5900 mm


Internal width = 20200 mm
Wall thickness, tw = 850 mm
Base thickness, tb = 1000 mm

Properties:
Concrete cube strength, fcu MPa = 36 MPa
Steel yield strength (Main), fy MPa = 500 MPa

Allowable Values:
Compressive stress, 0.60*fcu MPa = 21.6 MPa
Tensile stress, 0.60*fy MPa = 300 MPa

Section
Dimension Main
Location Description
on ASBD Reinforcement
(mm)
Wall 1050x850 B25-150

B20-150 (Hog)
Base Slab Near Face of Wall 1050x1000
Module 8 B32-150 (Sag)

B20-150 (Hog)
Base Slab Mid 1050x1000
B25-150 (Sag)
DOCUMENT NO. SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

Service Limit State Check


SLS
Descriptio Actual Actual/Allowable Ratio
Moment
n Compression Tension Remarks
kN-m Sactual (mm) Compression Tension Smax
(MPa) (MPa)

WALL 334 2.40 20.46 150.00 0.11 0.07 2351.00 Ok

Base Slab
Near Face 419 2.26 11.01 150.00 0.10 0.04 4657.55 Ok
of Wall

414 2.09 21.67 150.00 0.10 0.07 2292.33 Ok


Base
Slab Mid
401 2.06 20.46 150 0.10 0.07 2438.46 Ok

Extreme Event Check


Main Applied Demand Capacity Demand/ Shear Links
Description Links
Reinforcement Shear Moment Moment Capacity Min./Req'd. Remarks
(kN-m) (kN-m) Ratio (mm2/m)
no links
WALL B25-150 329 1073 1188 0.90 1.05 OK
provided
no links
B20-150 (Hog) 4189.00
provided
Base Slab
Max
Near Face
My
192 1185 2175.86 0.54 1.05 OK
of Wall no links
B32-150 (Sag)
provided
Max Fz 159 1088 2175.86 0.50 1.05 OK

no links
B20-150 (Hog) 14 629 910.114 0.69 1.05 OK
provided
Base Max
109 1121 1369.21 0.82 1.05 OK
Slab Mid My no links
B25-150 (Sag)
provided
Max Fz 343 282 1369.21 0.21 1.05 OK
DOCUMENT NO. SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

C. Module 9

U-Through Wall Overall Height (from its base) = 4250 mm


Internal width = 20200 mm
Wall thickness, tw = 650 mm
Base thickness, tb = 650 mm

Properties:
Concrete cube strength, fcu MPa = 36 MPa
Steel yield strength (Main), fy MPa = 500 MPa

Allowable Values:
Compressive stress, 0.60*fcu MPa = 21.6 MPa
Tensile stress, 0.60*fy MPa = 300 MPa

Section
Dimension Main
Location Description
on ASBD Reinforcement
(mm)
Wall 1050x850 B25-150 (Sag)

B20-150 (Hog)
Base Slab Near Face of Wall 1050x1000
Module 9 B25-150 (Sag)

B20-150 (Hog)
Base Slab Mid 1050x1000
B25-150 (Sag)
DOCUMENT NO. SHEET

CAT II CHECK
SUBJECT GROVE NORTH EASTERN ACCESS UNDERPASS
U-Trough Design Check
REFERENCE CALCULATIONS OUTPUT

Service Limit State Check


SLS
Descriptio Actual Actual/Allowable Ratio
Moment
n Compression Tension Remarks
kN-m Sactual (mm) Compression Tension Smax
(MPa) (MPa)

WALL 151 1.86 13.80 150.00 0.09 0.05 3379.32 Ok

Base Slab
Near Face 196 2.50 10.82 150.00 0.12 0.04 4363.86 Ok
of Wall

260 3.03 28.14 150.00 0.14 0.09 1597.44 Ok


Base
Slab Mid
271 3.24 27.96 150.00 0.15 0.09 1592.85 Ok

Extreme Event Check


Main Applied Demand Capacity Demand/ Shear Links
Description Links
Reinforcement Shear Moment Moment Capacity Min./Req'd. Remarks
(kN-m) (kN-m) Ratio (mm2/m)
no links
WALL B25-150 (Sag) 233 704 847 0.83 1.05 OK
provided
no links
B20-150 (Hog) 4189.00
provided
Base Slab
Max
Near Face
My
146 762 821.46 0.93 1.05 OK
of Wall no links
B25-150 (Sag)
provided
Max Fz 195 292 821.46 0.36 1.05 OK

no links
B20-150 (Hog) 18 426 566.35 0.75 1.05 OK
provided
Base Max
66 736 826.87 0.89 1.05 OK
Slab Mid My no links
B25-150 (Sag)
provided
Max Fz 187 498 826.87 0.60 1.05 OK

You might also like