Professional Documents
Culture Documents
Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft,
impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. The mechanical shaft seal is
a special designed, unbalanced O-ring seal. Pipework connection is via internal Whitworth pipe threads, Rp (ISO 7/1).
The pump is fitted with a 1-phase, foot-mounted, fan-cooled asynchronous motor.
Pump
A combination of a stop ring and a Nord-lock® washer secures a tight and reliable fixation of the impeller spacing pipes to the splined
pump shaft. It is possible to remove and fit the hydraulic parts from the pump side. The inlet part, chambers and discharge part are held
together by four staybolts.
The pump is fitted with an unbalanced O-ring seal with a rigid torque-transmission system. It has a fixed seal driver ensuring a reliable
rotation of all parts. The dynamic secondary seal is an O-ring.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing offers good
resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The pump shaft is connected to the motor shaft through a left thread and tight fit. The shaft cannot be dismantled.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to EN 50347. Electrical tolerances comply with EN 60034.
Technical data
Controls:
Frequency converter: NONE
Liquid:
Pumped liquid: Water
Liquid temperature range: 253 .. 363 K
Selected liquid temperature: 293 K
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2900 rpm
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
Count Description
Rated flow: 4.7 m³/h
Rated head: 30.69 m
Code for shaft seal: AQQE
Approvals: CE,EAC
Approvals for drinking water: WRAS,ACS,NSF61
Curve tolerance: ISO9906:2012 3B
Materials:
Pump housing: Cast iron
EN-GJL-200
ASTM A48-25A
Impeller: Stainless steel
EN 1.4301
AISI 304
Installation:
Range of ambient temperature: 253 .. 328 K
Maximum operating pressure: 1000 kPa
Max pressure at stated temperature: 1000 kPa / 363 K
1000 kPa / 363 K
Type of connection: Rp
Size of suction port: 1 1/4 inch
Size of outlet port: 1 inch
Outlet position: 12
Electrical data:
Motor standard: IEC
Frame size: 80A
Rated power - P2: 0.67 kW
Main frequency: 50 Hz
Suitable for 50/60 Hz: N
Phase: 1
Rated voltage: 220-240 V V
Service factor: 1.00
Rated current: 4.4-4.0 A
Starting current: 390-390 %
Rated speed: 2720-2800 rpm
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F
Built-in motor protection: PTO
Cable included (Yes/No): N
Others:
Terminal box position: 12
Minimum efficiency index, MEI ≥: 0.7
Net weight: 13.6 kg
Gross weight: 16 kg
Danish VVS No.: 385211054
Country of origin: HU
Custom tariff no.: 84137090
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
40 80
35 70
30 60
25 50
20 40
15 30
10 20
5 10
0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Q [m³/h]
P NPSH
[W] [m]
1000 10
P1
800 8
P2
600 6
400 4
200 2
0 0
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
H CM 5-4, 1*230 V, 50Hz eta
Description Value [m] [%]
Pumped liquid = Water
General information: Liquid temperature during operation = 293 K 90
Product name: CM 5-4 A-R-A-E-AQQE C-A-A-N Density = 998.2 kg/m³
40 80
Product No.: 97516570
EAN: 5700317301795
35 70
Technical:
Pump speed on which pump data are based: 2900 rpm
30 60
Type of connection: Rp
0 0
Size of suction port: 1 1/4 inch 362
148.5 75
96 158
125
148.2
123.7
137
213.8
208.3
Rp 1
3/810.5
1/4
Rp 3/8Rp 1 141
120.8
241.2
Liquid:
Rp 1 1/4
Pumped liquid: Water Rp 3/8
208.3
148.5
10.5
Selected liquid temperature: 293 K
Density: 998.2 kg/m³ 125 96 148.2
158
Electrical data: 213.8 123.7
137
Motor standard: IEC 362
Others:
Terminal box position: 12
Minimum efficiency index, MEI ≥: 0.7
L
cos phi
I
0.8 4.0
eta
0.6 3.0
0.4 2.0
0.2 1.0
0.0 0.0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 P2 [kW]
n P1
[rpm] [kW]
3000
P1
2800 0.8
n
2600 0.6
2400 0.4
2200 0.2
2000 0.0
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
Rp 1 1/4
Rp 3/8
Rp 1
120.8
123.7
148.2
362
137
96
241.2
213.8
208.3
148.5
75
141
125
158
Rp 3/8
10.5
AUX
MAIN
LN
MG71/80
164e
151a
156
159a 151
164d
181
150 152
164g
159
164c 154
164b 51
153
155
191
79
157a
158 28g
156b
164e MG90/100
151a
164f 159a
158a 151
181
164
152
156a
156
51
150
153
155 191
79
157a
158
159
156b 154 28g
2
4f
2b
158a 64
64
4
139b
64
49
4a
64a
4e
64c
6 67
25 104
111
108
26 112
47a 102
103
107
66
111a
11
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
Sectional drawing
165x100
Company name: TiEngineer | Pumps and water systems
Created by: Eng.Mohamed Abdulrahman
Phone: 00201091177502
Email: moh@tiengineer.com / sales@tiengineer.com
Date: 1/29/2022
Service parts CM 5-4, Prod number 97516570
Produced After 0927 (production year and week number)