Professional Documents
Culture Documents
SEAL WATER
SPOOL 1.5"
AREA: 3510
INFORMATION ONLY
Authorization to proceed does not relieve Contractor/Supplier of its
responsibility or liability under the Contract and or Purchase Order.
By Guillermo Astudillo at Jun 02, 2020
DATA SHEET
Document: YOKO-PI-023-QVC-DS-J-3510-SJ04-014-A PLANT: DATE:
Electronic file: 19/05/2020
Q1CO
YOKO-PI-023-QVC-DS-J-3510-SJ04-014-A-GLANDSEALWATER_SPOOL1_2_0.PDF PAGE: 1 OF: 12
INDEX
DATA SHETT
PAGE REV. DOCUMENT
NAME: REV.
MQ13-02-DS-3510-INSJ004_R0 0 3 0
DATA SHEET
Document: YOKO-PI-023-QVC-DS-J-3510-SJ04-014-A PLANT: DATE:
Electronic file: 19/05/2020
Q1CO
YOKO-PI-023-QVC-DS-J-3510-SJ04-014-A-GLANDSEALWATER_SPOOL1_2_0.PDF PAGE: 2 OF: 12
Requisition number: 700505-01 P. O. number: 700505-01
Rev. No. Item Number Tag Number Instrument Type Page No.
0 1 3510-FSL -187 THERMAL DISPERSION FLOW SWITCH S-1
0 2 3510-PCV -183 SELF OPERATED PRESS CONTROL VALVE S-2
0 3 3510-PI -188 PRESSURE INDICATOR S-3
0 4 3510-YV -189 BALL CONTROL VALVE S-4
*****PIPES*****
5365120 PIPE SCH 40S SMLS 316/316L SS A312
*****FITTINGS*****
5480140 TEE 3000# SW 316/316L SS
5480142 COUPLING 3000# SW 316/316L SS
5537071 SOCKOLET 3000# 316/316L SS
*****NIPPLES*****
5540512 NIPPLE SCH 40S 316/316L SS TBE 4" LONG (THREAD BOTH ENDS)
5540522 NIPPLE SCH 40S 316/316L SS TOE 4" LONG (THREAD ONE END - PLAIN ONE END)
*****FLANGES*****
5608701 FLG SW 150# RF 316/316L SS 40S BORE
*****GASKETS*****
5669368 GASKET 150# RING PTFE 1/8" THK
*****BOLTING*****
5675681 STUD-BOLT 316 SS A193 GR B8M W/A194 GR 8M NUTS
5675691 CAP SCREW HEX HEAD 316SS A193 GR B8M UNC
NOTES:
******
1. Yokogawa confirms that the spool meet the following specifications - MQ13-02-TE-0000-IN0505, Piping Material Specification Line Class - AG1
and Site Conditions Technical Specification - MQ11-02-TE-0000-ME0001.
2. Spool includes a separate NEMA type 4X/IP66 junction box, fully assembled, 3 x 3/4" NPT conduit entries for customer use. The junction box
shall be firmly mounted to the ball valve actuator by means of bracket designed for it.
3. Junction box include combined lightning current and surge arresters (DEHN brand) for power supply and signal circuits. For mandatory
specifications and wiring see drawing No. MQ13-02-DR-0000-IN1080.
4. All cable entries shall be supplied with suitably rated plugs to maintain the IP66 rating during shipping and storage.
5. Junction box shall include stainless steel name plate with spool tag number engraved.
6. Yokogawa confirms that the spool shall be supplied completely assembled, wired, tested and ready for installation.
Binder Package
General Notes
Template: GENERAL SPOOL DATA
0 DP 5/14/2020 Issued for Construction 3510-SJ-004, Gland seal water spool
A DP 5/7/2020 Issued for Internal Review Page N-1 of 1
No. By Date Description Doc. No.: MQ13-02-DS-3510-INSJ004 Rev.: 0
1 Tag No. 3510-FSL -187 Project Name Q1CO
2 P&ID No. MQ11-02-DR-3510-PD1004 Plant Name Q1CO
GENERAL
3 Service GLAND SEAL WATER TO PUMP 3510-PU-004 Area Name 3000
4 Unit Name 3510
5 Line No. 3510-6655-AG1-1-1/2"-GW-N Construction Work Package 35100020007
6 Equipment No. 3510-PU-004 Amb. Temp. Min. to Max. -6.1 to +21.7 °C
7 Area Classification Non-Hazardous Altitude Sour Service 3600 m.a.s.l. ---
8 Line Size Schedule / Internal Diameter NPS 1 1/2 40S / 1.61 in
PIPE
16 Temperature °C 10
17 Specific Gravity 1.
18 Molecular Weight 18.02
19 Viscocity cP 1.31
20 Compressiblity Factor
21 Corrosive Material Build-up Tendency Yes No
22 Design Pressure Design Temperature 1034 kPa-g 37 °C
23
24 Element Type Thermal Dispersion
25 Mounting Insertion, Top Mounted
26 Process Connection 3/4" MNPT
27 Element Material 316/316L SS
ELEMENT
28 Pressure Rating Max Temperature Rating (Min to Max) Vacuum to 3000 psig -70 to 200°C
29 Wetted Parts Material Wetted O - Ring Material 316/316L SS ---
30 Fill Fluid ---
31 Insertion Length 4 inches
32 Max. Pressure Drop ---
33 Manufacturer SOR
34 Model No. EAC-8A-CS-4-C8
35 Switch Type Switch Quantity Snap Action 1
36 Electrical Certification Enclosure Rating General Purpose NEMA 4 CSA Explosion-Proof
37 Housing Material Housing Paint Aluminum Polyester based coating
38 Power Supply Full Load Current External 120 V AC 60 Hz 85 mA
39 Wiring Connection Type Electrical Conduit Connection Screwed 2x 3/4" FNPT
SWITCH
INSTRUMENT SPECIFICATION
Flow Switch
0 DP 5/14/2020 Issued for Construction
A DP 5/7/2020 Issued for Internal Review Sheet S-1.2 of 8
No. By Date Revision Code: 1202 Dwg. No.: MQ13-02-DS-3510-INFSL187 Rev.: 0
1 Tag No. 3510-PCV -183 Project Name Q1CO
2 P&ID No. MQ11-02-DR-3510-PD1004 Plant Name Q1CO
GENERAL
3 Service GLAND SEAL WATER TO PUMP 3510-PU-004 Area Name 3000
4 Unit Name 3510
5 Line No. 3510-6655-AG1-1-1/2"-GW-N Construction Work Package 35100020007
6 Equipment No. 3510-PU-004 Amb. Temp. Min. to Max. -6.1 to +21.7 °C
7 Area Classification Non-Hazardous Altitude Sour Service 3600 m.a.s.l. ---
8 Barometric Pressure 65.73 kPa
9 Line Size / Schedule / I.D. In NPS 1 1/2 40S / 1.61 in
PIPE
INSTRUMENT SPECIFICATION
Pressure Regulator
0 DP 5/14/2020 Issued for Construction
A DP 5/7/2020 Issued for Internal Review Sheet S-2.2 of 8
No. By Date Revision Code: 0904 Dwg. No.: MQ13-02-DS-3510-INPCV183 Rev.: 0
1 Tag No. 3510-PI -188 Project Name Q1CO
2 P&ID No. MQ11-02-DR-3510-PD1004 Plant Name Q1CO
GENERAL
3 Service GLAND SEAL WATER TO PUMP 3510-PU-004 Area Name 3000
4 Unit Name 3510
5 Line No. 3510-6655-AG1-1-1/2"-GW-N Construction Work Package 35100020007
6 Equipment No. 3510-PU-004 Amb. Temp. Min. to Max. -6.1 to +21.7 °C
7 Altitude Sour Service 3600 m.a.s.l. ---
8 Fluid Fluid Phase SEAL WATER Water
9 Process Condtions Units @Norm @Max
PROCESS
INSTRUMENT SPECIFICATION
Pressure Gauge
0 DP 5/14/2020 Issued for Construction
A DP 5/7/2020 Issued for Internal Review Sheet S-3.2 of 8
No. By Date Revision Code: 0401 Dwg. No.: MQ13-02-DS-3510-INPI188 Rev.: 0
1 Tag No. 3510-YV -189 Project Name Q1CO
2 P&ID No. MQ11-02-DR-3510-PD1004 Plant Name Q1CO
GENERAL
3 Service GLAND SEAL WATER TO PUMP 3510-PU-004 Area Name 3000
4 Unit Name 3510
5 Line No. 3510-6655-AG1-1-1/2"-GW-N Construction Work Package 35100020007
6 Equipment No. 3510-PU-004 Amb. Temp. Min. to Max. -6.1 to +21.7 °C
7 Area Classification Non-Hazardous Altitude Sour Service 3600 m.a.s.l. ---
8 Valve Control Type On-off Barometric Pressure 65.73 kPa
9 Size/ Schedule/ In NPS 1 1/2 / 40S / 1.61 in 69 Actuator Manufacturer & Model Air Torque/AT301U S10 LFR
10 Internal Dia. Out NPS 1 1/2 / 40S / 1.61 in 70 Actuator Type Rack & Pinion - Single Acting
PIPE
ACTUATOR
13 Fugitive Emission Category --- 73 Actuator Size Volume AT 301 U O: 0.71L C:1.1L
14 Case --- 74 Min Reqd Press Max Allow Press 4.5 bar-g 8 bar-g
15 Governing Case --- 75 Bench Range Mech.Limit Stop 10 Springs Open/Close
16 Fluid SEAL WATER 76 Valve Fail Position Open
17 Fluid Phase Water 77 Casing Material Extraded aluminum, coated
18 Process Condtions Units @Max Flow 78 Actuator Locking Device ---
19 Flow l/min 45 79 Op. Speed (stroke time) [s]: 0.6
20 Inlet Pressure kPa-g 851.4 80 Pos Tag No ---
21 81 Positioner Manufacturer & Model ---
22 82 Positioner Type
POSITIONER
23 83 Input Signal ---
PROCESS
SWITCH
31 91 Switch Type Quantity --- ---
32 Shutoff Press Allowable SPL 851 kPa 85 dBA 92 Rating (Amps/Volts) Herm Sealed --- --
33 % Solids % Flashing 93 Actuation Points Form --- ---
34 Critical Press Critical Temp kPa-a 94 Switch Electrical Certification ---
35 Design Press Design Temp 1034 kPa-g 37 °C 95 Air Set Manufacturer & Model Samson / 7029
AIR SET
36 Corrosive Erosive Toxic Yes No No 96 Air Supply Press Min Norm Max 0.5 5.5 6 bar-g
37 Containing Diesel Liquid No 97 Set Pressure Pneu Connection 5.5 bar-g G 1/4
38 98 Filter Gauge Yes One
39 Body Type Ball 99 Solenoid Tag No(s) 3510-YY-189 ---
40 Size 1.5 in 100 Solenoid Manufacturer & Model Micro / 0259032522202
SOLENOID
41 Leakage Class ANSI IV (standard) 101 Solenoid Type Manual Override 3/2 / 1/4 in Yes
42 Body/Bonnet Material A 351 CF8M 102 Solenoid Rating / Power Supply 110V, 50/60 Hz
VALVE BODY
43 Liner Material ID --- --- 103 When De-Energized Valve CV Open 1.6
44 End In NPS 0 in 104 Enclosure Rating IP 65
45 Connection Out NPS 0 in 105 Solenoid Electrical Certification M5X 0.8
46 Flg Face Finish ASME B16.5 106 Junction Box Yes, Standard Terminal Box
47 End Ext / Material A 351 CF8M 107 Cable Entry or Conn SS Tag Plate(s) --- Yes
OPTIONS
48 Flow Direction Bonnet Type Bidirectional --- 108 Surge Protection Device 1x 920 389 +1x 920 300
49 Lub & Iso Vlv Lube --- --- 109 Fail Position System No
50 Packing Material Packing Type PTFE Soft 110 Stem Bellow Protector ---
51 Bolt/Nut Material A193 Gr.B8M/A194 Gr.8M 111
52 112 Radiography ---
53 Trim Type Ball 113 Magnetic Particle ---
54 Size Rated Travel 1.5 in 90° 114 Liquid Penetrant ---
TESTING AND CERTIFICATION
65 Model Number FIG.Z16 TTTGV 125 Post Weld Heat Treatment (PWHT) ---
66 P.O. No Item No 700505-01 126 Calibration Certificate ---
67 Serial No After Manufacturing 127 Configuration Certificate ---
68 128 Canadian Registration Number ---
See notes
NOTES
INSTRUMENT SPECIFICATION