Professional Documents
Culture Documents
Table of Contents
+ Digital Communication System Installation 10 Our customers choose Avire because we are committed to exceeding
their expectations and we strive for excellence in everything we do.
+ The Avire Hub 11
+ PSTN Telephones 12
Avire is part of the Infrastructure Safety Sector of Halma plc, a FTSE100
company with an annual turnover of over £1bn. Halma is an international
+ Memcom+ 14 leader in safety, medical and sensor technology with over 5,800
+ Car Operating Panel Accessories 15 employees in around 50 businesses worldwide.
+ Memcom Accessories 17 Memco® products have led the way with elevator-safeguarding for 40
+ Introduction to Light Curtains 21
years and have built a brand which is synonymous with trust, reliability
and exceptional quality. Our products are now sold widely across the
+ Panachrome+ 22 world to meet legislative demands and technology advances.
+ Pana40 Plus 24
Avire is committed to delivering innovative, high-quality engineering
+ Contacts 26 solutions that offer significant value to our customers. Investing in our
research & development capability is of key importance to us and we
now have Engineering teams dedicated to the development of Memco
products located in the UK, Czech Republic and Spain.
11
Digital Communication System
Using data to improve efficiency is not a new concept and the Digital Communications System
brings this to lifts, without the cost and hassle of installing a new controller. With remote
configuration and monitoring the DCP allows customers to have real time information regarding
lift status for the purposes of predictive maintenance and to inform decision making.*
The products within the Digital Communications System are easy to install as we understand
the need for minimising installation and programming time. There are also options for both on
site and remote programming.
The Avire Hub is a cloud based platform and allows for monitoring and configuration from any
internet connected device. The Avire Hub's intuitive user experience takes the hassle out of
monitoring devices and staying compliant to industry standards with actions such as 3 day test
calls and technical alerts.
*Currently of Memco Emergency Telephones systems but soon to be extended to our other product lines, and
in future full lift monitoring.
2 3
Digital Communication System
The Memco DCP combines a GSM gateway, emergency telephone and M2M ++ Integrated battery back-up
gateway in a single unit. ++ 4-wire CAN Bus connections to lift
car, landing and pit devices
This system is ideal for those seeking to:
++ High audio quality over 400m cables
• Install an EN81-28 compliant emergency telephone system for up to four
lifts ++ Technical, 3-day background and
• Upgrade an existing emergency telephone system from a PSTN configuration calls carried out over
connection to GSM data network for high reliability and
low costs
• Reliably configure, update and monitor connected devices remotely
• Gather and stream data from a lift controller via the cellular network ++ Machine room or lift controller
mounted
All programming for the system is either carried out remotely from the Avire
Hub or at the main unit in the machine room or control cabinet. ++ Supports up to eight separate Digital
Audio Units or PSTN Telephones
Digital Audio Units (DAU) in the lift cars and/or pits connect to the DCP over a
++ CAN and RS-232 or RS-422/485
4 wire CAN Bus system.
connections for lift controller
All technical and configuration calls are sent over the data channel of ++ Signal strength indicator
the cellular network, reducing voice call costs and significantly improving
reliability.
It is recommended that the DCP is used with Digital Communication System accessories but is
also backwards compatible with the full range of Memco telephone products.
DCP Specifications
Parameter Value
Power Supply 220 - 240 VAC
Consumption 1.8 to 10 VA
Internal Battery 12V, 600 mAh, 9 hr
Connections CAN, RJ-11, RS-232 or RS-422/485
Networks 2G or 3G
Op. Temp. -10 to +65 oC
Reliable and Cost Effective Connectivity Made Simple Remote Monitoring
Dimensions 210 x 110 x 65 mm All transmission between the All modules within the digital audio The serial interface (RS232 or RS223/
gateway unit and the outside world system are connected via a four- RS485) and CAN Bus connections
is carried over the mobile data wire CAN Bus. This plug-and-play on the DCP allow for machine to
DCP Part Numbers network unless an entrapment voice setup makes initial installation quick machine (M2M) communication with
Part Description call is placed. This minimises ongoing and easy, and enables lift engineers lift controllers and connection to
call costs to the installation owner, to quickly connect sensors, displays, sensors within the lift installation to
MC-2CM10-100-F-20-000 Digital Communication Platform - GSM/GPRS/2G/RS-232
improves the reliability of telemetry and additional modules to the retrieve data on system performance
MC-2CM10-100-F-40-000 Digital Communication Platform - GSM/GPRS/2G/RS-422/485 and remote updates, and enables system as required. All voice and data and status.
MC-3CM10-100-F-20-000 Digital Communication Platform - GSM/GPRS/3G/RS-232 instant communication with cloud communication takes place over two
MC-3CM10-100-F-40-000 Digital Communication Platform - GSM/GPRS/3G/RS-422/485 monitoring systems. wires, with power provided locally
or via the remaining two wires in the
CAN Bus.
4 5
Digital Communication System
Compact audio module for pit of lift shaft remote alarm point.
Key Features
++Amplifier component connected to DAU with input for three antenna types –
6 7
DRIVING INSIGHTS FROM
Digital Communication System
MONITORING CONFIGURATION
DCP
EN81-28
compliant Remote
Remote
monitoring firmware
configuration
of emergency updates
telephones
Provides the
interface to receive
updates from all Lift
Triphony Unit monitoring Configure
connected devices Avire
using Avire
to remotely monitor sensors
sensors
lift status and, in
the future, provide
Digital Audio Unit
data for predictive
and preventative
maintenance Monitor Display
Displays layout
MAINTENANCE updates
Implement updates MODE
and new features
to all connected Monitor
light curtain
devices ensuring functionality
you have the latest,
most up-to-date
Triphony Unit
functionality
BENEFITS
On-the-go User access
Accessible from any access to management
web-enabled device view all Avire feature
without the need for connected
extra hardware devices
8
avire-global.com
PSTN Emergency Telephones
The Memco® range of PTSN Emergency telephones is long standing and has been
developed and tailored to fit the lift industry's needs over ten years.
Providing both EN81-28 and EN81-70 compliance, our product ranges include both Top Of
Car (TOC) and Car Operating Panel (COP) mounting options along with all the necessary
accessories such as speakers, inductive loops and our wiring looms; a key accessory for
working with many OEM lifts to save time and hassle.
We understand the need for minimising installation and programming time; therefore our
solutions are easy to install and have a variety of programming options for both on site
and remote programming.
Memcom includes an inbuilt LCD and keypad, together with a simple ‘tick & cross’
programming menu. This provides engineers with an easy-to-use interface; allowing any
PSTN Telephones Gateways EN81-28 Monitoring
errors to be quickly and easily identified and resolved. Avire’s emergency telephones are easy Avire gateways can be used in place Avire telephones place routine calls
to fit and program and provide reliable of landlines and provide a reliable and perform self-checks as required
All Memco emergency telephones can be programmed remotely using a touchtone alarm points for trapped passengers and connection to the outside world. with EN81-28. These calls can be logged
telephone or the Avire Hub. The Memco range also comes with P100 protocol. service engineers. They perform periodic Installation and monthly costs of either at a call centre or using an Avire
self-checks and will place calls to report landlines can be expensive to route monitoring platform giving both the
The Avire Hub is a cloud based platform which allows for monitoring and configuration technical faults and lift usage. to the top of a lift shaft, expensive to installer and the building owner peace of
from any internet capable device. The Avire Hub's intuitive user experience takes the maintain compared to a monthly SIM mind.
hassle out of monitoring devices and staying compliant to industry standards with actions contract, and are often replaced by digital
systems in new buildings. Furthermore,
such as 3 day test calls and technical alerts.
GSM gateways have greater levels of
redundancy than fixed landlines, as they
The Memco range also comes with P100 protocol and GSM options.
are able to switch to a new mobile tower
in the event that signal from one goes
down.
10 11
Telephones
Telephone
to the same phone line
++ Avire Hub – allows easy management microphone units with LED indicators to show call in progress
by a simple two-wire bus. The MPS units, powered and battery of technical alerts and EN81-28 test and call acknowledgement, to premium stainless steel plates
backed by the Memcom+, are both engineer’s intercom points and calls and the ability to remotely
program and re-program installed incorporating pictograms and alarm push buttons.
EN81-28 remote alarm points.
units
Designed to reduce the amount of modification required inside
Memcom can be connected to either a PSTN landline or via a ++ Able to work on VOIP/NGN networks
using a VOIP to analogue convertor, the elevator car, all COP accessories are delivered pre-wired to
DCP acting as a gateway.
or the analogue port on the VOIP increase speed of installation and reduce time spent on site.
master station
450 883-01/T COP Speaker / Microphone Accessory mounted on a Plastic plate, No No N/A No N/A 79x75
with a 10m cable
*Able to work on VOIP/NGN networks using a
450 883-02 COP Speaker / Microphone Accessory mounted on a Plastic plate, No Yes No No N/A 79x75
VOIP to analogue converter, or the analogue with integrated Green and Yellow LED indicators
port on the VOIP master station
450 883-03 COP Speaker / Microphone Accessory mounted on a Plastic plate, No Yes No No N/A 79x75
with integrated Green and Yellow LED indicators and alarm push
**Up to 5 additional MPS stations can be added button
to the system, but each will require its own 24V
power supply 450 250 Stainless steel COP plate accessory with integrated speaker and Yes Yes No No N/A 200x80
microphone
450 200 Stainless steel COP plate accessory with integrated speaker, Yes Yes No No N/A 200x80
microphone, Call Waiting and Call Acknowledged pictograms
450 210 Stainless steel COP plate accessory with integrated speaker, Yes Yes Yes Yes Yes 200x80
microphone, Dual illuminated Alarm push button and Call
Acknowledged pictogram
450 340 Stainless steel COP plate accessory with integrated speaker, Yes Yes No Yes No 188x90
microphone, Dual illuminated Alarm push button and Call
Acknowledged pictogram with EN81-71 compliance
450 260 COP surface mount speaker / microphone acccessory Yes No N/A No N/A 139x89x25
450 270 COP surface mount speaker / microphone acccessory with Yes Yes No No N/A 139x89x25
integrated pictograms
450 280 COP surface mount speaker / microphone acccessory with Yes Yes No Yes No 139x89x25
integrated pictograms and alarm button
450 290 COP surface mount speaker / microphone acccessory with Yes Yes No Yes No 139x89x25
integrated pictograms, alarm button and inductive loop
For more information, download our product
datasheet at https://www.avire-global.com
12 13
Telephones
Memcom Accessories
Memcom Accessories
System
Product Description Part No.
450 887-01
Product Description
The Memcom Multi Point Station (MPS) provides external emergency telephone points 492 021 Memcom Multi Point Station (MPS) 450 887-02 Wiring Loom compatible with Thyssenkrupp Galaxy,
for the elevator engineer in the shaft, pit or machine room. This easy-to-install unit Synergy and Ysis
451 000 Inductive loop
allows local communication between different points of the elevator installation, 450 887-03 Wiring Loom compatible with Schindler Smart Lifts
Pictogram
a considerable benefit during commissioning and installation of the elevator. 450 887-04 Wiring Loom compatible with KONE KRM
494 051 US 91 green jewel 30mm round pictogram
450 887-06 Wiring Loom compatible with Sodimas
Using a 2-wire connection, up to 3 MPS units can be wired in parallel back to the 494 053 US 91 yellow jewel 30mm round pictogram
450 887-07 Wiring Loom compatible with Otis REM6
Memcom. The system is fully supported by the Memcom integral battery, but can be Spares & Accessores
boosted using 24VDC. 450 880-02 Wiring Loom compatible with Orona ARCA2
450 881 In-car instruction plate. Sticky back
450 880-03 Wiring Loom compatible with Orona ARCA3
491 003-003 BT male plug with 3m cable to loose end
Key Features 450 880-08 Wiring Loom compatible with Orona ARCA3(GERMANY)
450 880-06 Switch spur with cable
+ Universal use - pit, machine room, cabin roof or under the cabin
450 880-04 Spare battery for Memcom
+ 2-wire system and screwless connectors for easy installation
450 882-02 Adaptor for BT line
+ Allows local communication between different MPS points assisting in elevator
installation 450 300 Top of Car enclosure
+ Adjustable volume and status LED 494 020 Inductive loop test meter
+ Allows compliance to EN81-28 and EN81-70 494 054 Alarm push button- 30mm round, 12V, dual illuminate
Key Features
+ Necessary to meet EN81-70
+ Fully compatible with existing emergency telephone installations
Memcom MPS
+ Quick and easy to install
+ High-quality sound
+ Battery back-up (through Memcom unit)
DCP
Key Features
+ Pre-wired into the Memcom terminal block
Memcom Elevator
+ Labelled connections for every connection required on the lift Emergency Telephone
+ Integrated relays where required
+ Reduce installation complexity
+ Allow the existing pictograms and alarm push button to be utilised
+ Speed up installation Surface Mount
COP Accessory
+ Reduce the risk of wiring errors
Memcom MPS
14 15
Introduction to Light Curtains
Avire has supplied light curtains to the elevator market for over 30 years and has always been at the leading
edge of the industry. More than two million Avire light curtains have reached customers ranging from global
elevator manufacturers to local, independent installers. All Avire products are designed with absolute
customer safety in mind.
All Memco light curtains are manufactured at our ISO accredited factory in the EU. They are built for quick
installation, enhanced durability and maximum safety, whether installing in a factory or in the field.
Memco light curtains are fully compliant to EN81-20 and we offer a range of protection features to suit
different customer needs. These features include 2D or 3D detection, a range of different profile designs and
the option to incorporate visible light indicators to highlight door movement.
17
Detectors
Panachrome +
Key Features
Part
No.
G3510 000
Product
Description
Set of Panachrome+ 3D
Light Curtains
Height
2000mm
Profile
Ultraslim
10mm
No. of
Diodes
48
No. of
Beams
234
Max.
Range
6m 2D Range
3D - half-door separation
Light
immunity
>100,000 lux
IP
Rating
IP65
Operating
Temp.
-10°C to +65°C
EMC
Compliance
Emissions to EN 12015:2014;
Immunity to EN12016:2013
(up to 1.2m from doorway)
A true innovation in elevator door safeguarding, Memco® ++ EN81-20 & EN81-70 compliant G3540 000 Set of Panachrome+ 3D 2005mm Standard 48 234 6m 2D Range >100,000 lux IP65 -10°C to +65°C Emissions to EN 12015:2014;
Panachrome+ provides the elevator industry with a revolutionary ++ Red and green indicators
Light Curtains 43mm 3D - half-door separation Immunity to EN12016:2013
(up to 1.2m from doorway)
detection system for maximum safety. This unique solution has highlight door movement
which can reduce door damage G2510 000 Set of Panachrome 2D 2000mm Ultraslim 48 234 6m 2D Range >100,000 lux IP65 -10°C to +65°C Emissions to EN 12015:2014;
red and green indicators which operate on door movement to Light Curtains 10mm Immunity to EN12016:2013
visually show the opening and closing of the doors. ++ 2D and 3D detector models available
G2540 000 Set of Panachrome 2D 2005mm Standard 48 234 6m 2D Range >100,000 lux IP65 -10°C to +65°C Emissions to EN 12015:2014;
++ Dense 234 infrared Light Curtains 43mm Immunity to EN12016:2013
Installations using Panachrome+ or 3D detection often result in a beam pattern
reduction in door damage and this means less downtime. ++ 4m pluggable extension cable
and have been shown to significantly reduce door damage. 43mm profile
Panachrome+ Accessories (included with light curtains) Previous version Spare Parts
Part No. Product Description Part No. Product Description
015 455 Panachrome 4m extension cable C3510 000 Set of Panachrome 3D Light Curtains (10mm profile)
091 360 Flat fixing bracket for leading edge/slampost mounting with self-tapping screws C3540 000 Set of Panachrome 3D Light Curtains (43mm profile)
091 365 L Fixing bracket
C2510 000 Set of Panachrome 2D Light Curtains (10mm profile)
18 19
Light Curtains
Pana40 Plus
Product No. of Pana40+ Pana194 Cables Power Operating EMC
Part No. Description Beams Scan Time Scan Time Supplies Dimensions Consumption Voltage Timeout Temp Compliance
202mm x
Pana40 Plus 2D 45ms 2 x 4m 5VA max. with light
841 000 40 - 186mm x 110/240VAC
Controller (40 beams) ext. cables curtains fitted
52mm
202mm x
Pana40 Plus2D 200ms 2 x 4m 5VA max. with light
Pana40 Plus is one of the most established products within the 841 012
Controller
194 -
(194 beams) ext. cables
186mm x
curtains fitted
110/240VAC
52mm
Memco® range and is renowned for being an exceptionally high
202mm x
quality, reliable solution. Pana40 Plus has 40 diodes making it 841 008
Pana40 Plus 3D
Controller
40
45ms
(40 beams)
-
2 x 4m
ext. cables
186mm x
5VA max. with light
curtains fitted
110/240VAC
Emissions to
52mm Switched ON/
compliant to the EN81-20 standards. OFF 10-70 -10°C to 65°C
EN12015:2004;
770 040 Set of Pana40 Plus Light Curtains 3D 2100mm 43mm 40 or 194
Universal Fixing Emissions to
depending
6m -10°C to EN12015:2004;
771 000 Set of Pana40 Plus Light Curtains 3D 2000mm 15mm 40 on
controller
100,000 lux IP54
65°C Immunity to Pana40Plus Accessories
Slimline EN12016:2004
used
774 000 Set of Pana40 Plus Light Curtains 3D 2000mm 9mm Part No. Product Description Part No. Product Description
5m
Ultraslim
007 035 Sightguard 40mm wide 2.1m high for Slimline & Ultraslim 2D 015 199 P40+ 4m extension cable
745 xxx Set of Pana40 Plus 2-in-1 Light 2D 2115mm 20mm
Curtains 007 045 Sightguard 46mm wide 2.1m high for Slimline & Ultraslim 2D 616 800-010 Static fixing kit c/w fixing screws (Ultraslim only)
1900mm 6m
25mm 007 065 Sightguard 30mm wide 2.1m high for Slimline & Ultraslim 2D 743 803 Ultraslim clamp plate kit (per light curtain)
2115mm
007 137 Right hand finger guard 16mm wide 2.1mm high for 771 Slimline 3D 741 800-002 Slimline clamp plate (per light curtain)
755 xxx Set of Pana40 Plus 2-in-1 2D 2070mm
Light Curtains 20mm 6m 007 138 Left hand finger guard 16mm wide 2.1mm high for 771 Slimline 3D 001 888 Igus chain 0.8m (for use with extension cables)
2270mm
001 889 Igus chain 1.2m (for use with extension cables)
775 xxx Set of Pana40 Plus 3-in-1 3D 2110mm 20mm
Light Curtains
2130mm 22mm 5m
2100mm 25mm
22
Contacts
Office Locations
France Malaysia UK
ZAC des Portes de l’Oise Suite 39, 15-1, Menara 1 Mont Kiara Unit 1, The Switchback
9 Bis Rue Léonard de Vinci No. 1, Jalan Kiara, Mont Kiara Gardner Road
60230 Chambly 50480 Kuala Lumpur Maidenhead
France Malaysia Berks SL6 7RJ
T: +33 (1) 30 28 95 39 T: +603 7493 5152 T: +44 (0) 1628 540 100
F: +33 (1) 30 28 24 66 F: +603 7493 5901 F: +44 (0) 1628 621 947
http://www.avire-global.com/contact-us/