You are on page 1of 58

Bill of Quantities

1 Provisional Sum
Procument Item Details
SL.
No Item Description Unit Quantity
1 Preparation of as built Architetectural, Structure, Sanitary & PS 1.0
2 Electrical drawing
(a) Insurance as per
premium forinstruction
the work, all complete.
plant and materials damage PS 1.0
3 for contract work for all risk including Riot, Strike, material
Carrying out diferrent laboratory tests of construction PS 1.0
like cement, rod, bricks, sand, aggregate, filling materials,
2 Construction work
Procument Item Details
SL. Bidder's Rate
No Item Description Unit Quantity (NPR)
Provide, erect and maintain project
site notice boards (plane CGI sheet of
1mx1m mount with 1/2" black sq black iron
1 pipe.on its back with 2 number of 1.5" sq ls 1.0
pipe post of 2 m above GL) as per insruction
of Site engineer and specification all
complete.

2 Site clearance work including collection of sq.m. 1343.81


all construction debris, water, removal of
bushes, tree and disposal to the designated
place as
directed by Engineer.
Earth Work in Excavation in
foundation (soft-clay & silty soil) for lift up
to1.5 m. including timbering, pumping out
water from the foundation trench, stacking
the soil
0.90 m. minimum from the edge of
foundation, filling the excavated clean &
3 grub of soil in foundation trench & cum. 745.29
disposing the excess soil upto a lead of
10.00 m as per instruction & specification
complete work (Machine 70%)

Procument Item Details

SL. Bidder's Rate


No Item Description Unit Quantity (NPR)
Earth Work in Excavation in
foundation (soft-clay & silty soil) for lift up
to1.5 m. including timbering, pumping out
water from the foundation trench, stacking
the soil
0.90 m. minimum from the edge of
4 foundation, filling the excavated clean & cum. 319.41
grub of soil in foundation trench &
disposing the excess soil upto a lead of
10.00 m as per instruction & specification
complete work (Manual 30% )

5 Earth Back Filling in foundation trenches in cum. 517.96


15 c.m. layers with water sprinking &
manual compaction as per speciication and
instruction all
complete.
Sand filling work with watering & proper
6 manual compaction. cum 18.13

Earth Back Filling in plinth in 15 cm


layers with water sprinking & manual
7 compaction as per speciication and Cum 443.05
instruction all complete.

Stone Soling in foundation trench,


8 finishing to approved level, line and cum 226.24
dimensions as per instruction &
specification all complete work.
Providing & laying machine made brick
masonary in 1:4 C/S mortar in substructure
and ground floor in perfect line level finish
including wetting the stones, racking the
9 joints and curing the work for at least 7 days cu.m. 91.25
as per specification, drawings &
instructions of the site engineer all
complete.

Providing & laying 1st class machine made


brickwork in 1:4 C/S mortar in
superstructure in ground floor in perfect
line level finish including wetting the bricks,
10 racking the joints and curing the work for at Cum. 309.38
least 7 days as per specification, drawings &
instructions of the site engineer all
complete.

Providing and Laying Plain Cement


Concrete ( P.C.C.) in 1:3:6 in foundation
with cement, sand and aggregate including
mixing, laying, finishing to approved level,
11 Cum 61.71
line and dimensions and curing all complete
as per specification and instruction of site
Engineer.
Providing and Laying Plain Cement
Concrete ( P.C.C.) in 1:2:4 in floor with
cement, sand and aggregate including
mixing, laying, finishing to approved level,
12 Cu.m. 72.92
line and dimensions and curing all complete
as per specification and instruction of site
Engineer.

Providing and Laying P.C.C.(1:1.5:3) M20


for R.C.C.work in foundation, columns,
beams, slabs, lintels etc. with cement, sand,
and Aggregate( stone ballast or Crushed )
38mm gauge including mixing with concrete
13 mixture, compacting the concrete with Cum 799.21
vibrator machine, laying, finishing to
approved level ,lines and dimensions and
curing all complete as per
instruction of site Engineer.

Providing Reinforcement bars (Grade 500)


work including straightening, cleaning,
cutting, bending, binding with 20 SWG
annealed wire & fixing in position as per
drawing, bar bending schedule for raft
14 foundation column, beam, wall, stair, slab in Kgs 118777.14
all
R.C.C. works as per specification, drawing
& instruction of site engineer. Approved
brands: Himal, Panchakanya or equivalent.

15 Supplying,making and fixing 12x12mm sq. sq.m. 132.84


solid pipe M.S. grill with 4.5x20mm iron
plate boarder grill with Red oxide paints as
per
design and instruction all complete.
16 Supply & fixing StainLess Steel railing of 4 rm 7.41
rows(50 mm at top and 25 mm at other Raw,
50 mm Vertical post@ 2 m ,0.75m-1 m
height ) as per
inst of site engineer.
MS Spiral Stair case with 4" medium
17 post,3x20mm sheet,32mm handrail as Kg 250.0
complete as per site instruction.
Stainless Steel Railing for Verandah
(S.S.Pipe) Fabrication & installation (50mm
dia. Hand rail, 40mm dia.
18 Vertical post,20mm dia.Bracing 1 lines) 30 rm 40.0
cm height good finishing including fixing as
per speciication and instruction complete
work
Formwork, shuttering, centering with 19mm
thick waterproof ply for beam with steel
pipe propping, scaffolding, staging,
19 supporting inclusive of wedging and cutting Sqm 844.41
holes for utilization till the support if fully
unyielding nett.
Formwork, shuttering, centering with 19mm
thick waterproof ply for column, necessary
propping, scaffolding, staging, supporting
20 inclusive of wedging and cutting holes for Sqm 777.86
utilization till the support if fully
unyielding nett.

Formwork, shuttering, centering with


19mm thick waterproof ply board for slab
and other and steel post for all works
necessary propping, scaffolding, staging,
21 Sqm 1102.87
supporting inclusive of wedging and cutting
holes for utilization till the support if fully
unyielding nett.

22 Supplying and fitting Aluminium sliding sqm 132.84


window and partition with Ventilator from
section (101 x45x1. 50)mm in perfect line
level all
complete as specified by site engineer
23 Supplying and fitting Aluminium sliding sqm 182.7
door and window and partition with
Ventilator from section (101 x45x1.50)mm
in perfect line level all
complete as specified by site engineer
24 12.50 mm. thick Cement sand plaster (1:4) sq.m. 7154.11
on wall surface of good finish including
racking the joints, wetting the surface and
curing the work all
complete
25 12.50 mm. thick Cement sand plaster (1:3) sq.m. 1381.12
on ceiling surface of good finish including
racking the joints, wetting the surface and
curing the work all
complete
Providing & applying 2mm thick wall
putty work on wall, ceiling, column, beam
in all surfaces of the buildings etc including
cost all materials and accessories,all
26 Sqm. 7512.22
complete as per specification, drawings and
instruction of engineer.(J.K. White putty,
Birla or equivalent).

Providing and Laying glazed/ non


glazed porcelain tiles on walls and floor of
approved colored laid with cement sand
27 sq.m. 1067.72
mortar (1:4) finished with cement slurry all
complete as per site instruction of Engineer.

Providing and Laying of 16mm


marbles (300mm x 300mm) on Stair of
approved colored laid with cement sand
28 sq.m. 21.8
mortar (1:2) finished with cement slurry all
complete as per site instruction of Engineer.

supplying and Laying 500 gauge


29 polyethe sheet below the soling in perfect Sq.m. 226.24
line level all complete as per site instruction
of Engineer.
Two component polymer modified
30 elastomeric waterproof coating system Sq.m. 1381.12
BRUSHBOND RFX or equivalent (2 coat
application)
31 Providing, fixing and installation of rm 13.45
Expansion Joint for Horizontal Slab Area
with 3 to 5 mm different Aluminium Plates
with Joint Gap upto
4"
50 mm th. Plain Cement Concrete ( 1:
32 2:4) Screeding for flooring all complete as sq.m 796.2
per speciications and instruction.

38 mm th. Plain Cement Concrete ( 1:


33 2:4) Screeding for flooring all complete as sq.m. 176.56
per speciications and instruction.

supplying and fixing 600mm x


34 600mm square false celing works with all Sq.m. 1381.12
accessories complete in perfect line level as
specifierd by site engineer
35 Supplying and painting two coat of ready Sqm. 132.84
made aluminium paint of approved quality
with one coat of metal primer painting over
porperly
cleaned surface all complete.
Supplying and painting two coat of
ready made palstic emulsion paint of
approved quality and colour on inner part of
36 Sqm. 6489.22
building with one coat of primer painting
over porperly cleaned surface all complete.

Coloring with 2 coats of weathercoat


paint (Apex or eqvt.) approved color over
one coat primer to give uniform coloring
37 Sqm. 1023.01
after rendering the surface clean and moist
as per specification and instruction all
complete work
38 Fitting and fixing Temporary fencing for Sq.m. 569.45
Protection work by using C.G.I. sheet with
necessary Iron posts in the construction area
and the path as per
Instruction.
Plantation of 4 feet height ornamental trees
as specified by site engineer and protection
work with 3x20mm iron strip and 2"X2"
39 Mesh and dia of 45cm as per design, Nos 28.0
drawing, specification and satisfaction of
site engineer all
complete.
Providing and laying Carpet dubo
40 (German Greean Lawn) as per Sq.m. 407.5
specification,instruction and drawing all
complete.
41 Plantation of Tree/ Flower/ Shrubs/ etc nos 20.0
(Ashok tree 4ft )type suitable for Hospital
supply, laying and watering as per site
condition,specification &
instruction of site engineer
Supplying, spreading, levelling,
42 compaction, watering sand mix gravelling cum 149.75
work as per specification & instruction of
site engineer
Supplying Fixing of readymade
machine made factory production
Hexagonal Interlock Pavers Blended Color
with compressive strength M35 or above.
(Specification: Thickness: 40mm ,
43 Sq.m. 998.35
Tolerance/others:±1mm Variance in
thickness, Proper Interlock Grooves &
Pigment Color, Water absorption <6%))
with stone dust all complete.

Supplying Fixing of readymade


machine made factory production Half
batterd Kerbstone Grey Color with
compressive strength M 15. (Specification:
44 Rm 404.97
Thickness: 200mm,
Dimension:200*350*300, Tolerance/others:
±1.5 mm Variance in height)

Supplying, fabrication, installation,


erection Plain compound gate (30 kg/m2)
made with MS stirips fitted in 50x50mm
MS angle, in perfect measurement with one
45 sq.m. 17.15
Coat red-oxide primer all complete as per
drawing, specifications & instructions by
site engineer.

46 Fixtures: set 14.0


Water Closet set: White glazed porcelain
clay EWC Constellation commode with 'P '
& 's ' trap and seat cover complete set.

Indian Pan set: Supplying and Fixing White


glazed earthenware Indian pattern Orissa
Pan with low level Pvc flushing
47 cistern ,trap,pipe connector with complete set 3.0
accessories including bracket, flushing
pipe,pipe connector
etc. all complete set.
Urinal set: providing and fixing all
complete as per Drawing, Specification and
instruction of Consultant and ready for
48 set 2.0
operation. 61x41x38 cm Large Flat back
White glazed urinal with bracket.

Porcelain clay white glaze 68X30cm size


49 Urinal partation all complete set . set 1.0

Wash Basin Set: (50x40)cm Porcelain clay


50 white glaze Oval Wash basin with mixture set 28.0
complete set.
Shower Set: Shower head with arm and
51 flange set 5.0
Providing and fixing s.s. wall mixer with
52 shower and bath faucet conceal type as per set 5.0
instruction all complete.
Sink stainless steel 304 grade Stainless steel
53 sink Bowl with ordinary drain board set 2.0
including Sink cock.
Fittings, Valves and Bathroom
54 accessories15mm dia Angle valve with wall set 79.0
flange Grohe, Schell or equivalent.

15 mm S.S. water spray with 1.2mt. Long


55 flexiable pipe Grohe, Schell or equivalent. set 14.0

S.S. Bibcock 15mm dia with wall flange


56 Grohe, Schell or equivalent. set 16.0

Looking Mirror Modi guard or equivalent


57 including frame all complete set. set 16.0

Toilet paper holder flap type(cover type)


58 Grohe, Schell ir equivalent. set 17.0

Soap Despenser with holder Grohe, Schell


59 or equivalent. set 28.0

Stainless Steel 15mm dia x450mm long


60 towel rod heavy of Grohe,Schell or set 22.0
equivalent.
European pattern C,P. 90 cm long with bend
61 type Grab Bar of Grohe, Schell or set 17.0
equivalent.
Hand drayer with complete accessories
62 set 2.0

Floor Drain Set: providing and fixing all


complete as per Drawing, Specification and
instruction of Consultant and ready for
63 operation. Floor Drain set: consisting of set 47.0
uPVC multi port
floor trap.

S.S. Grating 110mm Grohe, Viega or


64 equivalent. set 47.0

110 mm upvc gully trap of NS with CI


65 grating all complete. set 6.0

Water storage tank: providing and


fixing all complete as per Drawing,
Specification and instruction of Engineer
and ready for operation. Over head
66 set 2.0
storage:2000 liter stainless steel water tank
304 grade steel with Inlet, outlet, over flow,
cleanout hole etc.
Water Pumping Set: providing and
fixing all complete as per Drawing,
Specification and instruction of Engineer
and ready for operation. 1.5 HP electric
67 set 1.0
motor pump multistage couple of crompton
as per specification and instruction all
complete.

Pressure sensor switch for pump auto switch


68 off all complete set. set 1.0

Pipe line inside and outside


buildingSupplying and fixing CPVC:-
Chlorinated Poly Vinyl Chloride pipe (hot
and cold). or equivalent with CPVC
fittings/ specials (Tees, elbows, Unions etc)
clamps(m.s plate with nut and bolt with
hexagonal screws for clamp in ceiling,wall),
nails, including jointing materials,
69 installation of pipes and specials including rm 102.3
making holes on walls or floor and repairing
the same to its original finish, all complete
set as per Drawing, Specification and
instruction of Consultant and ready for
operation. 25 mm dia CPVC Pipe SDR 11
CTS,
28.1 kg/cm2

50 mm dia CPVC Pipe SDR 11 CTS,


70 28.1 kg/cm2 rm 33.2

20 mm dia CPVC Pipe SDR 11 CTS,


71 28.1 kg/cm2 rm 341.36

Valves: providing and fixing all


complete as per Drawing, Specification and
instruction of Engineer and ready for
72 set 5.0
operation. 25 mm dia CPVC Ball Valve,
CTS Socket all complete.

50 mm dia CPVC Ball Valve, CTS Socket


73 all complete. set 4.0

Rain water pipe line of NS testing the


pipe line by the smokig test rectifying the
leakage if any, all complete as per the
74 rm 19.8
specification and instruction all completeOD
110mm (6.0 kgf/ sq cm) uPVC/PVC

75 OD 160mm (4.0 kgf/ sq cm) HDPE rm 123.7


Soil Waste pipe line ( from toilets to
the duct then to the nearest manhole) :
Supplying and fixing including all necessary
bend, tee, y branch, socket etc as per
requirement , Specification and instruction
of Engineer and ready for operation. Soil
76 Waste pipe line of NS testing the pipe line rm 63.86
by the smokig test rectifying the leakage if
any, all complete as per the specification and
instruction all complete. OD 110mm (6.0
kgf/ sq cm) uPVC/PVC

77 OD 200mm (4.0 kgf/ sq cm) HDPE rm 138.5

Waste water pipe line of NS testing


the pipe line by the smokig test rectifying
the leakage if any, all complete as per the
78 rm 65.3
specification and instruction all complete.
OD 75mm (6.0 kgf/ sq cm) uPVC/PVC

79 OD 200mm (4.0 kgf/ sq cm) HDPE rm 158.5

Manhole cover: providing and fixing


manhole cover as per Drawing,
Specification and instruction of Consultant
80 set 51.0
and ready for operation. CI cover 55x55 cm
size with locking arrangements round type
( medium).
Water Treatment filter system
Supplying and fitting water filter system
consisting of Oxidation chamber (Iron
removal filter), Dual Media Filter, Activated
Carbon Filter, Chemical Electronic Dosing
Pump ( Sodium
Hypochloride/Polyelectrolyte), Chemical
Dosing Tank with LID, Filter Feed Pump,
Softener Feed Pump including
81 interconnecting pipings, valves, strainers set 1.0
pipings and fittings erection, installation,
testing and commissioning all complete
providing and fixing manhole cover as per
Drawing, Specification and
instruction of Consultant and ready for
operation.
Soak PitConstruction of 10 cum soak
pit of size 2500 mm clear diameter, 2000
mm clear liquid height, 1050 mm free
board; including earth work excavation,
750mm thick brick wall in 1:4 cement
mortar, 1200mm thick
82 R.C.C. slab cover , filling pit with graded set 1.0
washed stone gravel, filling gap between
wall and ground with coarse sand, etc., all
complete as per drawings, specification and
instructions.

ManholeConstruction of brick
masonry Sewer manhole of size
800*800*800 mm with 230mm thick brick
masonry in 1:4 cement mortar, including
83 set 51.0
punning in 1:1 cement sand with work all
complete as per instruction of Engineer and
Specification.

Septic TankConstruction of septic


tank of capacity 12 cubic meter including
earth work excavation, brick soling with pcc
up to depth of 75mm accompained by
84 set 1.0
150mm thick RCC works in slab and wall
(1:2:4) etc and work all complete as per
instruction of Engineer and Specification.

Supply, Installation, Testing &


Commissioning of Distribution board 12
way TPN made of mild steel sheet Double
cover push lock Nepal made flush type
suitable size two coat red oxide & two coat
enamel paint 14/16 guage sheet etc all
complete,
40 Amp TPN MCB -1,
25A to 40A, (30mA,100,300mA) FP RCCB
85 -1, Set 2.0
6-16 Amp SP MCB-33,
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.
Supply, Installation, Testing &
Commissioning of Distribution board 8 way
TPN made of mild steel sheet Double cover
push lock Nepal made flush type suitable
size two coat red oxide & two coat enamel
paint 14/16 guage sheet etc all complete,
32 Amp TPN MCB -1,
25A to 40A, (30mA,100,300mA) FP RCCB
-1,
86 6-16 Amp SP MCB-24, Set 1.0
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.

Supply, Installation, Testing &


Commissioning of Distribution board 8 way
TPN made of mild steel sheet Double cover
push lock Nepal made flush type suitable
size two coat red oxide & two coat enamel
paint 14/16 guage sheet etc all complete,
20 Amp TPN MCB -1,
25A to 40A, (30mA,100,300mA) FP RCCB
-1,
87 6-16 Amp SP MCB-21, Set 1.0
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.

Supply, Installation, Testing &


Commissioning of Distribution board 6 way
TPN for Lift made of mild steel sheet
Double cover push lock Nepal made flush
type suitable size two coat red oxide & two
coat enamel paint 14/16 guage sheet etc all
complete,
32 Amp TP MCCB -1,
88 25A to 40A, (30mA,100,300mA) FP RCCB Set 1.0
-1,
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.
Supply, Installation, Testing &
Commissioning of Distribution board 6 way
TPN for Lift made of mild steel sheet
Double cover push lock Nepal made flush
type suitable size two coat red oxide & two
coat enamel paint 14/16 guage sheet etc all
complete,
32 Amp TP MCCB -1,
89 25A to 40A, (30mA,100,300mA) FP RCCB Set 1.0
-1,
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.

Design,fabrication,assembling,supply,
installation and commissioning of Cable
Trench of size W 12''x D 2'' made out of
Galvanised Steel with Strong support
90 Rm 12.0
System.Make:-Legrand Cablofil or Eqvt
with all necessary accessories; screws,
gripes, nut bolt, clamp etc all complete.

Design,fabrication,assembling,supply,
installation and commissioning of 6'' HDPE
polythene pipe with necessary junction (12
no of T joint) for Cable supply to DBs from
91 Rm 25.0
MDB via electrical duct with all necessary
accessories; screws, gripes, nut bolt, clamp
etc all complete.

Supply, Installation, Testing &


Commissioning of ceiling mounted LED
Panel Light(Slim) 2'x2' 38W 4000K/6500K,
92 Set 44.0
Himstar or equivalent, with screws, gripes,
pvc tape, box etc all complete.

Supply, Installation, Testing &


Commissioning of ceiling mounted LED
Downlight Round/Square 18W
93 3000k/6500k, Philips, wipro, Crompton, Set 99.0
HPL or equivalent, with screws, gripes, pvc
tape, box etc all
complete.
Supply, Installation, Testing &
Commissioning of ceiling mounted LED
Downlight Round/Square 12W 3000k/6500k
94 , Philips, wipro, Crompton, HPL or Set 56.0
equivalent, with screws, gripes, pvc tape,
box etc all
complete.
Supply, Installation, Testing &
Commissioning of ceiling mounted circular
type 6W LED panel light , Philips, wipro,
95 Set 24.0
Crompton, HPL or equivalent, with screws,
gripes, pvc tape, box etc all complete.
Supply, Installation, Testing &
Commissioning of 9/11W Mini mirror light
with electronic balast, Philips, wipro,
96 Set 14.0
Crompton, HPL or equivalent, with screws,
gripes, pvc tape, box etc all complete.

97 Supply, Installation, Testing & Set 39.0


Commissioning of 48'' Ceiling Fan Bajaj or
eqv. with all necessary accessories: screws,
gripes, box etc all
complete.
98 Supply, Installation, Testing & Set 21.0
Commissioning of 12'' Exhaust Fan Bajaj or
eqv. with all necessary accessories: screws,
gripes, box etc all
complete.
Supply, Installation, Testing &
Commissioning of 15 Amps combined
Single modular socket flush type Dyna,CPL,
99 Set 156.0
HPL or eqvt. with 3''*3'' box with all
necessary accessories: screws, gripes, box
etc all complete.
Supply, Installation, Testing &
Commissioning of 1 gang 1 way switch;
Dyna, CPL, HPL or eqvt. with 4''*6'' box
100 Set 11.0
with all necessary accessories: screws,
gripes, box etc all complete.

Supply, Installation, Testing &


Commissioning of 2 gang 1 way switch;
Dyna, CPL, HPL or eqvt. with 4''*6'' box
101 Set 12.0
with all necessary accessories: screws,
gripes, box etc all complete.

Supply, Installation, Testing &


Commissioning of 3 gang 1 way switch;
Dyna, CPL, HPL or eqvt. with 4''*6'' box
102 Set 26.0
with all necessary accessories: screws,
gripes, box etc all complete.

Supply, Installation, Testing &


Commissioning of 4 gang 1 way switch
Dyna, CPL, HPL or eqvt. with 4''*6'' box
103 Set 7.0
with all necessary accessories: screws,
gripes, box etc all complete.

Supply, Installation, Testing &


Commissioning of 5 gang 1 way switch
Dyna, CPL, HPL or eqvt. with 4''*6'' box etc
104 Set 4.0
with all necessary accessories: screws,
gripes, box etc all complete.

Supply, Installation, Testing &


Commissioning of 6 gang 1 way switch
with; Dyna, CPL, HPL or eqvt. with 4''*6''
105 Set 22.0
box with all necessary accessories: screws,
gripes, box etc all complete.
106 Supply, Installation, Testing & Set 49.0
Commissioning of Dimmer Single 400 Watt
F BAJAJ or eqvt. with 4''*6'' box with all
necessary accessories: screws,
gripes, box etc all complete.
107 Supply, Installation, Testing & Set 25.0
Commissioning of metal junction box;
Dyna, CPL, HPL or eqvt. with all necessary
accessories: screws, gripes,
box etc all complete.
Supply, Installation, Testing &
Commissioning of 2x2.50 sq mm multi
strand flexible cu.wire NS marked or
equivalent for light & fan point in 25mm
108 HDPE polythene pipe/listy with all Point 297.0
necessary accessories: screws, clamps, pvc
tape,
grips, flexible wire (10m per points) etc all
complete.
Supply, Installation, Testing &
Commissioning of 2x4.0+1x1.50 sq. mm
multi strand flexible cu wire NS marked or
equivalent for power point in 20mm HDPE
109 Point 156.0
polythene pipe/listy with all necessary
accessories: screws, clamps, pvc tape, grips,
flexible wire (10m per points) etc all
complete.
Supply, Installation, Testing &
Commissioning of 4 core 16 sq.mm
unarmoured copper PVC/XLPE cable NS
marked or equivalent for supply to Fire
110 Fighting DB,X Ray DB and so on from Rm 25.0
Main Panel. (APPROX..) with all necessary
accessories: screws,
clamps, pvc tape, grips, flexible wire (10m
per points) etc all complete.
Supply, Installation, Testing &
Commissioning of 2 core 6 sq.mm
unarmoured copper PVC/XLPE cable NS
marked or equivalent for supply to Outdoor
Light DB, Water Pump DB and so on from
111 Rm 20.0
Main Panel. (APPROX..) with all necessary
accessories: screws, clamps, pvc tape, grips,
flexible wire (10m per points) etc all
complete.

Supply, Installation, Testing &


Commissioning of 4 core 10 sq.mm
unarmoured copper PVC/XLPE cable NS
marked or equivalent for supply to Floor
112 Sub-DBs from Floor Panel Board. Rm 50.0
(APPROX..) with all necessary accessories:
screws, clamps,
pvc tape, grips, flexible wire (10m per
points) etc all complete.
Supply, Installation, Testing &
Commissioning of 4 core 6 sq.mm
unarmoured copper PVC/XLPE cable NS
marked or equivalent for supply to Floor
113 Sub-DBs from Floor Panel Board. Rm 15.0
(APPROX..) with all necessary accessories:
screws, clamps,
pvc tape, grips, flexible wire (10m per
points) etc all complete.
Supply, Installation, Testing &
Commissioning of 8/10 SWG cu cable NS
marked or equivalent for earth continuity
from main distribution board (MDB) to DBs
114 Rm 65.0
with all necessary accessories: screws,
clamps, pvc tape, grips, flexible wire (10m
per points) etc all complete.

Supply, delivery, installation, testing and


commissioning of the computer sockets
with all required accessories including
necessary connecting, fixing, insulating and
jointing materials and redoing the chiselled
115 areas with cement and sand mortar as per nos. 19.0
drawings, specifications, electricity rules
and instructions all complete.( Make:
clipsal, North west
or eqvt.)

Supply, delivery, wiring, conduit


laying, testing & commissioning of
computer networking points with SWG23
Cat 6 cable 20/25mm dia. HDP conduit in
ceilings, walls and floors including the
necessary connecting, fixing, insulating
116 jointing materials and redoing the chiselled Point 19.0
areas with cement and sand mortar as per the
drawings,specifications all complete.
( Cables Make: Panduit or equivalent)

Supply, delivery, installation, testing


and commissioning o f 6U rack with 24 port
patch panel and 24 port PoE Switch with all
117 Set 1.0
necessary connecting and fixing accessories
including patch panel and all complete

118 Floor Junction Boxes nos. 1.0

Supply and installation of Telephone


119 socket RJ 11 with flush mounting GI Box nos. 8.0
(MAKE : Orange / Siemens / Legrand / or
equivalent)
Wiring for Telephone Point with 2
pair telephone wire , NS Aprroved , in
20mm dia NS standard medium quality
120 Pts. 8.0
PVC pipe duly concealed in wall ceiling and
floor with required chasing / chiseling all
complete
Supply and installation of Main Distribution
Frame (MDF)of 12 pair made of 18 SWG
GI sheet box with top cover, painted with 2
121 coat of enamel paint and containing of 12 set 1.0
pair IDC connector in each side(Primary
and Secondary )

122 Supply, delivery, installation, testing and rm 20.0


commissioning of 20 pair telephone cables
with PVC conduit as per the drawings,
specifications all
complete. (NS marked Eqv.)
Supply, delivery, installation, testing
123 and commissioning of 4-12 Line EPABX set set 1.0
with cover casing all complete

Supply, delivery, installation, testing


124 and commissioning of the Operator console set 1.0
as per specification with all accessories
complete
10 Pair Telephone Junction Box with
125 lockable cover and krone connector set 1.0

Supply, delivery, installation, testing and


126 commissioning of Analog telephone Set all set 8.0
complete
Supply, Installation, Testing &
Commissioning of Ligting Protection
System with Air Termination complete
set(Lighting rod copper conductor Air
termination set)-1 set), Down Conductor
Set(copper earthing wire, 1/2" dia GI pipe
for protecting the earth conductor 1.5 m in
length) & Earth Termination Set complete
(earthing copper complete set with 29 mm
Diameter GI Pipe (2 meter), 5/16 nuts &
127 bolt with spring washer cadmium maker (1 Set 1.0
set),Electrodite Backfill Chemical(25 Kg),
30 Cm x 30 Cm Cast Iron Cover for water
pouring intopit (1 set) and Funnel with wire
mesh (1 set) etc) with all Accessories : salt,
coal, cu plate, HDPE polythene pipe., etc all
complete.
Supply, Installation, Testing &
Commissioning of Copper Plate earthing
with plate size of 600 x 600 x
3.14 mm copper plate (1 Set), 25 x 3 sq.
mm copper strip with Brazing to plate, 25
mm Diameter GI Pipe (2 meter), 5/16 nuts
& bolt with spring washer cadmium maker
128 (1 set), Salt (40 KG), Charcoal Dust (4 Set 1.0
bag), 30 Cm x 30 Cm Cast Iron Cover for
water pouring intopit (1 set) and Funnel with
wire mesh (1 set) etc with all Accessories :
salt, coal, cu plate, HDPE polythene pipe.,
etc all complete.

129 Supply, Installation, Testing & Set 10.0


Commissioning of LED AC Street light
50W with auto on-off switch & auto
dimming operation including all
accessories : all complete.
Supply, Installation, Testing &
Commissioning of Distribution board 6 way
SPN for Lift made of mild steel sheet
Double cover push lock Nepal made flush
type suitable size two coat red oxide & two
coat enamel paint 14/16 guage sheet etc all
complete,
20 Amp DP MCB -1,
130 6-16 Amp SP MCB-6, Set 1.0
(MCBs, MCCBs, RCCBs, should be of
siemens, legrand or equivalent brand) with
all necessary accessories; screws, gripes, nut
bolt, cu bus bar, earth bus bar, fuse,porcelin
base, cu. strip for connection, cable
shoe,phase bar, pvc tape etc all complete.

Supply, Installation, Testing &


Commissioning of 30KVA, 6P, 50Hz, 380-
415V UPS with inbuilt BCB, 34 blocks 12V
Battery for 15 min backup, Battery Rack &
131 Set 1.0
connecting cables of Emerson or equivalent
including all accessories : all complete.

132 Supply, Installation, Testing & Set 5.0


Commissioning of specail purpose speaker
with all necessary accessories: screws,
gripes, nut bolt, cable
connector ,etc all complete.
Supply, Installation, Testing &
Commissioning of 120W or equivalent 7-
channel mixer amplifier set with buildin
sound playback device and wireless
133 Set 1.0
microphone set with all necessary
accessories: screws, gripes, nut bolt, cable
connector ,etc all complete.
Supply, Installation, Testing &
Commissioning of CL2/CL3 16 gauge (2
wire) copper audio wire for
134 Rm 50.0
speaker installation with all necessary
accessories: screws, gripes, nut bolt, cable
connector ,etc all complete.
4 set of male/female audio connector (XLR
135 or SPEAKON or equvalent.) Set 5.0

20mm PVC / HDPE conduit to run audio


136 cable to speaker point. Rm 50.0

Supply, delivery, wiring, conduit laying,


testing & commissioning of CCTV point
wiring including high quality of CAT-6
cable through 20/25mm dia. HDP conduit
in ceilings, walls and floors including the
137 necessary connecting, fixing, insulating pt. 16.0
jointing materials and redoing the chiselled
areas with cement and sand mortar as per the
drawings,specifications all complete.

Supply, delivery, installation, testing


& commissioning of 1/2.8 CMOS 2MP 3.6
mm fixed focal length Eyeball/Dome Indoor
Camera, Should have full HD resolution of
1920 x 1080 pixels or higher, True day night
function, Upto 20m or more IR distance, 3D
DNR, DWDR, Support triple streams.
138 Should be Onvif Profile S/G compliant. set. 8.0
(Brand: HIKVISION, Honeywell, Axis,
Pelco, Trueview) including all applicable
accessories as per the standard, drawings,
specifications all complete.

Supply, delivery, installation, testing &


commissioning of 1/2.8 CMOS 2MP 3.6
mm fixed focal length Bullet Outdoor
Camera, Should have full HD resolution of
1920 x 1080 pixels or higher, True day night
function, Upto 20m or more IR distance,
IP66 rated certified, 3D DNR, DWDR,
Support triple streams. Should be Onvif
139 Profile S/G including all applicable set. 8.0
accessories as per the standard,
drawings,specifications all complete.
compliant.(Brand: HIKVISION, Honeywell,
Axis, Pelco, Trueview) including all
applicable accessories as per the standard,
drawings,
specifications all complete.
Supply, delivery, installation, testing &
commissioning of at least 43" Ultra High
Defination (UHD) Monitor capable of
supporting minimum 3,840 x 2,160
resolution. Should come complete with wall
140 mount brackets and HDMI Cables (Brand: set. 1.0
Samsung, LG or equivalent) including all
applicable accessories as per the standard,
drawings,specifications all
complete.

Supply, delivery, installation, testing &


commissioning of 16 port PoE Network
Switch to support power up to 30W for each
141 port and at least 2 uplink ports including all set. 1.0
applicable accessories as per the standard,
drawings,specifications all complete.

142 Supply, delivery, installation, testing & set. 1.0


commissioning of 16 Port Patch Panel
including all applicable accessories as per
the standard,
drawings,specifications all complete.
Supply, delivery, installation, testing
& commissioning of 16 Channel Network
Video Recorder (NVR). The NVR should
have high decoding capability for ULTRA
4K HD viewing and recording, 4 SATA bay
supports up to 12 TB HDD, Supports local
as well as remote monitoring using VMS
software, Conceal up to 4 areas of a scene
from viewing and recording, H.
265/H.264/MJPEG/MPEG4 codec
decoding. Supports up to 16 alarm input
143 channels and 6 alarm relay output channels. set. 1.0
Supports sending notifications through
email, FTP and/or HTTP. Maximum
incoming and outgoing bandwidth of
minimum 320 Mbps.(Brand: HIKVISION,
Honeywell, Axis, Pelco) including all
applicable accessories as per the standard,
drawings,specifications all complete.

Supply, delivery, installation, testing &


commissioning of 6 TB Surveillance HDD
for footage backup (Brand: Western Digital,
144 Seagates or equivalent) including all set. 1.0
applicable accessories as per the standard,
drawings,specifications all complete.

145 Supply, delivery, installation, testing & set. 1.0


commissioning of Floor Junction Boxes
including all applicable accessories as per
the standard,
drawings,specifications all complete.
Supply, installation, testing &
commissioning of Digitally Addressable
Photoelectric smoke detector with integrated
bi-colour LED indicator. The integral LED
should benefit users by providing clear,
instant visual indication of the detector's
condition by changing color of the LED
according to the detector's status, such as
Green=Normal and Red=Alarm. Should
have drift compensation to ensure a
consistent alarm sensitivity threshold for
periods between service intervals. Should
146 have at least three preset alarm threshold nos. 42.0
(Low, Medium and High). The detectors
should provide to the programming remote
information such as read/write last
maintenance date, read chamber
contamination level, read value of thermal
element and perform an alarm test. The
detector should come complete with base.
(Brand: Honeywell, System Sensor)

of Digitally Addressable Rate of Rise


Heat/Thermal detector with integrated bi-
colour LED indicator. The integral LED
should benefit users by providing clear,
instant visual indication of the detector's
condition by changing color of the LED
according to the detector's status, such as
Green=Normal and Red=Alarm. The
147 detectors should provide to the nos. 5.0
programming remote information such as
read/write last maintenance date, read value
of thermal element and perform an alarm
test. The detector should come complete
with base. (Brand: System Sensor,
Honeywell, Simplex)

Supply, installation, testing &


commissioning of Red Conventional Type
Manual Break Glass Call point with Surface
or semi-flush mounting Option. With
148 integrated led to indicate normal or fire nos. 7.0
conditions. Complete as required and
approved by LPCB.
(Brand: System Sensor, Honeywell,
Simplex)
Supply, installation, testing &
commissioning Of UL listed Hooter Cum
Strobe complete with Mounting plate. The
horn strobe shall be wired as a primary-
signaling notification device. The strobe
light shall consist of a xenon flash tube and
associated lens/reflector flashing at 1 Hz
149 over the strobe’s entire operating voltage nos. 6.0
range. The horn shall have two audibility
options and an option to switch between a
temporal three- pattern and a non-temporal
(continuous) pattern. (Brand: System
Sensor, Honeywell, Simplex)

Supply, installation, testing &


150 commissioning of Fire Alarm Control set 1.0
Panel(FACP)
151 Supplying, drawing, connecting, testing & pts. 54.0
commissioning of 2 core 1.5 sq. mm. FRLS
Armoured pure copper cable in RED colour
for FAS Zone.
(Polycab, Excel or equivalant)
Supplying, drawing, connecting,
testing & commissioning of 2 core 1.5 sq.
mm. FRLS Armoured pure copper cable in
152 pts. 6.0
BLACK colour for FAS Sounder Circuit.
(Polycab, Excel or equivalant)

Supply, Installation, Testing &


Commissioning of Three phase energy
meter/(CT meter) with 160 Amp MCCB
153 Set 1.0
25KA and meter box with all necessary
accessories: screws, gripes, nut bolt etc all
complete.
Supply, Installation, Testing &
Commissioning of Three step manual
changeover switch, 160 Amp, FP, Siemens,
154 Set 1.0
Hager or equivalent with all necessary
accessories: screws, gripes, nut bolt etc all
complete.
Main Breaker Pannel Board double door
type with locking arrangement with 2 coat
of red oxide metal primer & 3 stage quallity
paint before final coat of enamel paint(Three
Phase, Neutral link, Earth link) TPNE
Copper bus bar including necessary
accessories for internal wiring at the board
excluding the cost of MCCB & measuring
instruments, board made of mild steel sheet
with cu. busbar double cover floor mount
size 12"x38"x52" (150/200A) & color push
type lock for housing the following items all
complete. (space for 8 no. MCCB).
Electronic Digital Volt Meter capable of
measuring 0-500V-1, Electronic Digital
155 Ammeter-1, 7 position Volt Selector-1, 4 Set 1.0
position Amp Selector-1, 2 A MCBs-3, C.T.
Coil-3, Indication LED Light-3, Brass Cable
Glands-17, 160 Amp TP MCCB
incoming( 25 kA)-1,40 Amp TP outgoing
MCCB 25KA-1,32 Amp TP outgoing
MCCB
-2,20 Amp TPN outgoing MCB -1,20 Amp
DP outgoing MCB -3 etc (MCBs, MCCBs
should be of siemens, legrand or equivalent
brand) with all necessary accessories:
screws, gripes, nut bolt, cable shoe ,etc all
complete.

Supply, Installation, Testing &


Commissioning of 4 core 95 sq.mm
armoured copper PVC/XLPE cable NS
marked or equivalent for supply to Main
156 Panel room from transformer point and Rm 40.0
generator point (APPROX. ) with all
necessary
accessories: screws, gripes, nut bolt, cable
shoe ,etc all complete.
Supply, Installation, Testing &
Commissioning of: TR52 Type (Steel
Tubular Pole): 100 kVA Transformer with
all necessary accessories; screws, gripes, nut
bolt, cable shoe, pvc tapewith all necessary
157 accessories: screws, gripes, nut bolt etc all Set 1.0
complete
Transformer intallation setup should be
design and estimated in colabration with
NEA
Supply, Installation, Testing &
Commissioning of Kirloskar Green Gensets
or eqv. water cooled diseal engine
125HP/92KW,6 cylinder with electric
starting arrangements, coupled with
alternator of 100 KVA 3 phase , 415V,
50Hz, 0.8 p.f with control panel, fuel tank,
base frame, safety devices, & control panel
158 mounted on DG set with auto start/stop Set 1.0
AMF with ATS control panel for power
backup with all necessary accessories;
screws, gripes, nut bolt, cable shoe, pvc
tapewith all necessary accessories: screws,
gripes, nut bolt etc all complete

Supply, Installation, Testing &


Commissioning of Copper Plate earthing
with plate size of 600 x 600 x
3.14 mm copper plate (1 Set), 25 x 3 sq.
mm copper strip with Brazing to plate, 25
mm Diameter GI Pipe (2 meter), 5/16 nuts
& bolt with spring washer cadmium maker
159 (1 set), Salt (40 KG), Charcoal Dust (4 Set 1.0
bag), 30 Cm x 30 Cm Cast Iron Cover for
water pouring intopit (1 set) and Funnel with
wire mesh (1 set) etc with all Accessories :
salt, coal, cu plate, HDPE polythene pipe.,
etc all complete.

Supply, Installation, Testing and


Commissioning of 1 Tr Single Split Wall
Mounted Type Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
160 Nos 3.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.

Supply, Installation, Testing and


Commissioning of 1.5 Tr Single Split Wall
Mounted Type Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
161 Nos 3.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.
Supply, Installation, Testing and
Commissioning of 2 Tr Single Split Wall
Mounted Type Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
162 Nos 1.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.

Supply, Installation, Testing and


Commissioning of 1 Tr Single Split Ceiling
Cassette Type Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
163 Nos 1.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.

Supply, Installation, Testing and


Commissioning of 1.5 Tr Single Split
Ceiling Cassette Type Air Conditioner
inclusive of interconnecting power and
control cables, drain pipes, individual
164 Nos 3.0
remote controllers and supports for indoor
units, outdoor units and pipes made of MS
angle/ rods as per specification.

Supply, Installation, Testing and


Commissioning of 2 Tr Single Split Ceiling
Cassette Type Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
165 Nos 3.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.

Supply, Installation, Testing and


Commissioning of 3 Tr Single Split
Ductable unit Air Conditioner inclusive of
interconnecting power and control cables,
drain pipes, individual remote controllers
166 Nos 1.0
and supports for indoor units, outdoor units
and pipes made of MS angle/ rods as per
specification.

167 Supply,fabricate, Installation, Testing and Sq. Mtr 25.0


Commissioning of GI Duct inclusive of
supports and 13 mm Nitrite insulation .

Supply, Installation, Testing and


168 Commissioning of 15"X15" Diffuser . nos 4.0
Supply, Installation, Testing and
169 Commissioning of 6" IntakeExaust Fan nos 1.0
Louver Type .

Supplying and fixing Main pump:


-10H.P (Head- up to25.0mtr., Discharge-
1200Lpm)Fire pump including control panel
board, Required Cable,Stairner for both
170 Set 1.0
pump,pressure switches,pressure guage all
complete set with testing and ready for
operation.

Supplying and fixing Jockey pump:


-3H.P (Head- up to 15.0mtr., Discharge-
180Lpm)Fire pump including control panel
board, Required Cable,Stairner for both
171 Set 1.0
pump,pressure switches,pressure guage all
complete set with testing and ready for
operation.

M.S Flange with washer and nut and bolt


172 all complete set. 150 mm Nos. 55.0

M.S Flange with washer and nut and bolt


173 all complete set. 100 mm Nos. 4.0

M.S Flange with washer and nut and bolt


174 all complete set. 80 mm Nos. 6.0

M.S. heavy pipe with necessary M.S. pipe


fittings in welded joint with necessary MS
weldeable flanged ser as required(Nut,Bolt
Gasket) includiiing necessary pipe sleeve in
the wall,Brackets Clamps,Hanger Etc.
Testing of pipe lins with hydraulic presure
175 of10 kg/sq.cm,rectifyinig the leakage,if Rm 84.0
any,and also painted with one coat of primer
and two coat of Red colour all complete set
with testing and ready for operation . 150
mm

M.S. heavy pipe with necessary M.S. pipe


fittings in welded joint with necessary MS
weldeable flanged ser as required(Nut,Bolt
Gasket) includiiing necessary pipe sleeve in
the wall,Brackets Clamps,Hanger Etc.
Testing of pipe lins with hydraulic presure
176 of10 kg/sq.cm,rectifyinig the leakage,if Rm 6.0
any,and also painted with one coat of primer
and two coat of Red colour all complete set
with testing and ready for operation .100
mm
M.S. heavy pipe with necessary M.S. pipe
fittings in welded joint with necessary MS
weldeable flanged ser as required(Nut,Bolt
Gasket) includiiing necessary pipe sleeve in
the wall,Brackets Clamps,Hanger Etc.
Testing of pipe lins with hydraulic presure
177 of10 kg/sq.cm,rectifyinig the leakage,if Rm 3.0
any,and also painted with one coat of primer
and two coat of Red colour all complete set
with
testing and ready for operation . 80 mm

M.S. heavy pipe with necessary M.S. pipe


fittings in welded joint with necessary MS
weldeable flanged ser as required(Nut,Bolt
Gasket) includiiing necessary pipe sleeve in
the wall,Brackets Clamps,Hanger Etc.
Testing of pipe lins with hydraulic presure
178 of10 kg/sq.cm,rectifyinig the leakage,if Rm 6.0
any,and also painted with one coat of primer
and two coat of Red colour all complete set
with testing and ready for operation . 25
mm

179 Supply, erection, testing & commissioning kg 40.0


of STEEL STRUCTURE For Pipe Support
as detailed in technical specification &
drawings for pump house

Supply, erection, testing and commissioning


180 of 3/8" PRESSURE SWITCH with all Nos. 1.0
accessories.
Supplying and installation of 25mm 30
181 meter hose reel pipe including 360 degree Sets 2.0
hose reel drum .
Supplying and installation of 25 meter
182 RRL . Sets 4.0

183 AIR RELEASE VALVE 25 mm Set. 2.0

Supply,installation & Testing of M.S.


fire hose cabinet 16 gauge of size
1500x800x700mm with clear glass double
184 Set 2.0
door. Double coating metal primer & red
enamel painting local febricated.
(EXTERNAL).
185 Supply, erection, testing & commissioning Nos. 6.0
of Butterfly Valve with companion flanges,
gaskets & nuts and bolts. Valves shall be as
per
Specification. 150 mm
186 Supply, erection, testing & commissioning Nos. 2.0
of Butterfly Valve with companion flanges,
gaskets & nuts and bolts. Valves shall be as
per
Specification. 100 mm
187 Supply, erection, testing & commissioning Nos. 1.0
of Butterfly Valve with companion flanges,
gaskets & nuts and bolts. Valves shall be as
per
Specification. 80 mm
188 Supply, erection, testing & commissioning Nos. 1.0
of Non Return Valve with companion
flanges, gaskets & nuts and bolts. Valves
shall be as per
Specification. 150 mm
189 Supply, erection, testing & commissioning Nos. 1.0
of Non Return Valve with companion
flanges, gaskets & nuts and bolts. Valves
shall be as per
Specification. 80mm
190 Supply, erection, testing & commissioning Nos. 2.0
of Hydrant Valve with companion flanges,
gaskets & nuts and bolts. Valves shall be as
per
Specification. 80 mm
191 Supply, erection, testing & commissioning Nos. 3.0
of Ball Valve with companion flanges,
gaskets & nuts and bolts. Valves shall be as
per
Specification. 25 mm
Supply, erection, testing and commissioning
192 of PRESSURE GUAGE with all Nos. 3.0
accessories.
Supply, erection, testing and commissioning
193 of AIR VESSEL 300 X 1500 MM with all Nos. 1.0
accessories.
Supply, erection, testing and
194 commissioning of CO2 GAS CYLINDER Nos. 2.0
4.5 KG with all accessories.

Supply, erection, testing and commissioning


195 of 25 MM BRANCH PIPE with all Nos. 2.0
accessories.

196 SHUTT- OFF NOSAL Nos. 2.0

197 GASKET 150 mm Nos. 10.0

198 GASKET 100 mm Nos. 8.0

199 GASKET 80 mm Nos. 12.0

Supply, erection, testing and commissioning


200 of FIRE MAN AXE with all accessories. Nos. 2.0

201 NUTS AND BOLTS 5/8 KG KG 13.0

earthwork in excavation for the site


202 devlopment in perfect line level as specified cum 7560.0
by site engineer
supllying and laying Ashlar stone masonary
203 in 1:4 c/s mortar in perfect line level as cum 1471.5
specified by site engineer
Total of Procument Items

Total Item Price

VAT

Grand Total
antities
Unit Rate(NPR) Amount(NPR)
96445.0 96,445.00
1099269.73 1,099,269.73
87464.0 87,464.00

Bidder's Rate (in words) Total Amount


(NPR)

Details

Bidder's Rate (in words) Total Amount


(NPR)
ent Items
B. Earth work in excavation and filling
Earth Work in Excavation in foundation (soft-clay & silty soil) for lift up to1.5 m. including timbering, pumping out water from the
foundation trench, stacking the soil 0.90 m. minimum from the edge of foundation, filling the excavated clean & grub of soil in
foundation trench & disposing the excess soil upto a lead of 10.00 m as per instruction & specification complete work (Machine 70%)

1. Earth work in excavation in soft clay/silt including 10m hauling, disposing & 1.5m
Resources Level/Type Quantity Unit Rate per Amount
Unit
Labours: Coolies 0.700 Nos. Err:509 Err:509
Tools & Equipments 3% of total labour cost Err:509
Actual rate
Rate 15% contractor's overhead
Per cum. Per cft. Total
Err:509 Err:509
timbering, pumping out water from the
excavated clean & grub of soil in
fication complete work (Machine 70%)

(1cu.m./35.28 cft)
Total from each
Resources
Err:509
Err:509
Err:509
Err:509
Err:509

You might also like