Professional Documents
Culture Documents
1. A RC slab is 125mm deep overall simply supported over a span of 2.5m. The slab is
loaded with uniformly distributed loads as follows:
Live: 5 kN/m2
Calculate the amount of flexural reinforcement required. Also calculate the allowable
span to depth ratio assuming Asprov = Asreq and check the shear capacity.
2. A RC slab is 250mm deep overall simply supported over a span of 4.0m. The slab is
loaded with uniformly distributed loads as follows:
Dead: self
Live: 5kN/m2
Calculate the amount of flexural reinforcement required. Also calculate the allowable
span to depth ratio assuming Asprov = Asreq and check the shear capacity.
3. A RC slab is 225mm deep overall simply supported over a span of 4.0m. The slab is
loaded with uniformly distributed loads as follows:
4. A RC slab is 225mm deep overall acting as a cantilever with a span of 3.0m. The slab is
loaded with uniformly distributed loads as follows:
Dead: self
Calculate the amount of flexural reinforcement required. Also calculate the allowable
span to depth ratio assuming Asprov = Asreq and check the shear capacity.
5. A RC slab is 225mm deep overall acting as a propped cantilever with a span of 5.0m.
The slab is loaded with uniformly distributed loads as follows:
Dead: self
Calculate the amount of reinforcement required at the support and also near the
midspan. Also calculate the allowable span to depth ratio assuming Asprov = Asreq and
check the shear capacity.