Professional Documents
Culture Documents
a) alpha. B) bita
c) gamma D) delta
a) alpha B) bita
c) gamma. D) delta
a)Pb-Sb. B)Cu-Sb
c)Cu-pb. D)Sn-Sb
4. Which of the following treatment does not need heating of steel above A1 or A3 temp?
c) carburising d) Nitriding
a) Martensitic b) peritectic
c) Eutectic d) eutectoid
2. Which of the following cast irons are high carbon, high silicon irons?
a) perlite b) benite
c) martensite d) ledeburite
a) Fatigue b) Creep
c) Impact d) hardness
a) Rhombohedral
b) Orthorhombic
c) Body centered tetragonal
d) Cubic
6) Which of the following hardness test, will you recommend for testing hardness of Grey Cast Iron ?
a) Duralumin b) Babbits
8) Which of the following annealing treatments are carried out by heating the steel above A,
temperature?
9. Which of the following entities obtained from tensile test are indicative of ductility of material?
MULTIPLE CORRECT
A) Eutectic
B) Peritectic
C) Monotectic
D) Eutectoid
6. Which of the following are the characteristics of non solid solution alloys?
D) Carburising
8. Which of the following methods are commonly used for mfg. of iron powder ?
C) Atomisation D) Electrodeposition
A) Carbon
B) Nitrogen
C) Nickel
D) Manganese
A) BCC str.
B) FCC str.
C) BCT str.
D) HCP str.
A) AISI
B) SAE
C) EN
D) ASTM
Austenite?
A) Spherodising B) Patenting
A) Martempering D) Homogenisation
13. Which of the following shows pronounced yield pt. during tensile test?
A) M.S.
B) Med ‘C’ steel
C) Aluminium alloys
D) C.I.
14. Which hardness test among the following is best suited for grey C.I.?
Á) Brinnel
B) Vickers
B) Rockwell
C) Shores scleroscope
A) Normalising B) Tempering
A) Surface cracks
D) None of above
C) Nonmagnetic
D) Hard
E) Easy to weld
A) Modification treatment
C) Malleablising treatment
D) Stabilizing treatment
11. Magnetic particle test can be done on
A) Brass
B) Aluminium alloys
C) Babbits
A) Pb-Sn alloys
B) Cu-Zn alloys
C) Al-Si alloys
D) Al-Cu alloys
13. Gear teeth hardening upto certain case depth can be done by following for 0.4%
C) Carburising D) Austempering
A) By subzero treatment
B) By annealing
C) By martempering
D) By normalising