Professional Documents
Culture Documents
Q.2- Presence of dirt, oil and oxides on the base metal cause
A. Porosity
B. Incomplete fusion
C. Crack
D. Burn through
A. Maroon colour
B. Black colour
C. Red colour
D. Peacock Blue colour
A. Helium
B. Argon
C. Krypton
D. Xenon
Q.6- If the job is in Positive terminal and Electrode is in negative terminal then it will come under which
polarity
A. Reverse Polarity
B. Straight Polarity
C. Both
D. None of these
Q.7- TIG Welding is preferred because ___________
A. It is less costly
B. Arc control is very easy
C. It can be used for all position welding
D. It is a very fast welding process
Q.8- For TIG welding of Aluminium, following current and polarity used is ___________
A. A.C.
B. DCEN
C. DCEP
D. All of these
A. Red
B. White
C. Green
D. Gray
Q.12- Which of the weld defects are most common in TIG welding?
A. Porosity
B. Tungsten inclusions
C. Crack
D. Slap inclusion
Q13- Colour of 2% Thoriated Tungsten electrode is ___________
A. Red
B. Green
C. Pink
D. White
A. DC supressor unit
B. HF unit
C. Flint lighter
D. Anyone of these
A. By flame
B. By sniff
C. By matchstick
D. By soap solution
A. True
B. False
Q.17. GTAW torches used for welding over 200 amps should be water-cooled
A. True
B. False
Q.18- The gas cup size used is determined by the diameter of the tungsten electrode required
A. True
B. False
Q.19. The torch is held at a 45 degree angle when welding a T-Joint in horizontal position.
A. True
B. False
Q.20- Which of the following statements is/are true for welding process?