Professional Documents
Culture Documents
1.1.2 DRAWINGS:
1.2.2 GA DRAWINGS:
Bus bar material such as Conductor, Tubular Bus bar, Insulator & Hardware, Power & Terminal
connector etc.
BOM for all switchyard equipments.
Auxiliary Power & Control Cable.
BOM for Lighting Material.
BOM for Earthing & Shielding.
All Engineering activities including preparation of drawings will be carried out from your end. Drawings /
documents soft copies shall be submitted to KPPL for approval
You shall provide all Technical Inputs/Drawings/Documents to KPPL for approval. If required you need to
depute your design personnel from Chennai for attending essential technical discussions with M/s.
KPPL / Client to provide critical clarifications on chargeable basis.
INPUT DATA:
The following inputs shall be provided by KPPL- GA drawings of all Electrical equipment & Control &
Relay Panel schematic Site data like SBC, Wind speed and Earth resistivity. Existing Tower, Girder and
Equipment support Structure drawings.
NOTE:
Please provide your offer in two options, i.e.,