Professional Documents
Culture Documents
MAINTAIN POTENTIALS PROJECT- SDGM-16" SWD LINE 11-19000-9181 Br. CAT INT'L CO.
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
N/A N/A D29
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
N/A N/A
SCHEDULED TEST DATE & TIME ACTUAL TEST DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
N/A N/A SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
SATIP-L-350-01 2.8
SAUDI ARAMCO INSPECTION LEVEL
S
CONTRACTOR INSPECTION LEVEL
H
YES
NOTES: Per SAES-A-206, Para. 12.1.2 - The log shall identify each component and weld corresponding to an individual equipment item or piping
spool and shall include the equipment or spool number and purchase order number. To supplement this log, where applicable (per SAES-A-206, Para.
12.2.3), the field Fabricator shall prepare a detailed PMI map of the pressured equipment being fabricated. The map shall show the alloy material
specification of each alloy component and the extent of PMI required per this standard.
REMARKS:
REFERENCE DOCUMENTS:
1. SAES-A-206 - Positive Material Identification (30 April 2011)
MAINTAIN POTENTIALS PROJECT- SDGM-16" SWD LINE 11-19000-9181 Br. CAT INT'L CO.
EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.
N/A N/A D29
LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.
N/A N/A
SCHEDULED TEST DATE & TIME ACTUAL TEST DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
N/A N/A SAUDI ARAMCO USE ONLY
SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?
SATIP-L-350-01 2.8
SAUDI ARAMCO INSPECTION LEVEL
S
CONTRACTOR INSPECTION LEVEL
H
YES
NOTES: Per SAES-A-206, Para. 12.1.2 - The log shall identify each component and weld corresponding to an individual equipment item or piping
spool and shall include the equipment or spool number and purchase order number. To supplement this log, where applicable (per SAES-A-206, Para.
12.2.3), the field Fabricator shall prepare a detailed PMI map of the pressured equipment being fabricated. The map shall show the alloy material
specification of each alloy component and the extent of PMI required per this standard.
REMARKS:
REFERENCE DOCUMENTS:
1. SAES-A-206 - Positive Material Identification (30 April 2011)
*Person Responsible for Implementation of Test and Analysis of Results Y = YES N = NO F = FAILED