Professional Documents
Culture Documents
TOOLS
M A N U FA C T U R E R & E X P O R T E R O F
Tube Cleaners, Tube Tools,
Tube Expanders, Bolting Tools, Impact Sockets,
Pipe Beveling Machines,Pipe Cold Cutting Machines,
High Pressure Water Jet Cleaning Machines &Tapping Machines
INTRODUCTION BH R T IY
TUBE TOOLS
Basic Products:
Engineering products is our forte. We manufacture engineering products such as tube expander,
tube cleaner, tube tools, hydraulic tube expansion, tube pulling, and pipe beveling machines. We also
deal in manufacture of flexible shaft grinders, construction equipment, hydraulic torque wrench,
impact socket, pneumatic tapping machines, and many more…
In 2016, we added SHINGARE INDUSTRIES PVT. LTD. a new company in our group. We were
awarded ISO 9001:2015 certification for strictly followed quality norms and processes.
Dedicated Staff:
We have a dedicated team of more than 40 people, many of whom are with us since the early days of
the company. We have an excellent blend of youth, knowledge, and experience in our ranks.
Export oriented:
We export over 60% of our products to more than 55 countries all over the globe.
Expansion:
We feel the need to expand our business to enable us to serve the people of this country better. With
this aim in mind, we established a new company in the name of SHINGARE INDUSTRIES PVT. LTD.
2
CONTENTS
7. Tube Plugs
6-7
Rubber Tapered Tube Plugs
8.
SISSTA, TIRUPATI 2017 MAHATECH, PUNE 2015 STAI, NEW DELHI 2016
3
BH R T IY
3/8” O.D.to 4”O.D.
TUBE TOOLS
Tube O.D. MT
Model No.
5/8 KT-625
www.shingare.com
3/4 KT-750
Size Available :3/8” O.D.to 4” O.D. 7/8 KT-875
1 KT-1000
1.1/4 KT-1250
FEATURES: 1.1/2 KT-1500
1.3/4 KT-1750
l Tube drifts are available for mm tube sizes also.Please enquire. 2 KT-2000
l It is used to make walls of heavy gauge tubes more thin as a pre-requisite 2.1/2 KT-2500
step in their removal from tube sheet. 2.3/4 KT-2750
3 KT-3000
l Available in 01 & 06 shanks as standard. 15 (Jumbo) as a stepin their
3.1/4 KT-3250
removal from tube sheet. shank available on request. 3.1/2 KT-3500
4 KT-4000
Tube O.D.
COLLAPSING TOOL
Model No.
Inch
3/8 CT-375
1/2 CT-500
5/8 CT-625
Size Available :3/8” O.D.to 2.1/2” O.D.
3/4 CT-750
l Collapsing tools are used to tube collapse tube & drive out collapsed 7/8 CT-875
tube from tube sheet with chipping hammer. 1 CT-1000
l Available in 01 & 06 shanks 1.1/4 CT-1250
l Collapsing tools are available for mm tube sizes. Please inquire 1.1/2 CT-1500
1.3/4 CT-1750
2 CT-2000
Chipping Hammer with safety retainer for use with Tube Drifts / Collapsing Tools.
MODEL CH-1- SPECIFICATION
4
BH R T IY
www.shingare.com
www.tubecleaner.co.in
FEATURES:
Size Available :1/2” O.D.to 4.1/2” O.D.
l The internal tube cutter BPR-68 is driven via the square in a clockwise
direction using either an electric, pneumatic,or hydraulic driving machine.
l BPR-68 tube cutters are ideal for cutting thick walled boiler tubes of 2”
O.D. & higher.
Spare Bite Tube I.D.Range Max Tube O.D. Body Diameter Drive
Tool Size
Model No. Square
Model No.
Inch Mm Inch Mm Inch Mm Male
0680951 095 1680951 .394 - .472 10-12 .591 15 .374 9.5
5
5/8” -O.D to 2.1/2” O. D.
BH R T IY
TUBE TOOLS
3/8” - 4” Tube O. D.
TUBE PLUGS
One Piece
l Tube plugs are designed for sealing off leaking or damaged 1/2 12.70 BPLG-500-1 BPLG-500-1
tubes in heat exchanger, condensers, boilers etc. It ensures a 5/8 15.87 BPLG-625-1 BPLG-625-2
uniform joint without damaging the tube sheet. removal of 3/4 19.05 BPLG-750-1 BPLG-750-2
welded tubes from the tube sheet. 7/8 22.22 BPLG-875-1 BPLG-875-2
l Note: Tube plugs are available in a variety of materials like
1 25.40 BPLG-1000-1 BPLG-1000-2
carbon steel, brass, stainless steel, fibre etc. stainless
1.1/4 31.75 BPLG-1250-1 BPLG-1250-2
steel, fibre etc. Specify material needed when ordering.
1.1/2 38.10 BPLG-1500-1 BPLG-1500-2
DESCRIPTION
www.shingare.com
Low-pressure rubber tapered tube plugs offer a cost-effective alternative to more costly tube plugs for temporary or low-
pressure applications. These plugs, made of neoprene, are typically used for low-pressure isolation or vacuum testing in
combination with our Vacuum Leak Detector (VLD-2500).
Easy to install - remove with the tap of a rubber mallet or the pull of pliers; reusable with proper installation & care, and
temperature resistant from -25°F to 180°F (-31°C to 82°C).
SHINGARE Industries is a leader in offering tube plug solutions to users in the oil & gas, chemical and power industries. We
have more than 500,000 tube plugs in stock and ready to ship.
FEATURES:
6
1/4” O.D to 1” O. D.
BH R T IY
TUBE TOOLS
Reusable Low-Pressure Rubber Tube Plugs for Isolation or Vacuum Testing Applications.
FEATURES:
One size fits multiple port sizes.
7/8 15-24
TP - 25 - R 0.719 0.938 18.263 23.825
1 10-19
www.shingare.com
www.tubecleaner.co.in
1 11-24
TP - 28- R 0.750 1.000 19.050 25.400
1-1/8 7-14
1-1/8 16-24
TP - 31 - R 0.969 1.109 24.613 28.169
1-1/4 10-13
1-1/4 13-24 TP - 31-1 - R 1.031 1.250 26.187 .31.750
1-1/2 14-24
TP - 41 - R 1.312 1.625 33.325 41.275
1-5/8 10-20
2 18-24
TP - 57 - R 1.875 2.203 47.625 55.956
2-1/4 8-18
2-3/4 12-18
TP - 69 - 1 - R 2.438 2.969 1.325 61.925 75.413 34.925
3 6-16
3 12-18 TP - 76 - R 3.000 3.500 1.500 76.200 88.900 25.400
7
BH R T IY
3/8” O. D. to 1”O.D
TUBE TOOLS
FEATURES:
l This one revolution Internal Tube Cutter is designed for hand operation using a ratchet handle.
l BHARTIYA “One Revolution” Internal Tube Cutter pierces and cuts off non-ferrous tubes in one revolution.
l The cutter tool Bit operates on an eccentric principle. The tube cutter is entered in the tube with the Tool Bit closed
position, ratchet is applied and turned in clockwise direction. The Tool bit contacts the tube during the one revolution &
pierces the tube wall & as turning is continued the Tool Bit shares through the Tube along its circumference. This cutter
is fitted with an adjustable collar enabling it to reach into tubes Tube along its circumference. This cutter is fitted with an
adjustable collar enabling it to reach into tubes at various distances and they are available in optional increments of 2”
(50.8mm). Standard adjustable reach is 6 “(152.4mm). “A” reach = 8” 203.2), B reach = 10” (254.0mm), C reach= 12”
(304.8mm) etc.
www.tubecleaner.co.in
www.shingare.com
8
1/4” O.D to 1” O. D.
BH R T IY
TUBE TOOLS
FEATURES:
l Simple Design: Only two major parts reduce inventory
l No power needed: Manual insertion and removal of tube with a hand wrench. Ideal for field service application.
l Ease of use: Hex at back of spear allows tightening without disassembly of thrust mechanism.
l Range of Sizes: A wide range of sizes allows use on popular tube size. Clarity of marking: Both spear & thrust collar are clarify
marked for last relating tool to job
l Larger sizes can be mad e available on request.
Tube Size
Tube Pullar Spare Spear
O.D. Wall Thickness I.D. Model No. Model No.
BWG
Inch Mm Inch Mm Inch Mm
www.shingare.com
www.tubecleaner.co.in
1/4 6.35 18 .049 1.24 .152 3.86 BMTP-25-18 BMPS-25-18
9
BH R T IY
TUBE TOOLS
80-3055-7 1.1/4”-1.1/2”
80-36308 2”2.1/4”
80-36309 2.1/2”
80-36310 2.3/4”-3
B3055-5 MALE X MALE EXTENSION
l Note: All the above items are compatible for use with Tube Pulling
Systems of Airetool, Wilson, Elliot & other manufacturers of “Pipe
Jenny” style systems. B3055-5 MALE X FEMALE EXTENSION
Authorised Dealer
Manufactuer & Exporter of Tube Cleaners, Flexible Shafts,Tube Tools,Pipe Bevelling Machines,
Torque Tools, Grinding Tools, Tapping Tools.
A-48 B Osiya Mataji Compound,Village Kalher, Retibunder Road, Tal. Bhiwandi,Dist. Thane - 421302, Maharashtra,