Professional Documents
Culture Documents
In this Lab we got to Learn to Become familiar with Chopper / Inverter Control Unit in the -
various chopper
- Designed to build two major types of power electronic circuit : chopper , and invertor
List of equipment:
1) Chopper / Inverter control unit
2) Chopper / Inverter IGBT
Part1 :
# Circuit Diagram 1 (Circuit for observing the operation of the Chopper/Inverter
Control Unit in the CHOP. PWM MODE )
# Procedure
1- Dc source 1 :- Mid position
2- Dc source 2 :- minimum
3- Select PWM mode
adjust F = 1 kHz
Yes No
# waveform by oscilloscope
[ 1 and 2 at 50% duty cycle 1kHz ]
- In the this sketch we did operation of the Chopper/Inverter Control Unit in the CHOP. PWM MODE.
control signal
First We adjust Frequency to 1 KHz
seconde We observed the control signal using oscilloscope
(1 , 2 ,4 , 5 )
In conclusion , the laboratory was interesting and helpful to do, this lab experiment enabled
me To become familiar with with Chopper / Inverter Control Unit in the various chopper .
Moreover we Designed to build two major types of power electronic circuit : chopper , and
invertor . Also observed we have observed the control signal (1,2) (4,5) finally there was some
mistake and solve it . and we are looking forward to gaining more and more knowledge about
power electronic next lab .