Professional Documents
Culture Documents
• Copyright by Bureau Expo Dubai 2020 (EX20). All rights reserved. This
document may not, in whole or in part, be reproduced, stored, transmitted or
distributed in any form or by any means, whether electronic, mechanical, by
photocopy, recording or otherwise, without the prior written permission of EX20.
Except where otherwise expressly agreed in writing by EX20, EX20 shall have
no responsibility or liability for any loss (direct, consequential or otherwise)
which may arise from reliance on or use of this document or the information
contained therein.
• Where dimensions are not given, drawings must not be scaled and the matter
should be referred back to John R Harris & Partner's.
• This drawing should be read in conjunction with all other project information,
produced by John R Harris & Partner's and others. In the event of any conflict
1 2 3 4 5 6 7 8 9 10 100 110 between the information contained on this drawing and in any other project
document, drawings, specifications, schedules etc. the matter must be referred
back to John R Harris & Partner's for clarification.
5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 • All dimensions and conditions are to be checked on site by the contractor prior
700 1000 500 500 500 500 to preparing designs, shop drawings, calculations etc. or commencing any
375 500 500
RC WALL 250 THK RC WALL 250 THK RC WALL 250 THK RC WALL 250 THK RC WALL work.
• The contractor is responsible for checking that there is no conflict between site
700
700
700
TOF+ 23.73 dimensions and drawn dimensions.
• The contractor shall submit full shop / setting out drawing for approval (based
on site dimensions) prior to commencement of any site works, placing of
1000 1300
orders, manufacture of fittings, fixtures and components.
• Approved drawings from consultants do not relief the contractors from his
250 THK RC WALL RC WALL 600 THK RC WALL 250 THK RC WALL 250 THK RC WALL 250 THK RC WALL
584
584
584
584
contractual obligations or that of adhering to requirements in accordance with
A
1500
1500
1500
latest edition of Fire and Life Safety Code of practice and the International
P2 P3 250 THK RC WALL P4 P6 CF3
916
916
P1 P5 P2 Codes & Standards referred to within where applicable.
P4 P4 TOF+ 23.73
1365
TOF+ 23.73 TOF+ 23.73
300
P15 hazard symbol referencing the unusual residual hazards / risks are listed
RC WALL
RC WALL
RC WALL
1035 965
250 THK RC WALL
950
P15 1345 P15 above.
STB
1370
1455 1000 1300 850
2057
2060
S5
2534
DO NOT SCALE THIS DRAWING.
STB
STB
5000
STB
1435 565
F20 830 670
P15 STB P15
P7 P19 P15 STB STB P15 STB SC8 P20 F12,2
1550
165 1335
1340
P15 P15
1270
STB
STB
STB STB STB
930
F15,3
STB
B
F15,2 F15,2
570
571
660
P8
730
955 545 F15,3
822 678
500 500
STB
STB
250 THK RC WALL S7 N
STB
STB
STB
ST-503 F15,1
STB
Makka
h
STB
2190 475
5000
450 1050
810 690 850 650 815 685 1150 550 P15 815 685 P15 F15
F15,2
1500
700
P9 ST B General Notes
2000
P15 P15 P15 P15 P15 P15 P15 P15
STB STB STB STB STB STB STB STB
1290
225 1275
225 1275
225 1275
235 1265
P14
F22,31
550
C
235
410
B
625
805
F15,3
ST
F15 F15,3 1760 2315 925
250 THK RC WALL
STB
P15
ST
F20,175-1
B
1700
STB
MATCH
ST
1700
B
LINE B
1500
STB
STB
1120 380
5000
STB
STB
STB
1500
1500
1220 845
2850
F15,2 F17,1 1200 1290 ST F20,1
B 1010 1500
B CF1
P15 STB P15 ST
1000
P15 P15 P15 STB P15 P15 TOF+ 24.34
865
850
F15,3 F15,3 STB
720
720
STB STB
D P15
B
ST
835
850
1000
ST
1130
IN PROGRESS
ST
TOF+ 24.34
1470
B B
ST
1900
B
F12,4 F12,3
1840 1405
STB
1825 1260 740
P8 P15 P15 F15,86
P15 STB F12,3 P15
50
S17 F12,3
L
TOF+ 24.23
STB
5000
AL
STB
STB
0T
STB
P8
STB
W
HK
1200 ST-504
RC
300 THK SLAB
ST
RC
1290 1235
HK
B
700 1515
W
F12,4
0T
AL
70
P15 P15 P15
50
F20,1
2330
0
540
STB
STB
F12,4
1330
CF1
250 THK RC WALL
P15
1000
P15 STB P15 P15 P15 CF9 STB P15
850
850
STB STB 70 STB
0 0
E 70
B
F12,3 L
AL
ST
STB
50
STB
730
730
750
850
850
1000
W
0T
F15,3 HK
RC
F15,3
0T
925 475
2510 1200 F12,3 1260 740
W
1235 50 ST-503
AL
L
STB
STB
P8 0 1220 No Description
F12,3 70 CF6
5000
STB
STB
STB
STB
SAFETY, HEALTH AND ENVIRONMENT INFORMATION
Brief details on the identified hazard symbol referencing the unusual residual
ST
ST
B
hazards / risks are listed above.
B
F15,4
ST
1200 2215 1420
B
F17,2 F15,3
P15 P15 STB P7 P15 P7 P22 P7 P7 P15 P15
850
STB STB STB
F P15 P8
CF1
MATCH
850
CF8
1 ISSUED FOR CONSTRUCTION AB AB 23/01/2020
1010 490 F17,2 LINE A 0 DETAIL DESIGN SUBMISSION AB AB 08/01/2020
Rev Description Apvr Chk'd Date
Client
STB
5000
P8
STB
F17,2
F15,2
CF1
STB STB STB STB Programme / Programme Management Consultant
G
Architectural Consultant
Project Title
300
FOUNDATION PLAN PART-2
3T25
T10@150
500
IA AB
Model File Ref: Scale A1(594x841) Revision No
10101-MDL-S605282-AR-900001 As indicated 1
Drawing No
6324-USA-ST-DG-ST-102