Professional Documents
Culture Documents
1. IDENTIFY ELECTRONIC i. Types of drawing tools such as : i. Determine drawing instrument and materials. 60
SCHEMATIC DRAWING Standard drawing paper ii. Determine schematic drawing techniques. HOURS
REQUIREMENTS Drawing board iii. Identify various symbols in electronic drawing.
T Square iv. Identify types of drawing.
Set Squares v. Determine the correct line for each drawing.
Drawing instrument compasses/ dividers vi. Identify correct lettering, numbers and dimensioning styles.
Various pencil vii. Identify various drawing lines.
Electronic schematic drawing software
ii. Drawing techniques.
iii. Drawing symbols.
iv. Types of drawing lines such as:
Border line
Object line
Construction line
Hidden Line
v. Types of lettering, numbers and dimensioning
styles such as :
Standard dimensioning methods
Standard numbering
Standard lettering
vi. Standard symbols
DIN
ASA
vii. Active components.
2. PREPARE ELECTRONIC i. Types of drawing tools such as : i. Confirm drawing instrument and materials. 40
SCHEMATIC DRAWING Standard drawing paper ii. Confirm type of drawing. HOURS
REQUIREMENTS Drawing board iii. Confirm various drawing elements.
T Square
Set Squares
Drawing instrument compasses/ dividers
Various pencil
Electronic schematic drawing software
ii. Drawing techniques.
iii. Drawing symbols.
iv. Types of drawing lines such as:
Border line
Object line
Construction line
Hidden Line
v. Types of lettering, numbers and dimensioning
styles such as :
Standard dimensioning methods
Standard numbering
Standard lettering
vi. Standard symbols
DIN
ASA
vii. Active components.
viii. Passive components
ix. Types of drawing such as :
Isometric drawing
Oblique drawing
Orthographic Drawing
- Plan, End View and Top View
- First Angle and Third Angle
WORK ACTIVITIES RELATED KNOWLEDGE APPLIED SKILLS TRAINING HOURS
3. PERFORM ELECTRONIC i. Types of drawing tools such as : i. Determine the type of drawing. 80
SCHEMATIC DRAWING Standard drawing paper ii. Produce drawing according to scale. HOURS
Drawing board iii. Produce standard symbols.
T Square iv. Utilise method in producing electronics drawing.
Set Squares v. Use standard drawing symbols.
Drawing instrument compasses/ dividers vi. Follow Flow of signals.
Various pencil vii. Adhere to standard drawing style.
Electronic schematic drawing software viii. Adhere to standard drawing symbols
ii. Drawing techniques.
iii. Drawing symbols.
iv. Types of drawing lines such as:
Border line
Object line
Construction line
Hidden Line
v. Types of lettering, numbers and dimensioning
styles such as :
Standard dimensioning methods
Standard numbering
Standard lettering
vi. Standard symbols
DIN
ASA
vii. Active components.
viii. Passive components
ix. Types of drawing such as :
Isometric drawing
Oblique drawing
Orthographic Drawing
- Plan, End View and Top View
- First Angle and Third Angle
4. SUBMIT ELECTRONIC i. Submission procedures. i. Submit electronic schematic drawing according to procedure. 12
SCHEMATIC DRAWING ii. Electronic schematic drawing standard. ii. Confirm electronic schematic drawing is produced according to standard. HOURS
NAMA PROGRAM TEKNOLOGI ELEKTRONIK
ETN 1013 - ELECTRONIC SCHEMATIC DRAWING
KOD DAN NAMA KURSUS ETN 1022 - ELECTRONIC ENGINEERING DRAWING
KSKV
ETN 3012 - ENGENEERING DRAWING
PERINGKAT / TAHUN / SEMESTER SIJIL VOKASIONAL MALAYSIA / TAHUN 1 / SEM 1
TEMPOH LATIHAN 102 HOURS
1. IDENTIFY ELECTRONIC 1.1 Types of drawing tools such as: Standard 1.1 Determine drawing instrument and materials. 30
SCHEMATIC DRAWING drawing paper, Drawing board, T Square, Set 1.2 Determine schematic drawing techniques. HOURS
REQUIREMENTS Squares, Drawing instrument compasses/ 1.3 Identify various symbols in electronic drawing.
dividers, Various pencil and Electronic 1.4 Identify types of drawing.
schematic drawing software. 1.5 Determine the correct line for each drawing.
1.2 Drawing techniques. 1.6 Identify correct lettering, numbers and dimensioning styles.
1.3 Drawing symbols. 1.7 Identify various drawing lines.
1.4 Types of drawing lines such as: Border line,
Object line, Construction line and Hidden
Line.
1.5 Types of lettering, numbers and dimensioning
styles such as: Standard dimensioning
methods, standard numbering and standard
lettering.
1.6 Standard symbols : DIN and ASA
1.7 Active components.
1.8 Passive components.
1.9 Types of drawing such as: Isometric drawing,
Oblique drawing and Orthographic Drawing
(Plan, End View and Top View, First Angle
and Third Angle).
CONTENT STANDARD LEARNING STANDARD LEARNING STANDARD
TRAINING HOURS
(WORK ACTIVITIES) (RELATED KNOWLEDGE) (APPLIED SKILLS)
2 PREPARE ELECTRONIC 2.1 Types of drawing tools such as: Standard 2.1 Confirm drawing instrument and materials. 30
SCHEMATIC DRAWING drawing paper, Drawing board, T Square, Set 2.2 Confirm type of drawing. HOURS
REQUIREMENTS Squares, Drawing instrument compasses/ 2.3 Confirm various drawing elements.
dividers, various pencil and Electronic
schematic drawing software.
2.2 Drawing techniques.
2.3 Drawing symbols.
2.4 Types of drawing lines such as: Border line,
Object line, Construction line and Hidden Line.
2.5 Types of lettering, numbers and dimensioning
styles such as: Standard dimensioning
methods, standard numbering and standard
lettering.
2.6 Standard symbols: DIN and ASA.
2.7 Active components.
2.8 Passive components.
2.9 Types of drawing such as : Isometric drawing,
Oblique drawing and Orthographic Drawing
(Plan, End View and Top View, First Angle and
Third Angle)
CONTENT STANDARD LEARNING STANDARD LEARNING STANDARD
TRAINING HOURS
(WORK ACTIVITIES) (RELATED KNOWLEDGE) (APPLIED SKILLS)
3 PERFORM ELECTRONIC 3.1 Types of drawing tools such as: Standard 3.1 Determine the type of drawing. 36
SCHEMATIC DRAWING drawing paper, Drawing board, T Square, Set 3.2 Produce drawing according to scale. HOURS
Squares, Drawing instrument compasses/ 3.3 Produce standard symbols.
dividers, various pencil and Electronic 3.4 Utilise method in producing electronics drawing.
schematic drawing software. 3.5 Use standard drawing symbols.
3.2 Drawing techniques. 3.6 Follow Flow of signals.
3.3 Drawing symbols. 3.7 Adhere to standard drawing style.
3.4 Types of drawing lines such as: Border line, 3.8 Adhere to standard drawing symbols.
Object line, Construction line and Hidden Line.
3.5 Types of lettering, numbers and dimensioning
styles such as: Standard dimensioning
methods, standard numbering and Standard
lettering.
3.6 Standard symbols: DIN and ASA.
3.7 Active components.
3.8 Passive components.
3.9 Types of drawing such as : Isometric drawing,
Oblique drawing, Orthographic Drawing (Plan,
End View and Top View, First Angle and Third
Angle).
4. SUBMIT ELECTRONIC 4.1 Submission procedures. 4.1 Submit electronic schematic drawing according to procedure. 6
SCHEMATIC DRAWING 4.2 Electronic schematic drawing standard. 4.2 Confirm electronic schematic drawing is produced according to standard. HOURS