Professional Documents
Culture Documents
:: Introduction
Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and
maintaining your new RC8B3.1e Kit. Please take a moment to read through this manual to help familiarize yourself with these
steps. We are continually changing and improving our designs; therefore, actual parts may appear slightly different than in the
illustrations. New parts will be noted on supplementary sheets located in the appropriate parts bags.
Check each bag for these sheets before you start to build.
:: RC8B3.1e Team Kit Features
• New differentials offer increased fluid capacity and more consistent feel lap after lap.
• Swaybar linkage curves have been altered to provide more chassis support throughout the suspension travel.
• All suspension arm pivots have been revised for more ground clearance resulting in better jumping and landing while also
improving durability.
• 16mm Big Bore 6061 aluminum shock bodies and caps with bleeder style caps.
• Shock springs are now compatible with other brands (20mm I.D.).
• Highly efficient drivetrain utilizes straight cut gears to provide great acceleration and run-time.
• Two-piece sliding motor mount for easy gear mesh adjustment and motor removal.
• RC8B3.1e shares 90% parts compatibility with the RC8B3.1 nitro buggy, offering the perfect solution for multi-class racers.
:: Additional
Your new RC8B3.1e Kit comes as a kit. There are some items you will need to complete your kit (refer to catalog for suggestions):
• 2 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended • Transmitter batteries (#302 recommended)
• Steering servo (#29133, 29134, 29166, 29167, 29168, 27100, 27101 recommended)
• 14.8v LiPo battery pack (#311, 318, 756, 757 recommended) • Quick charger (#616, 27200 recommended)
• 1/8 scale specific electronic speed control • 1/8 scale specific electric motor (#988, 989, 993 recommended)
• 1/8th scale buggy tires • CA (Cyanoacrylic) glue (#1597 recommended)
• Polycarbonate specific spray paint or polycarbonate specific bottled paint and airbrush
• Thread locking compound (#1596 recommended) • Needle nose pliers • Shock shaft pliers (#1675 recommended)
• Hobby knife • Reamer/hole punch • Ride height gauge (#1449 recommended)
:: Other Helpful Items
• Silicone Shock/Diff Fluids (Refer to catalog for complete listings) • Body Scissors (AE #1737)
• FT Turnbuckle Wrench (AE #1114) • Soldering Iron • Wire Cutters
• FT Hex Wrenches (AE #1655) • Calipers or Precision Ruler • FT 5.0mm Hex Drive (AE #1506)
• FT Nut Drivers (AE #1663-1668) • Green Slime shock lube (AE #1105)
Associated Electrics, Inc. Customer Service
26021 Commercentre Dr. Tel: 949.544.7500
Lake Forest, CA 92630 Fax: 949.544.7501
http://www.RC10.com · http://twitter.com/Team_Associated · http://www.instagram.com/teamassociatedrc/ · http://www.facebok.com/TeamAssociated/
3
:: Hardware - 1:1 Scale View
Flat Head (fhcs) Button Head (bhcs) Set Screws
2.5x6mm (4675) 2.5x6mm (31520) 3x3mm (25225)
4x4mm (7732)
3x10mm (25202) 3x10mm (25211)
Titaniuim (91593)
5x4mm (89221)
3x14mm (25187)
3x12mm (25203) Titanium (91584)
Titanium (91594) Ball Bearings
3x16mm (89203)
Titanium (91585) 5x8x2.5mm (8680)
3x14mm (89208)
Titanium (91595) 3x20mm (25188)
4x14mm (81260)
4x12mm (89214) 6x10mm (31404)
4x16mm (81261)
4x14mm (89217)
6x12x4mm (91561)
Socket Head (shcs)
4x16mm (81263)
2x5mm (31511)
4x20mm (81264) 8x16x5mm (91564)
2x16mm (7184)
3x8mm (89223)
3x10mm (25620)
8x16x5mm flanged
(91565)
3x24mm (89225)
Nuts (lock/plain)
15x21x4mm (91566)
M3 Nut (91477)
M3 Alum. Locknut, Blue (31550)
M3 Locknut, Black (25215
M4 Locknut Knurled
w/Flange (91148)
FT M4 Locknut, Blue (31551)
M4 Locknut, Serrated (91738)
4
:: Table of Contents
1................... Cover 16.................Center Bulkhead/ Brakes Build
(Bag 7.1, 7.2)
2................... Introduction
17 - 18 .......Anti-Roll Bars Build
(Bag 8.1)
3................... 1:1 Hardware “Fold Out”
18 - 19........Shocks Build
4................... Table of Contents (Bag 9.1, 9.2)
24 - 33....... Catalog
12 - 14........Rear Gearbox Build
(Bag 5.1, 5.2)
34................ Back Cover
:: Notes
81381 81012
Diff Shim 17mm
6x8x0.20mm Outdrive,
Front Diff
bla
c k
88
#65 ease
gr
81008
15mm
Outdrive,
!
Align pin with
Rear Diff groove in sun gear
81002 91564
Diff Ring 8x16x5
Gear, 44T Bearing
81381 81012
Diff Shim 17mm
6x8x0.20mm Outdrive,
Front Diff
88
!
#65 ease
bl a c k gr 81008
15mm
Outdrive, Align pin with
Rear Diff groove in sun gear
6
:: Differential Build (Front and Rear) - Bag 1.1, 1.2 - Step 4
81384
Diff
!
89208 x4
Gasket 3x14mm
FHCS
Racer’s Tip:
88 Use black grease
#65 ease
c k gr (#6588) to coat
bl a
the Diff Gasket
before installation!
Diff
Flui
d
81381
Diff Shim 81012
6x8x0.20mm 17mm
Outdrive,
bl a c k
88
#65 ease
gr
Center Diff
!
Align pin with
groove in sun gear
81389
91564
B3.1e
8x16x5
Plastic Spur
Bearing
Gear, 46T
81381
Diff Shim 81012
6x8x0.20mm 17mm
bla
88
#65 ease
ck g
r
Outdrive,
Center Diff !
Align pin with
groove in sun gear
81384
Diff
Gasket ! 89208 x4
3x14mm
FHCS
Racer’s Tip:
Use black grease
88 (#6588) to coat
#65 ease
c k gr the Diff Gasket
bl a
before installation!
Diff
Flui
d
Racer’s Tip:
Fill diff above the cross Center Diff Fluid:
pins, below the planet
gears as shown.
5,000cst #5453
25201 25201
3x8mm 3x8mm
FHCS FHCS
31541 x2
3x6mm
25201 x2 25201 81262 x2 #1596
FHCS
3x8mm 3x8mm 4x10mm thread
lock
FHCS FHCS FHCS
8
:: Steering / Chassis Build - Bag 2.1, 2.2 - Step 2
81084
Servo
Saver
Tube
Racer’s Tip: 81084 x2
Use black grease 81083 Servo Saver
(#6588) to lube
Servo Tube Shim
the bellcrank halves
before installation! Saver
Spring
81086
Steering
Bellcrank
81084 1.5mm
81086 Servo Saver
Steering Tube Spring
Bellcrank Nut & O-Ring
3x10mm 1
Bearing 2
BHCS 3
4
5
81086 81089
Steering Steering
Bellcrank Rack
8680 x4
5x8x2.5mm 81397 x2
Bearing Turnbuckle
Ball, 4mm
25201 x2 6
#159
3x8mm th r e a d loc
k
FHCS
9
:: Front Gearbox Build - Bag 3.1, 3.2 - Step 1
91561 x2
81015 6x12x4mm
Gearbox, Bearing
(Inboard)
ck
ad 96
lo
re 5
Racer’s Tip:
th #1
Use black grease 89221
(#6588) to 5x4mm
lube the Diff Pinion Set Screw
before installation!
81003
Diff Pinion 81020
Gear, 13T Center
Universal,
(76mm)
81015
Dust Cap 4675
2.5x6mm
FHCS
81381
!
Step 1:
Diff Shim Add shims on this side to
13.5x15.8x0.20mm TIGHTEN gear mesh.
Subtract shims on this side
STEP 1 88
#65 ease
g r to LOOSEN gear mesh.
lac k
81015 b
Gearbox, Step 2:
Add or subtract shims here
25620 x2 (Outboard)
to finalize diff side to side
3x10mm play once gear mesh is
SHCS set from Step 1.
Recommended diff side to
!
side clearance (gearbox
assembly) 0.10 - 0.25mm.
81015 81259
Anti-Roll STEP 2 Notes:
2.5x18mm 0.1mm shim can be used for
Bar Cap BHCS fine tuning of gear mesh
81292
RC8B3.1 Arm
Mount (B)
81054
Front Arm
Shim, 1mm
81260 x2 81054
81050 x2 Front Arm,
4x14mm
!
Arm Mount Lower
BHCS Insert,
Center
Note that each arm is
81060 89317 marked with a R for the
Hinge Droop Right Arm or an L for
Pin Screw the Left Arm.
10
:: Front Gearbox Build - Bag 3.1, 3.2 - Step 4
Kit Setup: 81112
89214 Body Post,
4x12mm Front
FHCS
81030
Top Plate
81291 89216
RC8B3.1 M4
Arm Mount Locknut,
(A) Black 25201
3x8mm
FHCS
81032
81260 x2 Chassis
81050 x2
4x14mm Brace,
Arm Mount
BHCS Front
Insert, Center
ck
ad 6
re 59
FHCS
lo
FHCS 3x24mm Insert,
th #1
SHCS Center
th #1
re 59 54
ad 6
lo
32
ck 1
81050 x2
Arm Mount
Insert,
Center,
Outside
81196 x2 81026
81049 Shock Shock Tower,
Upper Link Bushing Front
Mount
89214 x4
81060
81055
!
Note that each arm is
81055 Hinge Pin,
4x12mm Caster Clip, Front marked with a R for the
Front Upper Right Arm or an L for
FHCS 1.0mm Upper Arms
Short the Left Arm.
11
:: Front Uprights Build - Bag 4.1, 4.2 - Step 1
89096
Wheel
Hex Pin
91566 25225
81328
15x21x4mm 3x3mm
CVA
ck
ad 96
Bearing
lo
Set Screw
th #15
Coupler
re
#6
bla 5
ck 88
gre
ase
81079
81326 Wheel Hex,
81394
CVA Axle, +1mm Wide
CVA Drive
Steel 89221
Shaft (94mm) 91565 5x4mm
81328 81065 8x16x5mm Set Screw
CVA Coupler Steering Bearing,
Pin Block Flanged
!
Tighten pillow ball nut
81070 x2
(#81070) until pillow ball Pillow
(#81067) begins to bind,
81065 x2 Ball Nut, 81397
then loosen until pillow ball Pillow Aluminum Turnbuckle
moves freely. Ball Cap Ball, 4mm
81072 x1
Pillow
Ball Shim
(0.7mm)
12
:: Front Uprights Build - Bag 4.1, 4.2 - Step 4
81113
81262 x2 #159
Front
threa 6
4x10mm d loc
k
Bumper
FHCS
89216
M4
Locknut,
Black
81264 x2
4x20mm
FHCS
89214 89214 x2
4x12mm 4x12mm
FHCS FHCS
ck
ad 96
lo
re 5
89221
th #1
Racer’s Tip: 5x4mm
Use black grease Set Screw
(#6588) to
lube the Diff Pinion
before installation!
81003 81021
Diff Pinion Center
Gear, 13T Universal,
(106mm)
81015
Dust Cap 4675
2.5x6mm
FHCS
!
TIGHTEN gear mesh.
81381 Subtract shims on this side
Diff Shim 88
to LOOSEN gear mesh.
#65 ease
13.5x15.8x0.20mm STEP 1 a c k gr
bl
81015 Step 2:
Gearbox, Add or subtract shims here
to finalize diff side to side
(Outboard) play once gear mesh is
25620 x2 set from Step 1.
3x10mm Recommended diff side to
SHCS
!
side clearance (gearbox
assembly) 0.10 - 0.25mm.
81015
Anti-Roll 81259 STEP 2 Notes:
Bar Cap 2.5x18mm 0.1mm shim can be used for
BHCS fine tuning of gear mesh.
13
:: Rear Gearbox Build - Bag 5.1, 5.2 - Step 3
Kit Setup: Note that each arm is
!
81059 marked with a R for the
81293 Right Arm or an L for
Rear Arm 81058 the Left Arm.
RC8B3.1 Arm Mud Guard Rear Arm
Mount (C)
81050 x2
Arm Mount
Insert,
Center
31531 x2
3x6mm
81260 x2 BHCS 89317
4x14mm Droop
BHCS Screw
81058
Rear Arm
Shim, 1mm
81060 81294
Hinge RC8B3.1
Pin, Long Arm
Mount
(D)
81260 x2
81050 x2
4x14mm
Arm Mount
BHCS
Insert,
Center, Down
81032 25612
Chassis M3
Brace, Locknut
Rear W/Flange
Black
14
:: Rear Gearbox Build - Bag 5.1, 5.2 - Step 6
81027 25211 x2 81196 x2
Shock 3x10mm Shock
Kit Setup: Tower, BHCS 25203 Bushing
Rear 3x12mm
4 5 FHCS
23
1 59
6
81112 #1 d loc
a
k
r e
Body t h
Post,
Rear
3 6 89225 x2 #1
59
2 5 81397 x2 thr
ead 6
1 4 3x24mm loc
Turnbuckle k
SHCS
Ball
81108
Wing
Mount, 25187 x2
Low 3x14mm
BHCS 25215 x2
25215 x2 M3
M3 Locknut,
Locknut Black
81263 x2
4x16mm
FHCS
89214 x2
4x12mm
FHCS
15
:: Rear Uprights / Turnbuckles Build - Bag 5.2, 6.1 - Step 1
91566 89096
15x21x4mm Wheel
81394 Hex Pin
Bearing
CVA Drive
Shaft
(94mm)
ock
81075
6
81328
thr 159
dl
#6
bla 5
ck 88 CVA Rear
ea
#
gre
ase
Coupler Hub
25225
3x3mm
Set Screw 81079
81328
CVA Wheel Hex,
91565 +1mm Wide
Coupler 81326 8x16x5mm 89221
Pin CVA Axle, Bearing, 5x4mm
Steel Flanged Set Screw
81075
Rear Hub
Shim, 2.5mm Rear Hub Turnbuckle
81076 15.50mm (0.61”)
Hub Hinge
Pin
25612 81075
81075
M3 Locknut Rear Hub
Rear Hub
w/Flange Shim, 1.5mm
Shim, 1.0mm
89204
3x24mm
BHCS 81264
4x20mm
FHCS
25612 89214 x3
M3 Locknut 4x12mm
w/Flange FHCS
16
:: Rear Uprights / Turnbuckles Build - Bag 5.2, 6.1 - Step 4
81093 89526 81093
Rod End, 4x50mm Rod End,
4mm Turnbuckle 4mm
Steering Turnbuckle
24.90mm (0.98”)
!
Note direction
81304
RC8B3e
Bulkhead
Cover
81304
RC8B3e 6
59 ck
Wire Guide #1 d lo
e a
thr
81262 x4
31448 4x10mm
2.5x8mm FHCS
FHCS
Motor
pinion not
included!
81300
RC8B3e Motor 31532 x2
Mount Slide 3x8mm
25224 BHCS
4x4mm
Set Screw
17
:: Anti-Roll Bar Build - Bag 8.1 - Step 1
81150 89203 x2
81150 x2 Steering Turnbuckles
Anti-Roll 3x16mm
Anti-Roll
!
removed
Bar Pivot BHCS for view clarity.
Bar Rod
End
81258
!
3x12mm
Set Screw
! (Front) Anti-Roll
Bar, Black 2.3mm
Center the Anti-Roll
Bar Collet on the 81140
Anti-Roll Bar, then (Rear) Anti-Roll
tighten the (#25225) Bar, Blue 2.7mm
3x3mm set screw.
81150
! th #15
re
ad 96
lo
ck
Anti-Roll
Bar
Front Anti-Roll
Bar Gap: 2.3mm
Collet
96
#15 ock
ad l
thre
96
#15 ock
ad l
25225 x2 thre
89203 x2
3x3mm 3x16mm
Set Screw BHCS
31521 x2
2.5x8mm 81257 x2
BHCS 3x6mm
Set Screw
! !
Tighten #81257 set screws
just enough to still allow the Rear Hub Turnbuckles and mud guards
anti-roll bar to move freely. removed for view clarity.
18
:: Anti-Roll Bar Build - Bag 8.1 - Step 4
#1596
25225 x2 thread lock
3x3mm
ck
ad 6
Set Screw
re 59
lo
t h #1
31521 x2
2.5x8mm
BHCS
81257 x2
3x6mm
! !
Set Screw
Rear Hub Turnbuckles Tighten #81257 set screws just enough to
removed for view clarity. still allow the anti-roll bar to move freely.
81179
k
81181 Bleeder oc
sh id
Shock Cap Cap flu
Insert
Front Shock Fluid:
35wt #5429
!
Seal,
Bleeder
Cap
When installing the
shock cap seal, make
sure it is correctly
seated within the
shock cap as shown.
19
:: Shocks Build - Bag 9.1, 9.2 - Step 3
91492
2x4mm
BHCS
! !
Compress shock shaft fully.
91492
Gasket
Secure cap to body but Let shock fluid bleed from the
do not over tighten! bleeder hole.
!
Some residual shock
fluid may appear from
your first few runs
around the shock cap
as a result of bleeding.
!
Spring
81221 Cup,
Spring 20mm
The springs come
with a colored Collar, 20mm
marking pre-installed
for easy identification”
k
oc 81225
sh id
fl u
V2 Front Spring,
Blue (5.50lb/in)
81231
V2 Rear Spring,
Blue (4.30lb/in)
25612 25612
M3 Locknut M3 Locknut
W/ Flange, W/ Flange
Black
81197 81197
81257 Shock 81257
Shock
3x6mm Pin 3x6mm
Pin
Set Screw Set Screw
20
:: Battery Tray Build - Bag 10.1, 10.2 - Step 1
81298
ESC not
RC8B3e included!
Battery Foam 6727
Servo
Tape
89506 x2
Hook and Loop
Battery Strap
81297
RC8B3e
Battery Tray
!
Then run the hook and loop straps
as shown.
81263 x2 81262 x3
4x16mm 4x10mm
FHCS FHCS
21
:: Servo Horns / Linkage Build - Bag 11.1, 11.2 - Step 1
89218 x4 Receiver
25187 x4 3x8mm Transponder not included!
3x14mm
BHCS
Washer
!
When spacing your
not included!
6727 x2
Servo not servos, make sure the Servo
included! servo does not touch
9907 Tape
the chassis when
Grommet installed.
Plug
89023 x2
Servo
Spacer
9907
Receiver 81303 81262 x2
Box Receiver 4x10mm
Grommet Box FHCS
81250
Servo Horn
91050 Insert
HD Ball
Stud, 12mm
4617
Printed here 2mm Shim
A - Airtronics
Steering Servo Turnbuckle F - Futaba
81250
11.50mm (0.45”) H - Hitec
Servo Horn
J - JR/KO
Large Ring
!
Wheels, Tires, and Foam
Inserts Not Included!
89296
#15
CA t
97
ire g
lue !
RC8 Wheels, Build four
white, 83mm wheels/
tires
Tires:
When gluing tires to wheels, use a fast-curing
tire glue (CA) (AE #1597). This is available at
your local hobby shop. Make sure to clean the
mounting surface of the tire and wheel with
alchohol for best adhesion.
! !
Install wheel nuts (#81082) Install wheel nuts (#81082)
with the serrated edge with the serrated edge
towards the wheel. towards the wheel.
81082 81082
Wheel Nuts, Wheel Nuts,
17mm 17mm
(Blue) (Blue)
Front Droop: Increasing front droop (loosen droop screws) will increase off-throttle steering. It also allows the
front end to lift more, giving more rear grip and less front grip on-power. Remember to never loosen the screws beyond
the FULL DROOP setting. Decreasing front droop (tighten droop screws) yields more on-power steering and quicker
response at the expense of some stability in bumpy sections. It will also give less off-throttle steering.
Rear Droop: Increasing rear droop (loosen droop screws) will increase traction in bumpy sections, but will reduce
high-speed stability. Remember to never loosen the screws beyond the FULL DROOP setting. Decreasing rear droop
(tighten droop screws) will increase stability in high speed sections, but will reduce stability in bumpy sections.
Setup Sheets:
Most often the best way to get your car handling right is to go to our website www.rc10.com and click on the
“Setup Sheets” link, then the link to your vehicle, then search for your vehicle. Our team of professional drivers help
develop these setups at National events. Also, most drivers have a “base” setup that they use as a starting point for ev-
ery event. Try running some of our base setups OR look for track conditions and tires that are similar to your local track
and mimic that setup. Remember, each adjustment has a purpose, so copy everything from the setup sheet and then
make adjustments based on the recommendations in here at http://www.rc10.com/rc/tuning.
24
:: Shocks :: Shock Fluid
81156 RC8B3 Shock Kit (Front) 1 5420 10 Weight Silicone Shock Fluid 2oz.
81157 RC8B3 Shock Kit (Rear) 1 5421 20 Weight Silicone Shock Fluid 2oz.
81160 RC8B3 Shock Body, 30.5mm 2 5422 30 Weight Silicone Shock Fluid 2oz.
81161 RC8B3 Shock Body, 39.5mm 2 5423 40 Weight Silicone Shock Fluid 2oz.
81170 RC8B3 Shock Shaft, 30.5mm 2 5424 22.5 Weight Silicone Shock Fluid 2oz.
81171 RC8B3 Shock Shaft, 39.5mm 2 5425 80 Weight Silicone Shock Fluid 2oz.
81179 RC8B3 Bleeder Shock Cap 2 5426 27.5 Weight Silicone Shock Fluid 2oz.
81181 RC8B3 Shock Cap Insert 2 5427 15 Weight Silicone Shock Fluid 2oz.
81182 RC8B3 Shock Bladder 2 5428 25 Weight Silicone Shock Fluid 2oz.
81185 RC8B3 Shock Rebuild Kit 2 5429 35 Weight Silicone Shock Fluid 2oz.
81186 RC8B3 Shock O-Ring 8 5430 45 Weight Silicone Shock Fluid 2oz.
81188 RC8B3 Shock Body Seal Retainer 2 5431 55 Weight Silicone Shock Fluid 2oz.
81190 RC8B3 Shock Boots 4 5432 32.5 Weight Silicone Shock Fluid 2oz.
81194 RC8B3 Shock Rod End & Spring Cup, 20mm 4 5433 37.5 Weight Silicone Shock Fluid 2oz.
81200 RC8B3 Shock Pistons 2 ea. 5434 42.5 Weight Silicone Shock Fluid 2oz.
(6x1.3 - KIT, 6x1.3 T, 8x1.2 T) 5435 50 Weight Silicone Shock Fluid 2oz.
81221 Spring Collars, 20mm 2 5436 60 Weight Silicone Shock Fluid 2oz.
89215 Shock Piston Locknut 10 5437 70 Weight Silicone Shock Fluid 2oz.
89278 Washer, 2.5mm 20 5438 47.5 Weight Silicone Shock Fluid 2oz.
91492 12mm V2 Bleeder Screw / Gasket 2
89215 81181
89278
81179 81221
81200
89278
81182 81221
Front:
81170
Front:
Rear: 81160
81171 Kit Front:
Rear: 81225
81161
Kit Rear:
81231
81185
81190
81186
81185
81186
81194
81185
81193
81188
81193
:: Springs
81222 Front Spring, V2, 4.9lb/in, Green Pr.
81223 Front Spring, V2, 5.1lb/in, White Pr.
81224 Front Spring, V2, 5.3lb/in, Gray Pr.
81225 Front Spring, V2, 5.5lb/in, Blue - KIT Pr.
81226 Front Spring, V2, 5.7lb/in, Yellow Pr.
81229 Rear Spring, V2, 4.1lb/in, White Pr.
81230 Rear Spring, V2, 4.2lb/in, Gray Pr.
81231 Rear Spring, V2, 4.3lb/in, Blue - KIT Pr.
81232 Rear Spring, V2, 4.4lb/in, Yellow Pr.
25
:: Front / Rear Gear Differential :: Center Gear Differential
81002 RC8B3 Diff Ring Gear, 44T 1 81012 Diff Outdrives, 17mm, Center Diff 2
81008 Diff Outdrives, 15mm, Rear Diff 2 81379 RC8B3.1 Differential Case 1
81012 Diff Outdrives, 17mm, Front Diff 2 81380 RC8B3.1 Differential Gear Set 1
81379 RC8B3.1 Differential Case 1 81381 RC8B3.1 Differential Shim Set 1
81380 RC8B3.1 Differential Gear Set 1 81383 RC8B3.1 Differential Gear Set (LTC) 1
81381 RC8B3.1 Differential Shim Set 1 81384 RC8B3.1 Differential Gasket 3
81383 RC8B3.1 Differential Gear Set (LTC) 1 81385 RC8B3.1 Differential O-Ring Set 1
81384 RC8B3.1 Differential Gasket 3 81389 RC8B3.1e Plastic Spur Gear, 46T - KIT 1
81385 RC8B3.1 Differential O-Ring Set 1 89208 3 x 14mm FHCS 10
89208 3 x 14mm FHCS 10 91564 8 x 16 x 5 Bearings 2
91564 8 x 16 x 5 Bearings 2
81008 - Rear
81012
81012 - Front
81380
81381 81381
81380 91564 81380 91564
81381 81385
81381 81380
81381
81379 81385
89208 89208
81379
91564
81381 81002 91564 81389
81380
81381 81380 81381
81381
81384 81384
81012
81008 - Rear 81385 81385
81012 - Front
81380 81380
81380 81380
:: Center Bulkhead
25211 3 x 10mm BHCS 20
25224 M4 x 4mm Set Screw 20
31448 2.5 x 8mm FHCS 6 25211
31532 3 x 8mm BHCS 6
81262 4 x 10mm FHCS 6 25211
81299 RC8B3e Motor Mount 1
25211
81300 RC8B3e Motor Mount Slide 1 25211
81304 RC8B3e Center Bulkhead / Cover / Guide 1
89206 4 x 10mm BHCS 10
89512 Pinion, 12T 1
89513 Pinion, 13T 1 81300 81304
89514 Pinion, 14T 1
89515 Pinion, 15T 1
89516 Pinion, 16T 1 89206
89517 Pinion, 17T 1
89593 Pinion, 18T 1 89206
89594 Pinion, 19T 1 31532
89595 Pinion, 20T 1
31532
81299
25224 81304
89514
81262 81262
81304
31448
26
:: Front Gearbox
4675 2.5 x 6mm FHCS 6
25620 3 x 10mm SHCS 20 89221
31521 2.5 x 8mm BHCS 6
81003 RC8B3 Diff Pinion Gear, 13T 1
81015 RC8B3 Gearbox 2 81015
81020 RC8B3 Center Universal, 76mm 1
81020
81050 RC8B3 Arm Mount Insert 12 ea.
81054 RC8B3 Front Arms/Shims Pr.
81003 91561
81060 RC8B3 Hinge Pin Set 1
81113 RC8B3 Front Bumper 1 25620
81257 3 x 6mm Set Screw 6
31521
81259 2.5 x 18mm BHCS 6 91561
81260 4 x 14mm BHCS 6
81264 4 x 20mm FHCS 6 81015
81291 RC8B3.1 Arm Mount, A 1 81015
81292 RC8B3.1 Arm Mount, B 1
89214 4 x 12mm FHCS 10 4675 81050
89221 5 x 4mm Set Screw 10
91561 Bearing, 6 x 12 x 4mm 2 81054
81259 81113
89214
81257 81260
31521
81264
81050 81060 81292
81291 81054
81050
81060
81260 81050
:: Rear Gearbox
4675 2.5 x 6mm FHCS 6 31521
25620 3 x 10mm SHCS 20 81259 81257
31521 2.5 x 8mm BHCS 10
81003 RC8B3 Diff Pinion Gear, 13T 1
81015 RC8B3 Gearbox 2 91561
81021 Center Universal, 106mm 1 81015
81050 RC8B3 Arm Mount Insert 12 ea.
81058 RC8B3 Rear Arms/Shims Pr.
81003 25620
81060 RC8B3 Hinge Pin Set 1 81015
81257 3 x 6mm Set Screw 6 81015
81259 2.5 x 18mm BHCS 6
81260 4 x 14mm BHCS 6
81264 4 x 20mm FHCS 6
81293 RC8B3.1 Arm Mount, C 1 91561
81294 RC8B3.1 Arm Mount, D 1
89214 4 x 12mm FHCS 10 89221
89221 5 x 4mm Set Screw 10
91561 Bearing, 6 x 12 x 4mm 2 81015
4675 81050
81260
81021 81264
89214 81294
81058
81050 81060
81293 81058
81050
81060
81050
81260
27
:: Steering
8680 FT Steering Bearing Set, 4 ea.
5 x 8 x 2.5mm & 6 x 10 x 3mm 31404
25201 3 x 8mm FHCS 20
25211 3 x 10mm BHCS 20 81084
31404 Bearing, 6 x 10 x 3mm 4
81083 Servo Saver Spring 1
81084 RC8B3.1 Servo Saver Tube 1
81086 RC8B3 Steering Bellcrank 1 81083
81088 RC8B3 Steering Bellcrank Nut 2 81088
81089 RC8B3 Steering Rack 1
81091 RC8B3 Steering Post 2 8680 81084
81262 4 x 10mm FHCS 10
81397 Turnbuckle Ball, 4mm 4 81086 81084
31404
8680 81084 81088
81086 8680
81084
81086
31404 8680
81091 31404
25211
81089 25211
81262 81091
81397
25201
81262
81397
25201
81196
89225 25612 25211
25203
81026
25211
81196
89225
2208 89214
81050
25612 81112 81027
89214
28
:: Front Suspension
25202 3 x 10mm FHCS 20
25211 3 x 10mm BHCS 20
25225 3 x 3mm Set Screw 20 81055 81060
81054 RC8B3 Front Arms Pr.
81055 RC8B3 Front Upper Arms Pr. 81072
81056 RC8B3 Suspension Arm Endcap 4 81055
81060 RC8B3 Hinge Pin Set 1
81063 RC8B3 Steering Block Arm +2 deg Pr. 81056
81065 RC8B3 Steering Block Pr.
81067 RC8B3 Pillow Ball 2
81070
81055
RC8B3 Pillow Ball Nut 4 25211
81072 RC8B3 Pillow Ball Shim 6 81067
81079 RC8B3 Wheel Hexes, +1mm wide 2 25202
81082
81394 81093
RC8B3 Wheel Nuts, 17mm Blue 2
81093 RC8B3 Rod End, 4mm (4 ball joints, 1
2 rod ends, 2 offset rod ends) 81326 89526
81197 RC8B3 Shock Pin 4
81063
91566 81397
81257 3 x 6mm Set Screw 6
81326 RC8B3 CVA Axle, steel 2
81328
81328 FT RC8B3 CVA Rebuild Kit 1
81257 81093
81394 RC8B3.1 CVA Driveshaft (94mm) 2 81328
81397 RC8B3.1 Turnbuckle Ball 4 81070
89096 81054
Wheel Hex Pin 4 25225 81065
89203 3 x 16mm BHCS 10 89203 89096
89221 5 x 4mm Set Screw 10
89317 Droop Screw 8 81065
89526 4 x 50mm Turnbuckle 2 81065 81079
91565 8 x 16 x 5 Flanged Bearing 4
91566 15 x 21 x4mm Bearing 2
81197 81070
89317
91565 81082
81056 81067
81072 89221
:: Rear Suspension
25225 3 x 3mm Set Screw 20
25612 M3 Flanged Locknut
81398
31531 3 x 6mm BHCS 6 81094
81058 RC8B3 Rear Arm Pr.
81059 RC8B3 Rear Arm Mud Guard Pr.
89269
81075 RC8B3 Rear Hub Pr.
81328
81076 RC8B3 Hub Hinge Pin 2 81094
81079 RC8B3 Wheel Hexes, +1mm wide 2 81394 81398
81082 RC8B3 Wheel Nuts, 17mm Blue 2
81094 RC8B3 Rod End, 5mm (4 ball joints, 1
2 rod ends, 2 offset rod ends)
81326
81197 RC8B3 Shock Pin 4 81075 89204
81257 3 x 6mm Set Screw 6
81328
81326 RC8B3 CVA Axle, steel 2 91566
81328 FT RC8B3 CVA Rebuild Kit 1 81075
81394 RC8B3.1 CVA Driveshaft (94mm) 2 25612
81398 RC8B3.1 TB Ball (Shouldered) 4 89096
89096 Wheel Hex Pin 4 25225
89203 3 x 16mm BHCS 10 81075 81079
89204 3 x 24mm BHCS 10 91565 89221
89221 5 x 4mm Set Screw 10 81257
89269 Steel Turnbuckle, 38mm 2 89317 81197
89317 Droop Screw 8
91565 8 x 16 x 5mm Flanged Bearing 4 81082
91566 15 x 21 x4mm Bearing 2 81059
81076
81058
89203 25612
31531
31531
29
:: Radio Tray / Servo Linkage
1401 Turnbuckle, 3 x 33mm 2
4617 Front Bulkhead Shims 4 ea. 9907
6338 Antenna Tube with Cap, Black 1
9907 Receiver Box Grommets 2 ea.
25187 3 x 14mm BHCS 20
25188 3 x 20mm BHCS
25202 3 x 10mm FHCS 20
25187
25215 M3 Locknut, Black 20 31448 89218
25225 3 x 3mm Set Screw 20 25187
31448 2.5 x 8mm FHCS 6 25202 31448
81250 RC8B3 Servo Horns 1
25215 89218
81262 4 x 10mm FHCS 6
81303 RC8B3e Servo / Receiver Box 1 31448
89023 Servo Mount Spacers 1 81250 89023
89218 3 x 8mm Washer 10
91048 HD Ballstuds, 8mm 8 4617
91050 HD Ballstuds, 12mm 8 89023
91453 HD Ball Cup Set, small 1
81250
81303
91048
91453
81303
1401
81250
25225
6338
91453 81262
6338 91050
81262
4617
:: Battery Tray
81262 4 x 10mm FHCS 6
81263 4 x 16mm FHCS 6
81297 RC8B3e Battery Tray 1
81298
81298 RC8B3e Battery Foams 1
89506 Hook and Loop Fastener 3 81298
Battery Strap
89506
81298
81298
81298
81298
89506
81297 81262
81262
81263 81262
81263
30
:: Front Chassis Brace :: Rear Chassis Brace
2208 Large Hood Pins 6 25188 3 x 20mm BHCS 20
25201 3 x 8mm FHCS 20 25215 M3 Locknut, Black 20
81030 RC8B3 Top Plate 1 81032 RC8B3 Chassis Brace Pr.
81032 RC8B3 Chassis Brace Pr. 89214 4 x 12mm FHCS 10
81049 RC8B3 Upper Link Mount 1 89216 M4 Locknut 10
81050 RC8B3 Arm Mount Insert 12 ea.
81112 RC8B3 Body Post Pr.
81262 4 x 10mm FHCS 6
89214 4 x 12mm FHCS 10
89216 M4 Locknut 10
2208
89214
81112 89214
81262 25188
25201
81032
25215
89214
81032
81030
25201 81032
81049
89216 89216
89214
89214
81050 89216
:: Chassis
25201 3 x 8mm FHCS 20
31541 3 x 6mm FHCS 6
81001 RC8B3 Side Guards Pr.
81295 RC8B3e Chassis 1
81001
25201
31541
31541
25201
25201
81295 81001
31541
25201
31
:: Anti-Roll Bars :: Wing
25225 3 x 3mm Set Screw 20 25187 3 x 14mm BHCS 20
81130 RC8B3 Front Anti-Roll Bars, 1 ea. 25203 3 x 12mm FHCS 20
(2.3 - Black, 2.4 - Green, 2.5 - White) 25215 M3 Locknut, Black 20
81131 RC8B3 Front Anti-Roll Bars, 1 ea. 81106 RC8B3 Wing, Black (1 wing, 2 wing buttons) 1
(2.6 - Gray, 2.7 - Blue, 2.8 - Yellow 81108 RC8B3 Wing Mount, 1 high, 1 low 1 ea.
81140 RC8B3 Rear Anti-Roll Bars, 1 ea. 81263 4 x 16mm FHCS 6
(2.5 - White, 2.6 - Gray, 2.7 - Blue)
81141 RC8B3 Rear Anti-Roll Bars, 1 ea.
(2.8 - Yellow, 2.9 - Red, 3.0 - Orange) 25203
81150 RC8B3 Anti-Roll Bar Drop Link / Collet 1
81106
81258 3 x 12mm Set Screw 6
81106
81150 81106
81258
81130 81150
81131 25215
81140
81150 81263
81141
25225
81108
81150 25215
25225
25187
81150