Professional Documents
Culture Documents
AAXX
not permitted without written authorization from Alcatel.
document, use and communication of its contents
All rights reserved. Passing on and copying of this
1 Function
This unit is used to apply a 2 Mbit/s signal to a duplicated transmission path : selection of
the transmission path can be realized manually (local or remote command) or
automatically according to the detected alarms on each path.
DOCC:
MMCC:
20030627
1 : LOUTG120Y
2 : LOUTG120Z
3 : LOUTG120G
4 : LING120Y
5 : LING120Z
6 : LING120G
7 : Safety ground
8 : Safety ground
Front connector H : Link II input and output signals at 120 Ω (for 75 Ω use
connectors G and I)
1 : LINB120Y
2 : LINB120Z
3 : LINB120G
4 : LOUTB120Y
5 : LOUTB120Z
6 : LOUTB120G
7 : Safety ground
8 : Safety ground
1 : LINA120Y
2 : LINA120Z
3 : LINA120G
4 : LOUTA120Y
5 : LOUTA120Z
6 : LOUTA120G
7 : Safety ground
8 : Safety ground
input/output impedance 75 Ω 75 75
input/output impedance 120 Ω 120 120
Jumpers :
The following jumpers are foreseen for factory test purposes only :
X269 position A : +5V coming from on board DC/DC
X269 position B : +5V coming from backpanel.
Push buttom :
Microcontroller Reset only used for factory test purposes.
Reset buttom
L S 414
S 415
S 429 S 442
K S 430 S 456
75 75
J
120 120
line A input line A output
S 514
S 515
S 529 S 542
H S 530 S 556
75 75 A B
120 120
G X269
line B input line B output
S 342
F S 356
S 314 B
S 315 75
S 329 1A F253
E 120
S 330
G.703 output
75
D
120
G.703 input