Professional Documents
Culture Documents
Written Examination
Demonstration with
Observation with
Questioning
Questioning
Portfolio
The evidence must show that the candidate …
Plan and prepare for tasks to be undertaken
Prepare hand tools
Use appropriate hand tools and test equipment
Maintain hand tools
to show if evidence
is demonstrated
During the demonstration of skills, the candidate: Yes No N/A
Tasks to be undertaken are properly identified
Appropriate hand tools are identified and selected according to the
task requirements
Appropriate hand tools are checked for proper operation and
safety
Unsafe or faulty tools are identified and marked for repair
according to standard company procedure
Tools are used according to tasks undertaken
All safety procedures in using tools are observed at all times and
appropriate personal protective equipment (PPE) are used
Malfunctions, unplanned or unusual events are reported to the
assessor
Tools are not dropped to avoid damage
Routine maintenance of tools undertaken according to standard
operational procedures, principles and techniques
Tools are stored safely in appropriate locations in accordance with
manufacturer’s specifications or standard operating procedures
Candidate’s name:
Trainer’s name:
QUALIFICATION Computer System Serving NC-II
Unit of competency: Using hand tools
Instructions for the Trainer:
1. Observe the candidate
2. Describe the assessment activity and the date on which it was undertaken.
3. Place a tick in the box to show that the candidate completed each aspect of the
activity to the standard expected in the enterprise.
4. Complete the feedback sections of the form.
Date of observation
Location of assessment Assessment Area
activity
The candidate…. If yes, tick the
box
Hand tools
Personal Protective Equipment (PPE)
Maintenance
7. Maintenance of tools
8. Storage of Tools
Feedback to candidate
Candidate’s
Date:
signature:
Assessor’s
Date:
signature:
Candidate’s Name:
Trainer’s Name:
Qualification: Computer System Serving NC-II
Title of competency Using hand tools
assessment
Units of Competency Use hand tools
covered:
Date of Assessment
Assessment Center
The performance of the candidate in the following Satisfactory Not
assessment methods: [Pls. Tick (/) appropriate box] Satisfactory
A. Observation with questioning
B. Demonstration with questioning
C. Portfolio
D. Written Examination
Did the candidate overall performance meet the
required evidences / standards?
Recommendation
For re-assessment. _____________________________________
For submission of document. Pls. specify (Portfolio Document)
_______________________
For issuance of certificate. Pls. Specify (Qualification, NC Level )
_____________________