Professional Documents
Culture Documents
Uses: After spraying AT-CURE WR200 creates secondary hydration within the concrete which densifies the
substrate to retain the mix water. As a result, the relative humidity remains almost unchanged and provides
optimum hydration for strength and durability. It is suitable for all general concrete applications –
Airport Runways
Highways, Taxiways
Roof decks, Retaining walls
Bridge works
Coverage: 10-15sq meters per kg depending on the texture of surface, wind velocity, humidity and
temperature.
Application: AT-CURE WR200 requires no mixing, diluting or agitation. Application should begin as soon as
the concrete is free from surface water and can support foot movement without leaving marks. Two thin even
layer of AT-CURE WR200 has to be applied to the whole surface using a hand operated low pressure spray
gun. Immediately after the first coat is dry apply second coat. For larger areas application can be done by
power driven automatic equipment. The concrete surface should not be disturbed until it has achieved
sufficient strength. In the case of hardened concrete i.e. after de-molding of form work, the surface of
concrete should be sprayed with water to saturate it prior to the application of AT-CURE WR200. After
spraying all equipments, shall be cleaned with fresh water.
Technical Data:
Precautions for Use: ATPL products are generally harmless. Avoid prolonged contact with skin. In the event
of contact with skin, wash with clean water immediately. Use rubber gloves while applying the product.
Warranty: ATPL products are manufactured under stringent Quality Control following National/International Quality Standard Specifications
and are guaranteed against any manufacturing defect. However, we can accept no liability, as the conditions of use of such products are
beyond our control. This data is provided in the belief that is accurate within generally accepted standards and is provided for the
information of qualified personnel. It does not constitute an offer by the manufacturer. Nor does the manufacturer warrant or guarantee its
accuracy or completeness in describing the performance or suitability of the various products. The users therefore should make their own
determination in using the product of the data contained herein for any application.