Professional Documents
Culture Documents
o Suspension tower
o Tension towers
o Terminal towers (187)
o Angle towers
3)In the design of the overhead line towers, the wind span represents:
4)The funnel flow with hopper outlet configuration for single silo disharging centrally is represented
in figure:
1 2 3
(425) 2-funnel flow with
hopper
5)The elastic behavior of double layers grids assumes that:
6)The effect of ice deposits is introduced in the design if space lattice towers by :
7)The features of ice deposits on the structures (in terms of magnitude, density, placing, shape)
depend:
8)The ability of the double layer grid structures to sustain the design load with the loss of members
defines:
10)The projected area used in the evaluation of the wind loads on space lattice towers, project the
following bracing members are included
12)
3-5-2-1-6-4 (197)
13)Select the correct set of failure modes for the grid structure in the figure:
o 1-
14)Which of the following do not represents basic elements for developing double layers…
o Octahedron units
o Planar latticed trusses
o Tetrahedron units
o Spherical units (316)
15)The buckling resistance checks are ULS for space lattice tower members is given by the relation:
N Ed
≤1
N b , Rd
o1
o2
o3
o 4 Evident
16)For the double layer grid with the plan in the figure, the critical members are:
o 1
o 2
o 3
o 4 (332)
17)
o 1= suspension tower
o 2=angle suspension tower
o 3= angle tower
o 4=tension tower
o 5= terminal tower (146)
18)For the design of storage steel tanks, the specific gravity of water is equal to:
o 10
o 0.1
o 100
o 1 ( AICI CRED CA NE TREBUIE UNITATEA DE MASURA, APA DOAR E 1000 KG/MC at 4 degree
Celsius )
19)The loss of the members initiating the non-linear behavior of double layers grids may be caused
by: 2 raspunsuri aici
21)In the relevant plane, the system length used when evaluating the slenderness of lattice tower
members represents:
o The geometric length of a member between intersection points not providing restraint
o The geometric length of a member between intersection points providing restraint (251)
o The geometric length of a member free of restrain points
o The geometric length of a member with multiple restraint points
22)In the design of the overhead line towers, the weight span represents:
23)The geometric parameters involved in setting the height of the tower above ground are:
o The maximum electrical clearance, the minimum sag of the conductor, the length of the
insulator assembly
o The minimum electrical clearance, sag of the conductor and length of the insulator assembly
o The minimum distance between electrical clearance and sag of the conductor, the maximum
length of the insulator assembly
o The minimum electrical clearance, the maximum sag of the conductor, the length of the
insulator assembly (198)
24)In the Linear Static analysis of double layer grid structures, actual the elastic load in the member is
determined by: ( 2 raspunsuri )
o Self-weight
o Concentrated load load conditions
o Uniformly distributed vertical load conditions
o Asymmetric loading conditions ( toate sunt corecte ? see 472 imaginea )