This document contains the results of an ISO 12217-1 flotation test for a vessel with an assumed crew limit of 85. Various parameters were tested and passed including swamped stability, swamped buoyancy, and flotation material requirements. The vessel obtained a PASS for its design category of C, indicating it meets flotation and stability standards.
This document contains the results of an ISO 12217-1 flotation test for a vessel with an assumed crew limit of 85. Various parameters were tested and passed including swamped stability, swamped buoyancy, and flotation material requirements. The vessel obtained a PASS for its design category of C, indicating it meets flotation and stability standards.
This document contains the results of an ISO 12217-1 flotation test for a vessel with an assumed crew limit of 85. Various parameters were tested and passed including swamped stability, swamped buoyancy, and flotation material requirements. The vessel obtained a PASS for its design category of C, indicating it meets flotation and stability standards.
Preparation : Item Unit Response Ref. Mass equal to 25% of dry stores and equipment added ? YES/NO YES E.2 a) Inboard or outboard engine fitted? inboard If inboard fitted, correct engine replacement mass fitted ? YES/NO YES E.2 d) Assumed outboard engine power n x kW 134 E.2 c) Mass fitted to represent outboard engine, controls and battery kg 400 Tables E1 and E.2 Portable fuel tanks removed and/or fixed tanks are filled YES/NO NO E.2 f) Cockpit drains open and drain plugs are fitted ? YES/NO YES E.2 g) Void compartments which are not air tanks are opened ? YES/NO NO E,2 i) Number of integral air tanks required to be opened Tabla E.3 Type of test weights used : lead, 65/35 brass, steel, cast iron, aluminium Material factor d 0 Table E.4
Swamped stability test :
Item Unit Response Ref. Dry mass of test weights = 6d CL but ≥ 15d kg 100 Table E.6 Test weight hung from gunwale each of four positions in turn ? YES/NO YES E.3.1 5 min after swamping, boat heels less than 45º ? PASS/FAIL PASS E.3.4 + E.3.5
Swamped buoyancy test :
Item Unit Response Ref. Load test : E.4 Mass of maximum total load mMTL kg 1580 3.4.2 + sheet 1 Design Category assessed C Dry mass of test weights used kg Table E.5 5 min after swamping, boat floats approximately level with more than 2/3 of E.4.3 periphery above water ? PASS/FAIL
Flotation material and elements :
Item Response Ref. All flotation elements comply with all trhe requirements PASS/FAIL Table F.1
Design Category given : NB : boat must obtain PASS three times in above tables