Professional Documents
Culture Documents
: 20UCC062
Experiment no. 1
A. Aim: In this experiment we will get acquainted with basic electrical and electronic
tools/components like breadboard, DSO, power supply, resistor etc. We will use these
tools to test a simple voltage divider circuit for a DC and AC voltage input.
Observations:
DC- 12V
1.1 Circuit diagram (10K and 10K)
Calculations:
1.2
Simulation screenshot with node A voltage
1.2a) Circuit diagram (10k 10k 10k 10k)
Calculations:
Simulation Screenshot with node A and B voltages
1.2b) Circuit diagram (10k 10k 1k 1k)
Calculations:
Simulation screenshot with node voltages A and B:
1.2C) Circuit diagram (10k 10k 100k 100k)
Calculations:
Simulation screenshot with node voltages A and B:
Observation table:
Calculation:
Simulation Screenshot showing node Voltage A and B
2.2a) Circuit diagram (10k 10k 10k 10k)
Calculations:
Simulation Screenshot showing node Voltage A and B
2.2b) Circuit diagram (10k 10k 1k 1k)
Calculations:
Simulation Screenshot showing node Voltage A and B
2.2c) Circuit diagram (10k 10k 100k 100k)
Calculations:
Simulation Screenshot showing node Voltage A and B
Calculations:
Simulation screenshot showing nodes A,B and C voltages, and pot percent
Conclusions:
1) Designing of basic elementary circuits using multisim
2) Application of OHM’s law and usage of nodal analysis
3) Potentiometer Applications
4) Study of different kind of circuits